From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/x86/mds.rst | 193 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 193 insertions(+) create mode 100644 Documentation/x86/mds.rst (limited to 'Documentation/x86/mds.rst') diff --git a/Documentation/x86/mds.rst b/Documentation/x86/mds.rst new file mode 100644 index 000000000..5d4330be2 --- /dev/null +++ b/Documentation/x86/mds.rst @@ -0,0 +1,193 @@ +Microarchitectural Data Sampling (MDS) mitigation +================================================= + +.. _mds: + +Overview +-------- + +Microarchitectural Data Sampling (MDS) is a family of side channel attacks +on internal buffers in Intel CPUs. The variants are: + + - Microarchitectural Store Buffer Data Sampling (MSBDS) (CVE-2018-12126) + - Microarchitectural Fill Buffer Data Sampling (MFBDS) (CVE-2018-12130) + - Microarchitectural Load Port Data Sampling (MLPDS) (CVE-2018-12127) + - Microarchitectural Data Sampling Uncacheable Memory (MDSUM) (CVE-2019-11091) + +MSBDS leaks Store Buffer Entries which can be speculatively forwarded to a +dependent load (store-to-load forwarding) as an optimization. The forward +can also happen to a faulting or assisting load operation for a different +memory address, which can be exploited under certain conditions. Store +buffers are partitioned between Hyper-Threads so cross thread forwarding is +not possible. But if a thread enters or exits a sleep state the store +buffer is repartitioned which can expose data from one thread to the other. + +MFBDS leaks Fill Buffer Entries. Fill buffers are used internally to manage +L1 miss situations and to hold data which is returned or sent in response +to a memory or I/O operation. Fill buffers can forward data to a load +operation and also write data to the cache. When the fill buffer is +deallocated it can retain the stale data of the preceding operations which +can then be forwarded to a faulting or assisting load operation, which can +be exploited under certain conditions. Fill buffers are shared between +Hyper-Threads so cross thread leakage is possible. + +MLPDS leaks Load Port Data. Load ports are used to perform load operations +from memory or I/O. The received data is then forwarded to the register +file or a subsequent operation. In some implementations the Load Port can +contain stale data from a previous operation which can be forwarded to +faulting or assisting loads under certain conditions, which again can be +exploited eventually. Load ports are shared between Hyper-Threads so cross +thread leakage is possible. + +MDSUM is a special case of MSBDS, MFBDS and MLPDS. An uncacheable load from +memory that takes a fault or assist can leave data in a microarchitectural +structure that may later be observed using one of the same methods used by +MSBDS, MFBDS or MLPDS. + +Exposure assumptions +-------------------- + +It is assumed that attack code resides in user space or in a guest with one +exception. The rationale behind this assumption is that the code construct +needed for exploiting MDS requires: + + - to control the load to trigger a fault or assist + + - to have a disclosure gadget which exposes the speculatively accessed + data for consumption through a side channel. + + - to control the pointer through which the disclosure gadget exposes the + data + +The existence of such a construct in the kernel cannot be excluded with +100% certainty, but the complexity involved makes it extremly unlikely. + +There is one exception, which is untrusted BPF. The functionality of +untrusted BPF is limited, but it needs to be thoroughly investigated +whether it can be used to create such a construct. + + +Mitigation strategy +------------------- + +All variants have the same mitigation strategy at least for the single CPU +thread case (SMT off): Force the CPU to clear the affected buffers. + +This is achieved by using the otherwise unused and obsolete VERW +instruction in combination with a microcode update. The microcode clears +the affected CPU buffers when the VERW instruction is executed. + +For virtualization there are two ways to achieve CPU buffer +clearing. Either the modified VERW instruction or via the L1D Flush +command. The latter is issued when L1TF mitigation is enabled so the extra +VERW can be avoided. If the CPU is not affected by L1TF then VERW needs to +be issued. + +If the VERW instruction with the supplied segment selector argument is +executed on a CPU without the microcode update there is no side effect +other than a small number of pointlessly wasted CPU cycles. + +This does not protect against cross Hyper-Thread attacks except for MSBDS +which is only exploitable cross Hyper-thread when one of the Hyper-Threads +enters a C-state. + +The kernel provides a function to invoke the buffer clearing: + + mds_clear_cpu_buffers() + +The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state +(idle) transitions. + +As a special quirk to address virtualization scenarios where the host has +the microcode updated, but the hypervisor does not (yet) expose the +MD_CLEAR CPUID bit to guests, the kernel issues the VERW instruction in the +hope that it might actually clear the buffers. The state is reflected +accordingly. + +According to current knowledge additional mitigations inside the kernel +itself are not required because the necessary gadgets to expose the leaked +data cannot be controlled in a way which allows exploitation from malicious +user space or VM guests. + +Kernel internal mitigation modes +-------------------------------- + + ======= ============================================================ + off Mitigation is disabled. Either the CPU is not affected or + mds=off is supplied on the kernel command line + + full Mitigation is enabled. CPU is affected and MD_CLEAR is + advertised in CPUID. + + vmwerv Mitigation is enabled. CPU is affected and MD_CLEAR is not + advertised in CPUID. That is mainly for virtualization + scenarios where the host has the updated microcode but the + hypervisor does not expose MD_CLEAR in CPUID. It's a best + effort approach without guarantee. + ======= ============================================================ + +If the CPU is affected and mds=off is not supplied on the kernel command +line then the kernel selects the appropriate mitigation mode depending on +the availability of the MD_CLEAR CPUID bit. + +Mitigation points +----------------- + +1. Return to user space +^^^^^^^^^^^^^^^^^^^^^^^ + + When transitioning from kernel to user space the CPU buffers are flushed + on affected CPUs when the mitigation is not disabled on the kernel + command line. The migitation is enabled through the static key + mds_user_clear. + + The mitigation is invoked in prepare_exit_to_usermode() which covers + all but one of the kernel to user space transitions. The exception + is when we return from a Non Maskable Interrupt (NMI), which is + handled directly in do_nmi(). + + (The reason that NMI is special is that prepare_exit_to_usermode() can + enable IRQs. In NMI context, NMIs are blocked, and we don't want to + enable IRQs with NMIs blocked.) + + +2. C-State transition +^^^^^^^^^^^^^^^^^^^^^ + + When a CPU goes idle and enters a C-State the CPU buffers need to be + cleared on affected CPUs when SMT is active. This addresses the + repartitioning of the store buffer when one of the Hyper-Threads enters + a C-State. + + When SMT is inactive, i.e. either the CPU does not support it or all + sibling threads are offline CPU buffer clearing is not required. + + The idle clearing is enabled on CPUs which are only affected by MSBDS + and not by any other MDS variant. The other MDS variants cannot be + protected against cross Hyper-Thread attacks because the Fill Buffer and + the Load Ports are shared. So on CPUs affected by other variants, the + idle clearing would be a window dressing exercise and is therefore not + activated. + + The invocation is controlled by the static key mds_idle_clear which is + switched depending on the chosen mitigation mode and the SMT state of + the system. + + The buffer clear is only invoked before entering the C-State to prevent + that stale data from the idling CPU from spilling to the Hyper-Thread + sibling after the store buffer got repartitioned and all entries are + available to the non idle sibling. + + When coming out of idle the store buffer is partitioned again so each + sibling has half of it available. The back from idle CPU could be then + speculatively exposed to contents of the sibling. The buffers are + flushed either on exit to user space or on VMENTER so malicious code + in user space or the guest cannot speculatively access them. + + The mitigation is hooked into all variants of halt()/mwait(), but does + not cover the legacy ACPI IO-Port mechanism because the ACPI idle driver + has been superseded by the intel_idle driver around 2010 and is + preferred on all affected CPUs which are expected to gain the MD_CLEAR + functionality in microcode. Aside of that the IO-Port mechanism is a + legacy interface which is only used on older systems which are either + not affected or do not receive microcode updates anymore. -- cgit v1.2.3