From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../it_IT/process/volatile-considered-harmful.rst | 134 +++++++++++++++++++++ 1 file changed, 134 insertions(+) create mode 100644 Documentation/translations/it_IT/process/volatile-considered-harmful.rst (limited to 'Documentation/translations/it_IT/process/volatile-considered-harmful.rst') diff --git a/Documentation/translations/it_IT/process/volatile-considered-harmful.rst b/Documentation/translations/it_IT/process/volatile-considered-harmful.rst new file mode 100644 index 000000000..efc640cac --- /dev/null +++ b/Documentation/translations/it_IT/process/volatile-considered-harmful.rst @@ -0,0 +1,134 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/volatile-considered-harmful.rst ` +:Translator: Federico Vaga + +.. _it_volatile_considered_harmful: + +Perché la parola chiave "volatile" non dovrebbe essere usata +------------------------------------------------------------ + +Spesso i programmatori C considerano volatili quelle variabili che potrebbero +essere cambiate al di fuori dal thread di esecuzione corrente; come risultato, +a volte saranno tentati dall'utilizzare *volatile* nel kernel per le +strutture dati condivise. In altre parole, gli è stato insegnato ad usare +*volatile* come una variabile atomica di facile utilizzo, ma non è così. +L'uso di *volatile* nel kernel non è quasi mai corretto; questo documento ne +descrive le ragioni. + +Il punto chiave da capire su *volatile* è che il suo scopo è quello di +sopprimere le ottimizzazioni, che non è quasi mai quello che si vuole. +Nel kernel si devono proteggere le strutture dati condivise contro accessi +concorrenti e indesiderati: questa è un'attività completamente diversa. +Il processo di protezione contro gli accessi concorrenti indesiderati eviterà +anche la maggior parte dei problemi relativi all'ottimizzazione in modo più +efficiente. + +Come *volatile*, le primitive del kernel che rendono sicuro l'accesso ai dati +(spinlock, mutex, barriere di sincronizzazione, ecc) sono progettate per +prevenire le ottimizzazioni indesiderate. Se vengono usate opportunamente, +non ci sarà bisogno di utilizzare *volatile*. Se vi sembra che *volatile* sia +comunque necessario, ci dev'essere quasi sicuramente un baco da qualche parte. +In un pezzo di codice kernel scritto a dovere, *volatile* può solo servire a +rallentare le cose. + +Considerate questo tipico blocco di codice kernel:: + + spin_lock(&the_lock); + do_something_on(&shared_data); + do_something_else_with(&shared_data); + spin_unlock(&the_lock); + +Se tutto il codice seguisse le regole di sincronizzazione, il valore di un +dato condiviso non potrebbe cambiare inaspettatamente mentre si trattiene un +lock. Un qualsiasi altro blocco di codice che vorrà usare quel dato rimarrà +in attesa del lock. Gli spinlock agiscono come barriere di sincronizzazione +- sono stati esplicitamente scritti per agire così - il che significa che gli +accessi al dato condiviso non saranno ottimizzati. Quindi il compilatore +potrebbe pensare di sapere cosa ci sarà nel dato condiviso ma la chiamata +spin_lock(), che agisce come una barriera di sincronizzazione, gli imporrà di +dimenticarsi tutto ciò che sapeva su di esso. + +Se il dato condiviso fosse stato dichiarato come *volatile*, la +sincronizzazione rimarrebbe comunque necessaria. Ma verrà impedito al +compilatore di ottimizzare gli accessi al dato anche _dentro_ alla sezione +critica, dove sappiamo che in realtà nessun altro può accedervi. Mentre si +trattiene un lock, il dato condiviso non è *volatile*. Quando si ha a che +fare con dei dati condivisi, un'opportuna sincronizzazione rende inutile +l'uso di *volatile* - anzi potenzialmente dannoso. + +L'uso di *volatile* fu originalmente pensato per l'accesso ai registri di I/O +mappati in memoria. All'interno del kernel, l'accesso ai registri, dovrebbe +essere protetto dai lock, ma si potrebbe anche desiderare che il compilatore +non "ottimizzi" l'accesso ai registri all'interno di una sezione critica. +Ma, all'interno del kernel, l'accesso alla memoria di I/O viene sempre fatto +attraverso funzioni d'accesso; accedere alla memoria di I/O direttamente +con i puntatori è sconsigliato e non funziona su tutte le architetture. +Queste funzioni d'accesso sono scritte per evitare ottimizzazioni indesiderate, +quindi, di nuovo, *volatile* è inutile. + +Un'altra situazione dove qualcuno potrebbe essere tentato dall'uso di +*volatile*, è nel caso in cui il processore è in un'attesa attiva sul valore +di una variabile. Il modo giusto di fare questo tipo di attesa è il seguente:: + + while (my_variable != what_i_want) + cpu_relax(); + +La chiamata cpu_relax() può ridurre il consumo di energia del processore +o cedere il passo ad un processore hyperthreaded gemello; funziona anche come +una barriera per il compilatore, quindi, ancora una volta, *volatile* non è +necessario. Ovviamente, tanto per puntualizzare, le attese attive sono +generalmente un atto antisociale. + +Ci sono comunque alcune rare situazioni dove l'uso di *volatile* nel kernel +ha senso: + + - Le funzioni d'accesso sopracitate potrebbero usare *volatile* su quelle + architetture che supportano l'accesso diretto alla memoria di I/O. + In pratica, ogni chiamata ad una funzione d'accesso diventa una piccola + sezione critica a se stante, e garantisce che l'accesso avvenga secondo + le aspettative del programmatore. + + - I codice *inline assembly* che fa cambiamenti nella memoria, ma che non + ha altri effetti espliciti, rischia di essere rimosso da GCC. Aggiungere + la parola chiave *volatile* a questo codice ne previene la rimozione. + + - La variabile jiffies è speciale in quanto assume un valore diverso ogni + volta che viene letta ma può essere lette senza alcuna sincronizzazione. + Quindi jiffies può essere *volatile*, ma l'aggiunta ad altre variabili di + questo è sconsigliata. Jiffies è considerata uno "stupido retaggio" + (parole di Linus) in questo contesto; correggerla non ne varrebbe la pena e + causerebbe più problemi. + + - I puntatori a delle strutture dati in una memoria coerente che potrebbe + essere modificata da dispositivi di I/O può, a volte, essere legittimamente + *volatile*. Un esempio pratico può essere quello di un adattatore di rete + che utilizza un puntatore ad un buffer circolare, questo viene cambiato + dall'adattatore per indicare quali descrittori sono stati processati. + +Per la maggior parte del codice, nessuna delle giustificazioni sopracitate può +essere considerata. Di conseguenza, l'uso di *volatile* è probabile che venga +visto come un baco e porterà a verifiche aggiuntive. Gli sviluppatori tentati +dall'uso di *volatile* dovrebbero fermarsi e pensare a cosa vogliono davvero +ottenere. + +Le modifiche che rimuovono variabili *volatile* sono generalmente ben accette +- purché accompagnate da una giustificazione che dimostri che i problemi di +concorrenza siano stati opportunamente considerati. + +Riferimenti +=========== + +[1] http://lwn.net/Articles/233481/ + +[2] http://lwn.net/Articles/233482/ + +Crediti +======= + +Impulso e ricerca originale di Randy Dunlap + +Scritto da Jonathan Corbet + +Migliorato dai commenti di Satyam Sharma, Johannes Stezenbach, Jesper +Juhl, Heikki Orsila, H. Peter Anvin, Philipp Hahn, e Stefan Richter. -- cgit v1.2.3