From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/userspace-api/media/rc/rc-tables.rst | 759 +++++++++++++++++++++ 1 file changed, 759 insertions(+) create mode 100644 Documentation/userspace-api/media/rc/rc-tables.rst (limited to 'Documentation/userspace-api/media/rc/rc-tables.rst') diff --git a/Documentation/userspace-api/media/rc/rc-tables.rst b/Documentation/userspace-api/media/rc/rc-tables.rst new file mode 100644 index 000000000..28ed94088 --- /dev/null +++ b/Documentation/userspace-api/media/rc/rc-tables.rst @@ -0,0 +1,759 @@ +.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later + +.. _Remote_controllers_tables: + +************************ +Remote controller tables +************************ + +Unfortunately, for several years, there was no effort to create uniform +IR keycodes for different devices. This caused the same IR keyname to be +mapped completely differently on different IR devices. This resulted +that the same IR keyname to be mapped completely different on different +IR's. Due to that, V4L2 API now specifies a standard for mapping Media +keys on IR. + +This standard should be used by both V4L/DVB drivers and userspace +applications + +The modules register the remote as keyboard within the linux input +layer. This means that the IR key strokes will look like normal keyboard +key strokes (if CONFIG_INPUT_KEYBOARD is enabled). Using the event +devices (CONFIG_INPUT_EVDEV) it is possible for applications to access +the remote via /dev/input/event devices. + + +.. _rc_standard_keymap: + +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}| + +.. flat-table:: IR default keymapping + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + + - .. row 1 + + - Key code + + - Meaning + + - Key examples on IR + + - .. row 2 + + - **Numeric keys** + + - .. row 3 + + - ``KEY_NUMERIC_0`` + + - Keyboard digit 0 + + - 0 + + - .. row 4 + + - ``KEY_NUMERIC_1`` + + - Keyboard digit 1 + + - 1 + + - .. row 5 + + - ``KEY_NUMERIC_2`` + + - Keyboard digit 2 + + - 2 + + - .. row 6 + + - ``KEY_NUMERIC_3`` + + - Keyboard digit 3 + + - 3 + + - .. row 7 + + - ``KEY_NUMERIC_4`` + + - Keyboard digit 4 + + - 4 + + - .. row 8 + + - ``KEY_NUMERIC_5`` + + - Keyboard digit 5 + + - 5 + + - .. row 9 + + - ``KEY_NUMERIC_6`` + + - Keyboard digit 6 + + - 6 + + - .. row 10 + + - ``KEY_NUMERIC_7`` + + - Keyboard digit 7 + + - 7 + + - .. row 11 + + - ``KEY_NUMERIC_8`` + + - Keyboard digit 8 + + - 8 + + - .. row 12 + + - ``KEY_NUMERIC_9`` + + - Keyboard digit 9 + + - 9 + + - .. row 13 + + - **Movie play control** + + - .. row 14 + + - ``KEY_FORWARD`` + + - Instantly advance in time + + - >> / FORWARD + + - .. row 15 + + - ``KEY_BACK`` + + - Instantly go back in time + + - <<< / BACK + + - .. row 16 + + - ``KEY_FASTFORWARD`` + + - Play movie faster + + - >>> / FORWARD + + - .. row 17 + + - ``KEY_REWIND`` + + - Play movie back + + - REWIND / BACKWARD + + - .. row 18 + + - ``KEY_NEXT`` + + - Select next chapter / sub-chapter / interval + + - NEXT / SKIP + + - .. row 19 + + - ``KEY_PREVIOUS`` + + - Select previous chapter / sub-chapter / interval + + - << / PREV / PREVIOUS + + - .. row 20 + + - ``KEY_AGAIN`` + + - Repeat the video or a video interval + + - REPEAT / LOOP / RECALL + + - .. row 21 + + - ``KEY_PAUSE`` + + - Pause stream + + - PAUSE / FREEZE + + - .. row 22 + + - ``KEY_PLAY`` + + - Play movie at the normal timeshift + + - NORMAL TIMESHIFT / LIVE / > + + - .. row 23 + + - ``KEY_PLAYPAUSE`` + + - Alternate between play and pause + + - PLAY / PAUSE + + - .. row 24 + + - ``KEY_STOP`` + + - Stop stream + + - STOP + + - .. row 25 + + - ``KEY_RECORD`` + + - Start/stop recording stream + + - CAPTURE / REC / RECORD/PAUSE + + - .. row 26 + + - ``KEY_CAMERA`` + + - Take a picture of the image + + - CAMERA ICON / CAPTURE / SNAPSHOT + + - .. row 27 + + - ``KEY_SHUFFLE`` + + - Enable shuffle mode + + - SHUFFLE + + - .. row 28 + + - ``KEY_TIME`` + + - Activate time shift mode + + - TIME SHIFT + + - .. row 29 + + - ``KEY_TITLE`` + + - Allow changing the chapter + + - CHAPTER + + - .. row 30 + + - ``KEY_SUBTITLE`` + + - Allow changing the subtitle + + - SUBTITLE + + - .. row 31 + + - **Image control** + + - .. row 32 + + - ``KEY_BRIGHTNESSDOWN`` + + - Decrease Brightness + + - BRIGHTNESS DECREASE + + - .. row 33 + + - ``KEY_BRIGHTNESSUP`` + + - Increase Brightness + + - BRIGHTNESS INCREASE + + - .. row 34 + + - ``KEY_ANGLE`` + + - Switch video camera angle (on videos with more than one angle + stored) + + - ANGLE / SWAP + + - .. row 35 + + - ``KEY_EPG`` + + - Open the Elecrowonic Play Guide (EPG) + + - EPG / GUIDE + + - .. row 36 + + - ``KEY_TEXT`` + + - Activate/change closed caption mode + + - CLOSED CAPTION/TELETEXT / DVD TEXT / TELETEXT / TTX + + - .. row 37 + + - **Audio control** + + - .. row 38 + + - ``KEY_AUDIO`` + + - Change audio source + + - AUDIO SOURCE / AUDIO / MUSIC + + - .. row 39 + + - ``KEY_MUTE`` + + - Mute/unmute audio + + - MUTE / DEMUTE / UNMUTE + + - .. row 40 + + - ``KEY_VOLUMEDOWN`` + + - Decrease volume + + - VOLUME- / VOLUME DOWN + + - .. row 41 + + - ``KEY_VOLUMEUP`` + + - Increase volume + + - VOLUME+ / VOLUME UP + + - .. row 42 + + - ``KEY_MODE`` + + - Change sound mode + + - MONO/STEREO + + - .. row 43 + + - ``KEY_LANGUAGE`` + + - Select Language + + - 1ST / 2ND LANGUAGE / DVD LANG / MTS/SAP / MTS SEL + + - .. row 44 + + - **Channel control** + + - .. row 45 + + - ``KEY_CHANNEL`` + + - Go to the next favorite channel + + - ALT / CHANNEL / CH SURFING / SURF / FAV + + - .. row 46 + + - ``KEY_CHANNELDOWN`` + + - Decrease channel sequentially + + - CHANNEL - / CHANNEL DOWN / DOWN + + - .. row 47 + + - ``KEY_CHANNELUP`` + + - Increase channel sequentially + + - CHANNEL + / CHANNEL UP / UP + + - .. row 48 + + - ``KEY_DIGITS`` + + - Use more than one digit for channel + + - PLUS / 100/ 1xx / xxx / -/-- / Single Double Triple Digit + + - .. row 49 + + - ``KEY_SEARCH`` + + - Start channel autoscan + + - SCAN / AUTOSCAN + + - .. row 50 + + - **Colored keys** + + - .. row 51 + + - ``KEY_BLUE`` + + - IR Blue key + + - BLUE + + - .. row 52 + + - ``KEY_GREEN`` + + - IR Green Key + + - GREEN + + - .. row 53 + + - ``KEY_RED`` + + - IR Red key + + - RED + + - .. row 54 + + - ``KEY_YELLOW`` + + - IR Yellow key + + - YELLOW + + - .. row 55 + + - **Media selection** + + - .. row 56 + + - ``KEY_CD`` + + - Change input source to Compact Disc + + - CD + + - .. row 57 + + - ``KEY_DVD`` + + - Change input to DVD + + - DVD / DVD MENU + + - .. row 58 + + - ``KEY_EJECTCLOSECD`` + + - Open/close the CD/DVD player + + - -> ) / CLOSE / OPEN + + - .. row 59 + + - ``KEY_MEDIA`` + + - Turn on/off Media application + + - PC/TV / TURN ON/OFF APP + + - .. row 60 + + - ``KEY_PC`` + + - Selects from TV to PC + + - PC + + - .. row 61 + + - ``KEY_RADIO`` + + - Put into AM/FM radio mode + + - RADIO / TV/FM / TV/RADIO / FM / FM/RADIO + + - .. row 62 + + - ``KEY_TV`` + + - Select tv mode + + - TV / LIVE TV + + - .. row 63 + + - ``KEY_TV2`` + + - Select Cable mode + + - AIR/CBL + + - .. row 64 + + - ``KEY_VCR`` + + - Select VCR mode + + - VCR MODE / DTR + + - .. row 65 + + - ``KEY_VIDEO`` + + - Alternate between input modes + + - SOURCE / SELECT / DISPLAY / SWITCH INPUTS / VIDEO + + - .. row 66 + + - **Power control** + + - .. row 67 + + - ``KEY_POWER`` + + - Turn on/off computer + + - SYSTEM POWER / COMPUTER POWER + + - .. row 68 + + - ``KEY_POWER2`` + + - Turn on/off application + + - TV ON/OFF / POWER + + - .. row 69 + + - ``KEY_SLEEP`` + + - Activate sleep timer + + - SLEEP / SLEEP TIMER + + - .. row 70 + + - ``KEY_SUSPEND`` + + - Put computer into suspend mode + + - STANDBY / SUSPEND + + - .. row 71 + + - **Window control** + + - .. row 72 + + - ``KEY_CLEAR`` + + - Stop stream and return to default input video/audio + + - CLEAR / RESET / BOSS KEY + + - .. row 73 + + - ``KEY_CYCLEWINDOWS`` + + - Minimize windows and move to the next one + + - ALT-TAB / MINIMIZE / DESKTOP + + - .. row 74 + + - ``KEY_FAVORITES`` + + - Open the favorites stream window + + - TV WALL / Favorites + + - .. row 75 + + - ``KEY_MENU`` + + - Call application menu + + - 2ND CONTROLS (USA: MENU) / DVD/MENU / SHOW/HIDE CTRL + + - .. row 76 + + - ``KEY_NEW`` + + - Open/Close Picture in Picture + + - PIP + + - .. row 77 + + - ``KEY_OK`` + + - Send a confirmation code to application + + - OK / ENTER / RETURN + + - .. row 78 + + - ``KEY_ASPECT_RATIO`` + + - Select screen aspect ratio + + - 4:3 16:9 SELECT + + - .. row 79 + + - ``KEY_FULL_SCREEN`` + + - Put device into zoom/full screen mode + + - ZOOM / FULL SCREEN / ZOOM+ / HIDE PANNEL / SWITCH + + - .. row 80 + + - **Navigation keys** + + - .. row 81 + + - ``KEY_ESC`` + + - Cancel current operation + + - CANCEL / BACK + + - .. row 82 + + - ``KEY_HELP`` + + - Open a Help window + + - HELP + + - .. row 83 + + - ``KEY_HOMEPAGE`` + + - Navigate to Homepage + + - HOME + + - .. row 84 + + - ``KEY_INFO`` + + - Open On Screen Display + + - DISPLAY INFORMATION / OSD + + - .. row 85 + + - ``KEY_WWW`` + + - Open the default browser + + - WEB + + - .. row 86 + + - ``KEY_UP`` + + - Up key + + - UP + + - .. row 87 + + - ``KEY_DOWN`` + + - Down key + + - DOWN + + - .. row 88 + + - ``KEY_LEFT`` + + - Left key + + - LEFT + + - .. row 89 + + - ``KEY_RIGHT`` + + - Right key + + - RIGHT + + - .. row 90 + + - **Miscellaneous keys** + + - .. row 91 + + - ``KEY_DOT`` + + - Return a dot + + - . + + - .. row 92 + + - ``KEY_FN`` + + - Select a function + + - FUNCTION + + +It should be noted that, sometimes, there some fundamental missing keys +at some cheaper IR's. Due to that, it is recommended to: + + +.. _rc_keymap_notes: + +.. flat-table:: Notes + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - On simpler IR's, without separate channel keys, you need to map UP + as ``KEY_CHANNELUP`` + + - .. row 2 + + - On simpler IR's, without separate channel keys, you need to map + DOWN as ``KEY_CHANNELDOWN`` + + - .. row 3 + + - On simpler IR's, without separate volume keys, you need to map + LEFT as ``KEY_VOLUMEDOWN`` + + - .. row 4 + + - On simpler IR's, without separate volume keys, you need to map + RIGHT as ``KEY_VOLUMEUP`` -- cgit v1.2.3