From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/alpha/kernel/sys_eb64p.c | 238 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 238 insertions(+) create mode 100644 arch/alpha/kernel/sys_eb64p.c (limited to 'arch/alpha/kernel/sys_eb64p.c') diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c new file mode 100644 index 000000000..3c43fd347 --- /dev/null +++ b/arch/alpha/kernel/sys_eb64p.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/alpha/kernel/sys_eb64p.c + * + * Copyright (C) 1995 David A Rusling + * Copyright (C) 1996 Jay A Estabrook + * Copyright (C) 1998, 1999 Richard Henderson + * + * Code supporting the EB64+ and EB66. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "proto.h" +#include "irq_impl.h" +#include "pci_impl.h" +#include "machvec_impl.h" + + +/* Note mask bit is true for DISABLED irqs. */ +static unsigned int cached_irq_mask = -1; + +static inline void +eb64p_update_irq_hw(unsigned int irq, unsigned long mask) +{ + outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26)); +} + +static inline void +eb64p_enable_irq(struct irq_data *d) +{ + eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq)); +} + +static void +eb64p_disable_irq(struct irq_data *d) +{ + eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq); +} + +static struct irq_chip eb64p_irq_type = { + .name = "EB64P", + .irq_unmask = eb64p_enable_irq, + .irq_mask = eb64p_disable_irq, + .irq_mask_ack = eb64p_disable_irq, +}; + +static void +eb64p_device_interrupt(unsigned long vector) +{ + unsigned long pld; + unsigned int i; + + /* Read the interrupt summary registers */ + pld = inb(0x26) | (inb(0x27) << 8); + + /* + * Now, for every possible bit set, work through + * them and call the appropriate interrupt handler. + */ + while (pld) { + i = ffz(~pld); + pld &= pld - 1; /* clear least bit set */ + + if (i == 5) { + isa_device_interrupt(vector); + } else { + handle_irq(16 + i); + } + } +} + +static void __init +eb64p_init_irq(void) +{ + long i; + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET) + /* + * CABRIO SRM may not set variation correctly, so here we test + * the high word of the interrupt summary register for the RAZ + * bits, and hope that a true EB64+ would read all ones... + */ + if (inw(0x806) != 0xffff) { + extern struct alpha_machine_vector cabriolet_mv; + + printk("Detected Cabriolet: correcting HWRPB.\n"); + + hwrpb->sys_variation |= 2L << 10; + hwrpb_update_checksum(hwrpb); + + alpha_mv = cabriolet_mv; + alpha_mv.init_irq(); + return; + } +#endif /* GENERIC */ + + outb(0xff, 0x26); + outb(0xff, 0x27); + + init_i8259a_irqs(); + + for (i = 16; i < 32; ++i) { + irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq); + irq_set_status_flags(i, IRQ_LEVEL); + } + + common_init_isa_dma(); + if (request_irq(16 + 5, no_action, 0, "isa-cascade", NULL)) + pr_err("Failed to register isa-cascade interrupt\n"); +} + +/* + * PCI Fixup configuration. + * + * There are two 8 bit external summary registers as follows: + * + * Summary @ 0x26: + * Bit Meaning + * 0 Interrupt Line A from slot 0 + * 1 Interrupt Line A from slot 1 + * 2 Interrupt Line B from slot 0 + * 3 Interrupt Line B from slot 1 + * 4 Interrupt Line C from slot 0 + * 5 Interrupt line from the two ISA PICs + * 6 Tulip + * 7 NCR SCSI + * + * Summary @ 0x27 + * Bit Meaning + * 0 Interrupt Line C from slot 1 + * 1 Interrupt Line D from slot 0 + * 2 Interrupt Line D from slot 1 + * 3 RAZ + * 4 RAZ + * 5 RAZ + * 6 RAZ + * 7 RAZ + * + * The device to slot mapping looks like: + * + * Slot Device + * 5 NCR SCSI controller + * 6 PCI on board slot 0 + * 7 PCI on board slot 1 + * 8 Intel SIO PCI-ISA bridge chip + * 9 Tulip - DECchip 21040 Ethernet controller + * + * + * This two layered interrupt approach means that we allocate IRQ 16 and + * above for PCI interrupts. The IRQ relates to which bit the interrupt + * comes in on. This makes interrupt processing much easier. + */ + +static int +eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static char irq_tab[5][5] = { + /*INT INTA INTB INTC INTD */ + {16+7, 16+7, 16+7, 16+7, 16+7}, /* IdSel 5, slot ?, ?? */ + {16+0, 16+0, 16+2, 16+4, 16+9}, /* IdSel 6, slot ?, ?? */ + {16+1, 16+1, 16+3, 16+8, 16+10}, /* IdSel 7, slot ?, ?? */ + { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */ + {16+6, 16+6, 16+6, 16+6, 16+6}, /* IdSel 9, TULIP */ + }; + const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5; + return COMMON_TABLE_LOOKUP; +} + + +/* + * The System Vector + */ + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P) +struct alpha_machine_vector eb64p_mv __initmv = { + .vector_name = "EB64+", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_APECS_IO, + .machine_check = apecs_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, + + .nr_irqs = 32, + .device_interrupt = eb64p_device_interrupt, + + .init_arch = apecs_init_arch, + .init_irq = eb64p_init_irq, + .init_rtc = common_init_rtc, + .init_pci = common_init_pci, + .kill_arch = NULL, + .pci_map_irq = eb64p_map_irq, + .pci_swizzle = common_swizzle, +}; +ALIAS_MV(eb64p) +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66) +struct alpha_machine_vector eb66_mv __initmv = { + .vector_name = "EB66", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_LCA_IO, + .machine_check = lca_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, + + .nr_irqs = 32, + .device_interrupt = eb64p_device_interrupt, + + .init_arch = lca_init_arch, + .init_irq = eb64p_init_irq, + .init_rtc = common_init_rtc, + .init_pci = common_init_pci, + .pci_map_irq = eb64p_map_irq, + .pci_swizzle = common_swizzle, +}; +ALIAS_MV(eb66) +#endif -- cgit v1.2.3