From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arc/plat-hsdk/platform.c | 326 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 326 insertions(+) create mode 100644 arch/arc/plat-hsdk/platform.c (limited to 'arch/arc/plat-hsdk/platform.c') diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c new file mode 100644 index 000000000..c4a875b22 --- /dev/null +++ b/arch/arc/plat-hsdk/platform.c @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ARC HSDK Platform support code + * + * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) + */ + +#include +#include +#include +#include +#include +#include +#include + +int arc_hsdk_axi_dmac_coherent __section(".data") = 0; + +#define ARC_CCM_UNUSED_ADDR 0x60000000 + + +#define ARC_PERIPHERAL_BASE 0xf0000000 +#define CREG_BASE (ARC_PERIPHERAL_BASE + 0x1000) + +#define SDIO_BASE (ARC_PERIPHERAL_BASE + 0xA000) +#define SDIO_UHS_REG_EXT (SDIO_BASE + 0x108) +#define SDIO_UHS_REG_EXT_DIV_2 (2 << 30) + +#define HSDK_GPIO_INTC (ARC_PERIPHERAL_BASE + 0x3000) + +static void __init hsdk_enable_gpio_intc_wire(void) +{ + /* + * Peripherals on CPU Card are wired to cpu intc via intermediate + * DW APB GPIO blocks (mainly for debouncing) + * + * --------------------- + * | snps,archs-intc | + * --------------------- + * | + * ---------------------- + * | snps,archs-idu-intc | + * ---------------------- + * | | | | | + * | [eth] [USB] [... other peripherals] + * | + * ------------------- + * | snps,dw-apb-intc | + * ------------------- + * | | | | + * [Bt] [HAPS] [... other peripherals] + * + * Current implementation of "irq-dw-apb-ictl" driver doesn't work well + * with stacked INTCs. In particular problem happens if its master INTC + * not yet instantiated. See discussion here - + * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com + * + * So setup the first gpio block as a passive pass thru and hide it from + * DT hardware topology - connect intc directly to cpu intc + * The GPIO "wire" needs to be init nevertheless (here) + * + * One side adv is that peripheral interrupt handling avoids one nested + * intc ISR hop + * + * According to HSDK User's Manual [1], "Table 2 Interrupt Mapping" + * we have the following GPIO input lines used as sources of interrupt: + * - GPIO[0] - Bluetooth interrupt of RS9113 module + * - GPIO[2] - HAPS interrupt (on HapsTrak 3 connector) + * - GPIO[3] - Audio codec (MAX9880A) interrupt + * - GPIO[8-23] - Available on Arduino and PMOD_x headers + * For now there's no use of Arduino and PMOD_x headers in Linux + * use-case so we only enable lines 0, 2 and 3. + * + * [1] https://github.com/foss-for-synopsys-dwc-arc-processors/ARC-Development-Systems-Forum/wiki/docs/ARC_HSDK_User_Guide.pdf + */ +#define GPIO_INTEN (HSDK_GPIO_INTC + 0x30) +#define GPIO_INTMASK (HSDK_GPIO_INTC + 0x34) +#define GPIO_INTTYPE_LEVEL (HSDK_GPIO_INTC + 0x38) +#define GPIO_INT_POLARITY (HSDK_GPIO_INTC + 0x3c) +#define GPIO_INT_CONNECTED_MASK 0x0d + + iowrite32(0xffffffff, (void __iomem *) GPIO_INTMASK); + iowrite32(~GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTMASK); + iowrite32(0x00000000, (void __iomem *) GPIO_INTTYPE_LEVEL); + iowrite32(0xffffffff, (void __iomem *) GPIO_INT_POLARITY); + iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN); +} + +static int __init hsdk_tweak_node_coherency(const char *path, bool coherent) +{ + void *fdt = initial_boot_params; + const void *prop; + int node, ret; + bool dt_coh_set; + + node = fdt_path_offset(fdt, path); + if (node < 0) + goto tweak_fail; + + prop = fdt_getprop(fdt, node, "dma-coherent", &ret); + if (!prop && ret != -FDT_ERR_NOTFOUND) + goto tweak_fail; + + dt_coh_set = ret != -FDT_ERR_NOTFOUND; + ret = 0; + + /* need to remove "dma-coherent" property */ + if (dt_coh_set && !coherent) + ret = fdt_delprop(fdt, node, "dma-coherent"); + + /* need to set "dma-coherent" property */ + if (!dt_coh_set && coherent) + ret = fdt_setprop(fdt, node, "dma-coherent", NULL, 0); + + if (ret < 0) + goto tweak_fail; + + return 0; + +tweak_fail: + pr_err("failed to tweak %s to %scoherent\n", path, coherent ? "" : "non"); + return -EFAULT; +} + +enum hsdk_axi_masters { + M_HS_CORE = 0, + M_HS_RTT, + M_AXI_TUN, + M_HDMI_VIDEO, + M_HDMI_AUDIO, + M_USB_HOST, + M_ETHERNET, + M_SDIO, + M_GPU, + M_DMAC_0, + M_DMAC_1, + M_DVFS +}; + +#define UPDATE_VAL 1 + +/* + * This is modified configuration of AXI bridge. Default settings + * are specified in "Table 111 CREG Address Decoder register reset values". + * + * AXI_M_m_SLV{0|1} - Slave Select register for master 'm'. + * Possible slaves are: + * - 0 => no slave selected + * - 1 => DDR controller port #1 + * - 2 => SRAM controller + * - 3 => AXI tunnel + * - 4 => EBI controller + * - 5 => ROM controller + * - 6 => AXI2APB bridge + * - 7 => DDR controller port #2 + * - 8 => DDR controller port #3 + * - 9 => HS38x4 IOC + * - 10 => HS38x4 DMI + * AXI_M_m_OFFSET{0|1} - Addr Offset register for master 'm' + * + * Please read ARC HS Development IC Specification, section 17.2 for more + * information about apertures configuration. + * + * m master AXI_M_m_SLV0 AXI_M_m_SLV1 AXI_M_m_OFFSET0 AXI_M_m_OFFSET1 + * 0 HS (CBU) 0x11111111 0x63111111 0xFEDCBA98 0x0E543210 + * 1 HS (RTT) 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 2 AXI Tunnel 0x88888888 0x88888888 0xFEDCBA98 0x76543210 + * 3 HDMI-VIDEO 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 4 HDMI-ADUIO 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 5 USB-HOST 0x77777777 0x77999999 0xFEDCBA98 0x76DCBA98 + * 6 ETHERNET 0x77777777 0x77999999 0xFEDCBA98 0x76DCBA98 + * 7 SDIO 0x77777777 0x77999999 0xFEDCBA98 0x76DCBA98 + * 8 GPU 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 9 DMAC (port #1) 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 10 DMAC (port #2) 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 11 DVFS 0x00000000 0x60000000 0x00000000 0x00000000 + */ + +#define CREG_AXI_M_SLV0(m) ((void __iomem *)(CREG_BASE + 0x20 * (m))) +#define CREG_AXI_M_SLV1(m) ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x04)) +#define CREG_AXI_M_OFT0(m) ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x08)) +#define CREG_AXI_M_OFT1(m) ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x0C)) +#define CREG_AXI_M_UPDT(m) ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x14)) + +#define CREG_AXI_M_HS_CORE_BOOT ((void __iomem *)(CREG_BASE + 0x010)) + +#define CREG_PAE ((void __iomem *)(CREG_BASE + 0x180)) +#define CREG_PAE_UPDT ((void __iomem *)(CREG_BASE + 0x194)) + +static void __init hsdk_init_memory_bridge_axi_dmac(void) +{ + bool coherent = !!arc_hsdk_axi_dmac_coherent; + u32 axi_m_slv1, axi_m_oft1; + + /* + * Don't tweak memory bridge configuration if we failed to tweak DTB + * as we will end up in a inconsistent state. + */ + if (hsdk_tweak_node_coherency("/soc/dmac@80000", coherent)) + return; + + if (coherent) { + axi_m_slv1 = 0x77999999; + axi_m_oft1 = 0x76DCBA98; + } else { + axi_m_slv1 = 0x77777777; + axi_m_oft1 = 0x76543210; + } + + writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_0)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_0)); + writel(axi_m_slv1, CREG_AXI_M_SLV1(M_DMAC_0)); + writel(axi_m_oft1, CREG_AXI_M_OFT1(M_DMAC_0)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_0)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_1)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_1)); + writel(axi_m_slv1, CREG_AXI_M_SLV1(M_DMAC_1)); + writel(axi_m_oft1, CREG_AXI_M_OFT1(M_DMAC_1)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_1)); +} + +static void __init hsdk_init_memory_bridge(void) +{ + u32 reg; + + /* + * M_HS_CORE has one unique register - BOOT. + * We need to clean boot mirror (BOOT[1:0]) bits in them to avoid first + * aperture to be masked by 'boot mirror'. + */ + reg = readl(CREG_AXI_M_HS_CORE_BOOT) & (~0x3); + writel(reg, CREG_AXI_M_HS_CORE_BOOT); + writel(0x11111111, CREG_AXI_M_SLV0(M_HS_CORE)); + writel(0x63111111, CREG_AXI_M_SLV1(M_HS_CORE)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HS_CORE)); + writel(0x0E543210, CREG_AXI_M_OFT1(M_HS_CORE)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HS_CORE)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_HS_RTT)); + writel(0x77777777, CREG_AXI_M_SLV1(M_HS_RTT)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HS_RTT)); + writel(0x76543210, CREG_AXI_M_OFT1(M_HS_RTT)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HS_RTT)); + + writel(0x88888888, CREG_AXI_M_SLV0(M_AXI_TUN)); + writel(0x88888888, CREG_AXI_M_SLV1(M_AXI_TUN)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_AXI_TUN)); + writel(0x76543210, CREG_AXI_M_OFT1(M_AXI_TUN)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_AXI_TUN)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_HDMI_VIDEO)); + writel(0x77777777, CREG_AXI_M_SLV1(M_HDMI_VIDEO)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HDMI_VIDEO)); + writel(0x76543210, CREG_AXI_M_OFT1(M_HDMI_VIDEO)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HDMI_VIDEO)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_HDMI_AUDIO)); + writel(0x77777777, CREG_AXI_M_SLV1(M_HDMI_AUDIO)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HDMI_AUDIO)); + writel(0x76543210, CREG_AXI_M_OFT1(M_HDMI_AUDIO)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HDMI_AUDIO)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_USB_HOST)); + writel(0x77999999, CREG_AXI_M_SLV1(M_USB_HOST)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_USB_HOST)); + writel(0x76DCBA98, CREG_AXI_M_OFT1(M_USB_HOST)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_USB_HOST)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_ETHERNET)); + writel(0x77999999, CREG_AXI_M_SLV1(M_ETHERNET)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_ETHERNET)); + writel(0x76DCBA98, CREG_AXI_M_OFT1(M_ETHERNET)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_ETHERNET)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_SDIO)); + writel(0x77999999, CREG_AXI_M_SLV1(M_SDIO)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_SDIO)); + writel(0x76DCBA98, CREG_AXI_M_OFT1(M_SDIO)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_SDIO)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_GPU)); + writel(0x77777777, CREG_AXI_M_SLV1(M_GPU)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_GPU)); + writel(0x76543210, CREG_AXI_M_OFT1(M_GPU)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_GPU)); + + writel(0x00000000, CREG_AXI_M_SLV0(M_DVFS)); + writel(0x60000000, CREG_AXI_M_SLV1(M_DVFS)); + writel(0x00000000, CREG_AXI_M_OFT0(M_DVFS)); + writel(0x00000000, CREG_AXI_M_OFT1(M_DVFS)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DVFS)); + + hsdk_init_memory_bridge_axi_dmac(); + + /* + * PAE remapping for DMA clients does not work due to an RTL bug, so + * CREG_PAE register must be programmed to all zeroes, otherwise it + * will cause problems with DMA to/from peripherals even if PAE40 is + * not used. + */ + writel(0x00000000, CREG_PAE); + writel(UPDATE_VAL, CREG_PAE_UPDT); +} + +static void __init hsdk_init_early(void) +{ + hsdk_init_memory_bridge(); + + /* + * Switch SDIO external ciu clock divider from default div-by-8 to + * minimum possible div-by-2. + */ + iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT); + + hsdk_enable_gpio_intc_wire(); +} + +static const char *hsdk_compat[] __initconst = { + "snps,hsdk", + NULL, +}; + +MACHINE_START(SIMULATION, "hsdk") + .dt_compat = hsdk_compat, + .init_early = hsdk_init_early, +MACHINE_END -- cgit v1.2.3