From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/virt/kvm/devices/xive.rst | 247 ++++++++++++++++++++++++++++++++ 1 file changed, 247 insertions(+) create mode 100644 Documentation/virt/kvm/devices/xive.rst (limited to 'Documentation/virt/kvm/devices/xive.rst') diff --git a/Documentation/virt/kvm/devices/xive.rst b/Documentation/virt/kvm/devices/xive.rst new file mode 100644 index 000000000..8b5e7b40b --- /dev/null +++ b/Documentation/virt/kvm/devices/xive.rst @@ -0,0 +1,247 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================================== +POWER9 eXternal Interrupt Virtualization Engine (XIVE Gen1) +=========================================================== + +Device types supported: + - KVM_DEV_TYPE_XIVE POWER9 XIVE Interrupt Controller generation 1 + +This device acts as a VM interrupt controller. It provides the KVM +interface to configure the interrupt sources of a VM in the underlying +POWER9 XIVE interrupt controller. + +Only one XIVE instance may be instantiated. A guest XIVE device +requires a POWER9 host and the guest OS should have support for the +XIVE native exploitation interrupt mode. If not, it should run using +the legacy interrupt mode, referred as XICS (POWER7/8). + +* Device Mappings + + The KVM device exposes different MMIO ranges of the XIVE HW which + are required for interrupt management. These are exposed to the + guest in VMAs populated with a custom VM fault handler. + + 1. Thread Interrupt Management Area (TIMA) + + Each thread has an associated Thread Interrupt Management context + composed of a set of registers. These registers let the thread + handle priority management and interrupt acknowledgment. The most + important are : + + - Interrupt Pending Buffer (IPB) + - Current Processor Priority (CPPR) + - Notification Source Register (NSR) + + They are exposed to software in four different pages each proposing + a view with a different privilege. The first page is for the + physical thread context and the second for the hypervisor. Only the + third (operating system) and the fourth (user level) are exposed the + guest. + + 2. Event State Buffer (ESB) + + Each source is associated with an Event State Buffer (ESB) with + either a pair of even/odd pair of pages which provides commands to + manage the source: to trigger, to EOI, to turn off the source for + instance. + + 3. Device pass-through + + When a device is passed-through into the guest, the source + interrupts are from a different HW controller (PHB4) and the ESB + pages exposed to the guest should accommadate this change. + + The passthru_irq helpers, kvmppc_xive_set_mapped() and + kvmppc_xive_clr_mapped() are called when the device HW irqs are + mapped into or unmapped from the guest IRQ number space. The KVM + device extends these helpers to clear the ESB pages of the guest IRQ + number being mapped and then lets the VM fault handler repopulate. + The handler will insert the ESB page corresponding to the HW + interrupt of the device being passed-through or the initial IPI ESB + page if the device has being removed. + + The ESB remapping is fully transparent to the guest and the OS + device driver. All handling is done within VFIO and the above + helpers in KVM-PPC. + +* Groups: + +1. KVM_DEV_XIVE_GRP_CTRL + Provides global controls on the device + + Attributes: + 1.1 KVM_DEV_XIVE_RESET (write only) + Resets the interrupt controller configuration for sources and event + queues. To be used by kexec and kdump. + + Errors: none + + 1.2 KVM_DEV_XIVE_EQ_SYNC (write only) + Sync all the sources and queues and mark the EQ pages dirty. This + to make sure that a consistent memory state is captured when + migrating the VM. + + Errors: none + + 1.3 KVM_DEV_XIVE_NR_SERVERS (write only) + The kvm_device_attr.addr points to a __u32 value which is the number of + interrupt server numbers (ie, highest possible vcpu id plus one). + + Errors: + + ======= ========================================== + -EINVAL Value greater than KVM_MAX_VCPU_IDS. + -EFAULT Invalid user pointer for attr->addr. + -EBUSY A vCPU is already connected to the device. + ======= ========================================== + +2. KVM_DEV_XIVE_GRP_SOURCE (write only) + Initializes a new source in the XIVE device and mask it. + + Attributes: + Interrupt source number (64-bit) + + The kvm_device_attr.addr points to a __u64 value:: + + bits: | 63 .... 2 | 1 | 0 + values: | unused | level | type + + - type: 0:MSI 1:LSI + - level: assertion level in case of an LSI. + + Errors: + + ======= ========================================== + -E2BIG Interrupt source number is out of range + -ENOMEM Could not create a new source block + -EFAULT Invalid user pointer for attr->addr. + -ENXIO Could not allocate underlying HW interrupt + ======= ========================================== + +3. KVM_DEV_XIVE_GRP_SOURCE_CONFIG (write only) + Configures source targeting + + Attributes: + Interrupt source number (64-bit) + + The kvm_device_attr.addr points to a __u64 value:: + + bits: | 63 .... 33 | 32 | 31 .. 3 | 2 .. 0 + values: | eisn | mask | server | priority + + - priority: 0-7 interrupt priority level + - server: CPU number chosen to handle the interrupt + - mask: mask flag (unused) + - eisn: Effective Interrupt Source Number + + Errors: + + ======= ======================================================= + -ENOENT Unknown source number + -EINVAL Not initialized source number + -EINVAL Invalid priority + -EINVAL Invalid CPU number. + -EFAULT Invalid user pointer for attr->addr. + -ENXIO CPU event queues not configured or configuration of the + underlying HW interrupt failed + -EBUSY No CPU available to serve interrupt + ======= ======================================================= + +4. KVM_DEV_XIVE_GRP_EQ_CONFIG (read-write) + Configures an event queue of a CPU + + Attributes: + EQ descriptor identifier (64-bit) + + The EQ descriptor identifier is a tuple (server, priority):: + + bits: | 63 .... 32 | 31 .. 3 | 2 .. 0 + values: | unused | server | priority + + The kvm_device_attr.addr points to:: + + struct kvm_ppc_xive_eq { + __u32 flags; + __u32 qshift; + __u64 qaddr; + __u32 qtoggle; + __u32 qindex; + __u8 pad[40]; + }; + + - flags: queue flags + KVM_XIVE_EQ_ALWAYS_NOTIFY (required) + forces notification without using the coalescing mechanism + provided by the XIVE END ESBs. + - qshift: queue size (power of 2) + - qaddr: real address of queue + - qtoggle: current queue toggle bit + - qindex: current queue index + - pad: reserved for future use + + Errors: + + ======= ========================================= + -ENOENT Invalid CPU number + -EINVAL Invalid priority + -EINVAL Invalid flags + -EINVAL Invalid queue size + -EINVAL Invalid queue address + -EFAULT Invalid user pointer for attr->addr. + -EIO Configuration of the underlying HW failed + ======= ========================================= + +5. KVM_DEV_XIVE_GRP_SOURCE_SYNC (write only) + Synchronize the source to flush event notifications + + Attributes: + Interrupt source number (64-bit) + + Errors: + + ======= ============================= + -ENOENT Unknown source number + -EINVAL Not initialized source number + ======= ============================= + +* VCPU state + + The XIVE IC maintains VP interrupt state in an internal structure + called the NVT. When a VP is not dispatched on a HW processor + thread, this structure can be updated by HW if the VP is the target + of an event notification. + + It is important for migration to capture the cached IPB from the NVT + as it synthesizes the priorities of the pending interrupts. We + capture a bit more to report debug information. + + KVM_REG_PPC_VP_STATE (2 * 64bits):: + + bits: | 63 .... 32 | 31 .... 0 | + values: | TIMA word0 | TIMA word1 | + bits: | 127 .......... 64 | + values: | unused | + +* Migration: + + Saving the state of a VM using the XIVE native exploitation mode + should follow a specific sequence. When the VM is stopped : + + 1. Mask all sources (PQ=01) to stop the flow of events. + + 2. Sync the XIVE device with the KVM control KVM_DEV_XIVE_EQ_SYNC to + flush any in-flight event notification and to stabilize the EQs. At + this stage, the EQ pages are marked dirty to make sure they are + transferred in the migration sequence. + + 3. Capture the state of the source targeting, the EQs configuration + and the state of thread interrupt context registers. + + Restore is similar: + + 1. Restore the EQ configuration. As targeting depends on it. + 2. Restore targeting + 3. Restore the thread interrupt contexts + 4. Restore the source states + 5. Let the vCPU run -- cgit v1.2.3