From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/alpha/kernel/sys_ruffian.c | 240 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 240 insertions(+) create mode 100644 arch/alpha/kernel/sys_ruffian.c (limited to 'arch/alpha/kernel/sys_ruffian.c') diff --git a/arch/alpha/kernel/sys_ruffian.c b/arch/alpha/kernel/sys_ruffian.c new file mode 100644 index 000000000..4b1c8d85c --- /dev/null +++ b/arch/alpha/kernel/sys_ruffian.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/alpha/kernel/sys_ruffian.c + * + * Copyright (C) 1995 David A Rusling + * Copyright (C) 1996 Jay A Estabrook + * Copyright (C) 1998, 1999, 2000 Richard Henderson + * + * Code supporting the RUFFIAN. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "proto.h" +#include "irq_impl.h" +#include "pci_impl.h" +#include "machvec_impl.h" + + +static void __init +ruffian_init_irq(void) +{ + /* Invert 6&7 for i82371 */ + *(vulp)PYXIS_INT_HILO = 0x000000c0UL; mb(); + *(vulp)PYXIS_INT_CNFG = 0x00002064UL; mb(); /* all clear */ + + outb(0x11,0xA0); + outb(0x08,0xA1); + outb(0x02,0xA1); + outb(0x01,0xA1); + outb(0xFF,0xA1); + + outb(0x11,0x20); + outb(0x00,0x21); + outb(0x04,0x21); + outb(0x01,0x21); + outb(0xFF,0x21); + + /* Finish writing the 82C59A PIC Operation Control Words */ + outb(0x20,0xA0); + outb(0x20,0x20); + + init_i8259a_irqs(); + + /* Not interested in the bogus interrupts (0,3,6), + NMI (1), HALT (2), flash (5), or 21142 (8). */ + init_pyxis_irqs(0x16f0000); + + common_init_isa_dma(); +} + +#define RUFFIAN_LATCH DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ) + +static void __init +ruffian_init_rtc(void) +{ + /* Ruffian does not have the RTC connected to the CPU timer + interrupt. Instead, it uses the PIT connected to IRQ 0. */ + + /* Setup interval timer. */ + outb(0x34, 0x43); /* binary, mode 2, LSB/MSB, ch 0 */ + outb(RUFFIAN_LATCH & 0xff, 0x40); /* LSB */ + outb(RUFFIAN_LATCH >> 8, 0x40); /* MSB */ + + outb(0xb6, 0x43); /* pit counter 2: speaker */ + outb(0x31, 0x42); + outb(0x13, 0x42); + + if (request_irq(0, rtc_timer_interrupt, 0, "timer", NULL)) + pr_err("Failed to request irq 0 (timer)\n"); +} + +static void +ruffian_kill_arch (int mode) +{ + cia_kill_arch(mode); +#if 0 + /* This only causes re-entry to ARCSBIOS */ + /* Perhaps this works for other PYXIS as well? */ + *(vuip) PYXIS_RESET = 0x0000dead; + mb(); +#endif +} + +/* + * Interrupt routing: + * + * Primary bus + * IdSel INTA INTB INTC INTD + * 21052 13 - - - - + * SIO 14 23 - - - + * 21143 15 44 - - - + * Slot 0 17 43 42 41 40 + * + * Secondary bus + * IdSel INTA INTB INTC INTD + * Slot 0 8 (18) 19 18 17 16 + * Slot 1 9 (19) 31 30 29 28 + * Slot 2 10 (20) 27 26 25 24 + * Slot 3 11 (21) 39 38 37 36 + * Slot 4 12 (22) 35 34 33 32 + * 53c875 13 (23) 20 - - - + * + */ + +static int +ruffian_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static char irq_tab[11][5] = { + /*INT INTA INTB INTC INTD */ + {-1, -1, -1, -1, -1}, /* IdSel 13, 21052 */ + {-1, -1, -1, -1, -1}, /* IdSel 14, SIO */ + {44, 44, 44, 44, 44}, /* IdSel 15, 21143 */ + {-1, -1, -1, -1, -1}, /* IdSel 16, none */ + {43, 43, 42, 41, 40}, /* IdSel 17, 64-bit slot */ + /* the next 6 are actually on PCI bus 1, across the bridge */ + {19, 19, 18, 17, 16}, /* IdSel 8, slot 0 */ + {31, 31, 30, 29, 28}, /* IdSel 9, slot 1 */ + {27, 27, 26, 25, 24}, /* IdSel 10, slot 2 */ + {39, 39, 38, 37, 36}, /* IdSel 11, slot 3 */ + {35, 35, 34, 33, 32}, /* IdSel 12, slot 4 */ + {20, 20, 20, 20, 20}, /* IdSel 13, 53c875 */ + }; + const long min_idsel = 13, max_idsel = 23, irqs_per_slot = 5; + return COMMON_TABLE_LOOKUP; +} + +static u8 +ruffian_swizzle(struct pci_dev *dev, u8 *pinp) +{ + int slot, pin = *pinp; + + if (dev->bus->number == 0) { + slot = PCI_SLOT(dev->devfn); + } + /* Check for the built-in bridge. */ + else if (PCI_SLOT(dev->bus->self->devfn) == 13) { + slot = PCI_SLOT(dev->devfn) + 10; + } + else + { + /* Must be a card-based bridge. */ + do { + if (PCI_SLOT(dev->bus->self->devfn) == 13) { + slot = PCI_SLOT(dev->devfn) + 10; + break; + } + pin = pci_swizzle_interrupt_pin(dev, pin); + + /* Move up the chain of bridges. */ + dev = dev->bus->self; + /* Slot of the next bridge. */ + slot = PCI_SLOT(dev->devfn); + } while (dev->bus->self); + } + *pinp = pin; + return slot; +} + +#ifdef BUILDING_FOR_MILO +/* + * The DeskStation Ruffian motherboard firmware does not place + * the memory size in the PALimpure area. Therefore, we use + * the Bank Configuration Registers in PYXIS to obtain the size. + */ +static unsigned long __init +ruffian_get_bank_size(unsigned long offset) +{ + unsigned long bank_addr, bank, ret = 0; + + /* Valid offsets are: 0x800, 0x840 and 0x880 + since Ruffian only uses three banks. */ + bank_addr = (unsigned long)PYXIS_MCR + offset; + bank = *(vulp)bank_addr; + + /* Check BANK_ENABLE */ + if (bank & 0x01) { + static unsigned long size[] __initdata = { + 0x40000000UL, /* 0x00, 1G */ + 0x20000000UL, /* 0x02, 512M */ + 0x10000000UL, /* 0x04, 256M */ + 0x08000000UL, /* 0x06, 128M */ + 0x04000000UL, /* 0x08, 64M */ + 0x02000000UL, /* 0x0a, 32M */ + 0x01000000UL, /* 0x0c, 16M */ + 0x00800000UL, /* 0x0e, 8M */ + 0x80000000UL, /* 0x10, 2G */ + }; + + bank = (bank & 0x1e) >> 1; + if (bank < ARRAY_SIZE(size)) + ret = size[bank]; + } + + return ret; +} +#endif /* BUILDING_FOR_MILO */ + +/* + * The System Vector + */ + +struct alpha_machine_vector ruffian_mv __initmv = { + .vector_name = "Ruffian", + DO_EV5_MMU, + DO_DEFAULT_RTC, + DO_PYXIS_IO, + .machine_check = cia_machine_check, + .max_isa_dma_address = ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = DEFAULT_MEM_BASE, + .pci_dac_offset = PYXIS_DAC_OFFSET, + + .nr_irqs = 48, + .device_interrupt = pyxis_device_interrupt, + + .init_arch = pyxis_init_arch, + .init_irq = ruffian_init_irq, + .init_rtc = ruffian_init_rtc, + .init_pci = cia_init_pci, + .kill_arch = ruffian_kill_arch, + .pci_map_irq = ruffian_map_irq, + .pci_swizzle = ruffian_swizzle, +}; +ALIAS_MV(ruffian) -- cgit v1.2.3