From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/virt/coco/sev-guest.rst | 155 ++++++++++++++++++++++++++++++++++ 1 file changed, 155 insertions(+) create mode 100644 Documentation/virt/coco/sev-guest.rst (limited to 'Documentation/virt/coco/sev-guest.rst') diff --git a/Documentation/virt/coco/sev-guest.rst b/Documentation/virt/coco/sev-guest.rst new file mode 100644 index 000000000..bf593e88c --- /dev/null +++ b/Documentation/virt/coco/sev-guest.rst @@ -0,0 +1,155 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================================================== +The Definitive SEV Guest API Documentation +=================================================================== + +1. General description +====================== + +The SEV API is a set of ioctls that are used by the guest or hypervisor +to get or set a certain aspect of the SEV virtual machine. The ioctls belong +to the following classes: + + - Hypervisor ioctls: These query and set global attributes which affect the + whole SEV firmware. These ioctl are used by platform provisioning tools. + + - Guest ioctls: These query and set attributes of the SEV virtual machine. + +2. API description +================== + +This section describes ioctls that is used for querying the SEV guest report +from the SEV firmware. For each ioctl, the following information is provided +along with a description: + + Technology: + which SEV technology provides this ioctl. SEV, SEV-ES, SEV-SNP or all. + + Type: + hypervisor or guest. The ioctl can be used inside the guest or the + hypervisor. + + Parameters: + what parameters are accepted by the ioctl. + + Returns: + the return value. General error numbers (-ENOMEM, -EINVAL) + are not detailed, but errors with specific meanings are. + +The guest ioctl should be issued on a file descriptor of the /dev/sev-guest device. +The ioctl accepts struct snp_user_guest_request. The input and output structure is +specified through the req_data and resp_data field respectively. If the ioctl fails +to execute due to a firmware error, then fw_err code will be set otherwise the +fw_err will be set to 0x00000000000000ff. + +The firmware checks that the message sequence counter is one greater than +the guests message sequence counter. If guest driver fails to increment message +counter (e.g. counter overflow), then -EIO will be returned. + +:: + + struct snp_guest_request_ioctl { + /* Message version number */ + __u32 msg_version; + + /* Request and response structure address */ + __u64 req_data; + __u64 resp_data; + + /* firmware error code on failure (see psp-sev.h) */ + __u64 fw_err; + }; + +2.1 SNP_GET_REPORT +------------------ + +:Technology: sev-snp +:Type: guest ioctl +:Parameters (in): struct snp_report_req +:Returns (out): struct snp_report_resp on success, -negative on error + +The SNP_GET_REPORT ioctl can be used to query the attestation report from the +SEV-SNP firmware. The ioctl uses the SNP_GUEST_REQUEST (MSG_REPORT_REQ) command +provided by the SEV-SNP firmware to query the attestation report. + +On success, the snp_report_resp.data will contains the report. The report +contain the format described in the SEV-SNP specification. See the SEV-SNP +specification for further details. + +2.2 SNP_GET_DERIVED_KEY +----------------------- +:Technology: sev-snp +:Type: guest ioctl +:Parameters (in): struct snp_derived_key_req +:Returns (out): struct snp_derived_key_resp on success, -negative on error + +The SNP_GET_DERIVED_KEY ioctl can be used to get a key derive from a root key. +The derived key can be used by the guest for any purpose, such as sealing keys +or communicating with external entities. + +The ioctl uses the SNP_GUEST_REQUEST (MSG_KEY_REQ) command provided by the +SEV-SNP firmware to derive the key. See SEV-SNP specification for further details +on the various fields passed in the key derivation request. + +On success, the snp_derived_key_resp.data contains the derived key value. See +the SEV-SNP specification for further details. + + +2.3 SNP_GET_EXT_REPORT +---------------------- +:Technology: sev-snp +:Type: guest ioctl +:Parameters (in/out): struct snp_ext_report_req +:Returns (out): struct snp_report_resp on success, -negative on error + +The SNP_GET_EXT_REPORT ioctl is similar to the SNP_GET_REPORT. The difference is +related to the additional certificate data that is returned with the report. +The certificate data returned is being provided by the hypervisor through the +SNP_SET_EXT_CONFIG. + +The ioctl uses the SNP_GUEST_REQUEST (MSG_REPORT_REQ) command provided by the SEV-SNP +firmware to get the attestation report. + +On success, the snp_ext_report_resp.data will contain the attestation report +and snp_ext_report_req.certs_address will contain the certificate blob. If the +length of the blob is smaller than expected then snp_ext_report_req.certs_len will +be updated with the expected value. + +See GHCB specification for further detail on how to parse the certificate blob. + +3. SEV-SNP CPUID Enforcement +============================ + +SEV-SNP guests can access a special page that contains a table of CPUID values +that have been validated by the PSP as part of the SNP_LAUNCH_UPDATE firmware +command. It provides the following assurances regarding the validity of CPUID +values: + + - Its address is obtained via bootloader/firmware (via CC blob), and those + binaries will be measured as part of the SEV-SNP attestation report. + - Its initial state will be encrypted/pvalidated, so attempts to modify + it during run-time will result in garbage being written, or #VC exceptions + being generated due to changes in validation state if the hypervisor tries + to swap the backing page. + - Attempts to bypass PSP checks by the hypervisor by using a normal page, or + a non-CPUID encrypted page will change the measurement provided by the + SEV-SNP attestation report. + - The CPUID page contents are *not* measured, but attempts to modify the + expected contents of a CPUID page as part of guest initialization will be + gated by the PSP CPUID enforcement policy checks performed on the page + during SNP_LAUNCH_UPDATE, and noticeable later if the guest owner + implements their own checks of the CPUID values. + +It is important to note that this last assurance is only useful if the kernel +has taken care to make use of the SEV-SNP CPUID throughout all stages of boot. +Otherwise, guest owner attestation provides no assurance that the kernel wasn't +fed incorrect values at some point during boot. + + +Reference +--------- + +SEV-SNP and GHCB specification: developer.amd.com/sev + +The driver is based on SEV-SNP firmware spec 0.9 and GHCB spec version 2.0. -- cgit v1.2.3