From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/alpha/lib/memchr.S | 165 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 165 insertions(+) create mode 100644 arch/alpha/lib/memchr.S (limited to 'arch/alpha/lib/memchr.S') diff --git a/arch/alpha/lib/memchr.S b/arch/alpha/lib/memchr.S new file mode 100644 index 000000000..c13d3eca2 --- /dev/null +++ b/arch/alpha/lib/memchr.S @@ -0,0 +1,165 @@ +/* Copyright (C) 1996 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by David Mosberger (davidm@cs.arizona.edu). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If not, + write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +/* Finds characters in a memory area. Optimized for the Alpha: + + - memory accessed as aligned quadwords only + - uses cmpbge to compare 8 bytes in parallel + - does binary search to find 0 byte in last + quadword (HAKMEM needed 12 instructions to + do this instead of the 9 instructions that + binary search needs). + +For correctness consider that: + + - only minimum number of quadwords may be accessed + - the third argument is an unsigned long +*/ +#include + .set noreorder + .set noat + + .globl memchr + .ent memchr +memchr: + .frame $30,0,$26,0 + .prologue 0 + + # Hack -- if someone passes in (size_t)-1, hoping to just + # search til the end of the address space, we will overflow + # below when we find the address of the last byte. Given + # that we will never have a 56-bit address space, cropping + # the length is the easiest way to avoid trouble. + zap $18, 0x80, $5 #-e0 : + + beq $18, $not_found # .. e1 : + ldq_u $1, 0($16) # e1 : load first quadword + insbl $17, 1, $2 # .. e0 : $2 = 000000000000ch00 + and $17, 0xff, $17 #-e0 : $17 = 00000000000000ch + cmpult $18, 9, $4 # .. e1 : + or $2, $17, $17 # e0 : $17 = 000000000000chch + lda $3, -1($31) # .. e1 : + sll $17, 16, $2 #-e0 : $2 = 00000000chch0000 + addq $16, $5, $5 # .. e1 : + or $2, $17, $17 # e1 : $17 = 00000000chchchch + unop # : + sll $17, 32, $2 #-e0 : $2 = chchchch00000000 + or $2, $17, $17 # e1 : $17 = chchchchchchchch + extql $1, $16, $7 # e0 : + beq $4, $first_quad # .. e1 : + + ldq_u $6, -1($5) #-e1 : eight or less bytes to search + extqh $6, $16, $6 # .. e0 : + mov $16, $0 # e0 : + or $7, $6, $1 # .. e1 : $1 = quadword starting at $16 + + # Deal with the case where at most 8 bytes remain to be searched + # in $1. E.g.: + # $18 = 6 + # $1 = ????c6c5c4c3c2c1 +$last_quad: + negq $18, $6 #-e0 : + xor $17, $1, $1 # .. e1 : + srl $3, $6, $6 # e0 : $6 = mask of $18 bits set + cmpbge $31, $1, $2 # .. e1 : + and $2, $6, $2 #-e0 : + beq $2, $not_found # .. e1 : + +$found_it: + # Now, determine which byte matched: + negq $2, $3 # e0 : + and $2, $3, $2 # e1 : + + and $2, 0x0f, $1 #-e0 : + addq $0, 4, $3 # .. e1 : + cmoveq $1, $3, $0 # e0 : + + addq $0, 2, $3 # .. e1 : + and $2, 0x33, $1 #-e0 : + cmoveq $1, $3, $0 # .. e1 : + + and $2, 0x55, $1 # e0 : + addq $0, 1, $3 # .. e1 : + cmoveq $1, $3, $0 #-e0 : + +$done: ret # .. e1 : + + # Deal with the case where $18 > 8 bytes remain to be + # searched. $16 may not be aligned. + .align 4 +$first_quad: + andnot $16, 0x7, $0 #-e1 : + insqh $3, $16, $2 # .. e0 : $2 = 0000ffffffffffff ($16<0:2> ff) + xor $1, $17, $1 # e0 : + or $1, $2, $1 # e1 : $1 = ====ffffffffffff + cmpbge $31, $1, $2 #-e0 : + bne $2, $found_it # .. e1 : + + # At least one byte left to process. + + ldq $1, 8($0) # e0 : + subq $5, 1, $18 # .. e1 : + addq $0, 8, $0 #-e0 : + + # Make $18 point to last quad to be accessed (the + # last quad may or may not be partial). + + andnot $18, 0x7, $18 # .. e1 : + cmpult $0, $18, $2 # e0 : + beq $2, $final # .. e1 : + + # At least two quads remain to be accessed. + + subq $18, $0, $4 #-e0 : $4 <- nr quads to be processed + and $4, 8, $4 # e1 : odd number of quads? + bne $4, $odd_quad_count # e1 : + + # At least three quads remain to be accessed + + mov $1, $4 # e0 : move prefetched value to correct reg + + .align 4 +$unrolled_loop: + ldq $1, 8($0) #-e0 : prefetch $1 + xor $17, $4, $2 # .. e1 : + cmpbge $31, $2, $2 # e0 : + bne $2, $found_it # .. e1 : + + addq $0, 8, $0 #-e0 : +$odd_quad_count: + xor $17, $1, $2 # .. e1 : + ldq $4, 8($0) # e0 : prefetch $4 + cmpbge $31, $2, $2 # .. e1 : + addq $0, 8, $6 #-e0 : + bne $2, $found_it # .. e1 : + + cmpult $6, $18, $6 # e0 : + addq $0, 8, $0 # .. e1 : + bne $6, $unrolled_loop #-e1 : + + mov $4, $1 # e0 : move prefetched value into $1 +$final: subq $5, $0, $18 # .. e1 : $18 <- number of bytes left to do + bne $18, $last_quad # e1 : + +$not_found: + mov $31, $0 #-e0 : + ret # .. e1 : + + .end memchr + EXPORT_SYMBOL(memchr) -- cgit v1.2.3