From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts | 940 +++++++++++++++++++++++ 1 file changed, 940 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts (limited to 'arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts') diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts new file mode 100644 index 000000000..f75cad41a --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts @@ -0,0 +1,940 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (C) 2020 Bytedance. +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include +#include +#include + +/ { + model = "Bytedance G220A BMC"; + compatible = "bytedance,g220a-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + i2c14 = &channel_3_0; + i2c15 = &channel_3_1; + i2c16 = &channel_3_2; + i2c17 = &channel_3_3; + i2c18 = &channel_6_0; + i2c19 = &channel_6_1; + i2c20 = &channel_6_2; + i2c21 = &channel_6_3; + i2c22 = &channel_6_4; + i2c23 = &channel_6_5; + i2c24 = &channel_6_6; + i2c25 = &channel_6_7; + i2c26 = &channel_6_8; + i2c27 = &channel_6_9; + i2c28 = &channel_6_10; + i2c29 = &channel_6_11; + i2c30 = &channel_6_12; + i2c31 = &channel_6_13; + i2c32 = &channel_6_14; + i2c33 = &channel_6_15; + i2c34 = &channel_6_16; + i2c35 = &channel_6_17; + i2c36 = &channel_6_18; + i2c37 = &channel_6_19; + i2c38 = &channel_6_20; + i2c39 = &channel_6_21; + i2c40 = &channel_6_22; + i2c41 = &channel_6_23; + i2c42 = &channel_6_24; + i2c43 = &channel_6_25; + i2c44 = &channel_10_0; + i2c45 = &channel_10_1; + i2c46 = &channel_10_2; + i2c47 = &channel_10_3; + i2c48 = &channel_10_4; + i2c49 = &channel_10_5; + i2c50 = &channel_10_6; + i2c51 = &channel_10_7; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlycon"; + }; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@bc000000 { + no-map; + reg = <0xbc000000 0x04000000>; /* 64M */ + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; + + leds { + compatible = "gpio-leds"; + bmc_alive { + label = "bmc_alive"; + gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + led-pattern = <1000 1000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + event-burn-in-signal { + label = "burn-in"; + gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-rear-riser1-presence { + label = "rear-riser1-presence"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + linux,code = <1>; + }; + + event-alrt-pvddq-cpu0 { + label = "alrt-pvddq-cpu0"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <2>; + }; + + event-rear-riser0-presence { + label = "rear-riser0-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <3>; + }; + + event-fault-pvddq-cpu0 { + label = "fault-pvddq-cpu0"; + gpios = <&pca0 10 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + event-alrt-pvddq-cpu1 { + label = "alrt-pvddq-cpu1"; + gpios = <&pca0 11 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + event-fault-pvddq-cpu1 { + label = "alrt-pvddq-cpu1"; + gpios = <&pca0 12 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + event-fault-pvccin-cpu1 { + label = "fault-pvccin-cpuq"; + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + event-bmc-rom0-wp { + label = "bmc-rom0-wp"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + event-bmc-rom1-wp { + label = "bmc-rom1-wp"; + gpios = <&pca1 1 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + + event-fan0-presence { + label = "fan0-presence"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + linux,code = <10>; + }; + + event-fan1-presence { + label = "fan1-presence"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + linux,code = <11>; + }; + + event-fan2-presence { + label = "fan2-presence"; + gpios = <&pca1 4 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + event-fan3-presence { + label = "fan3-presence"; + gpios = <&pca1 5 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + event-fan4-presence { + label = "fan4-presence"; + gpios = <&pca1 6 GPIO_ACTIVE_LOW>; + linux,code = <14>; + }; + + event-fan5-presence { + label = "fan5-presence"; + gpios = <&pca1 7 GPIO_ACTIVE_LOW>; + linux,code = <15>; + }; + + event-front-bp1-presence { + label = "front-bp1-presence"; + gpios = <&pca1 8 GPIO_ACTIVE_LOW>; + linux,code = <16>; + }; + + event-rear-bp-presence { + label = "rear-bp-presence"; + gpios = <&pca1 9 GPIO_ACTIVE_LOW>; + linux,code = <17>; + }; + + event-fault-pvccin-cpu0 { + label = "fault-pvccin-cpu0"; + gpios = <&pca1 10 GPIO_ACTIVE_LOW>; + linux,code = <18>; + }; + + event-alrt-p1v05-pvcc { + label = "alrt-p1v05-pvcc1"; + gpios = <&pca1 11 GPIO_ACTIVE_LOW>; + linux,code = <19>; + }; + + event-fault-p1v05-pvccio { + label = "alrt-p1v05-pvcc1"; + gpios = <&pca1 12 GPIO_ACTIVE_LOW>; + linux,code = <20>; + }; + + event-alrt-p1v8-pvccio { + label = "alrt-p1v8-pvccio"; + gpios = <&pca1 13 GPIO_ACTIVE_LOW>; + linux,code = <21>; + }; + + event-fault-p1v8-pvccio { + label = "fault-p1v8-pvccio"; + gpios = <&pca1 14 GPIO_ACTIVE_LOW>; + linux,code = <22>; + }; + + event-front-bp0-presence { + label = "front-bp0-presence"; + gpios = <&pca1 15 GPIO_ACTIVE_LOW>; + linux,code = <23>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; + flash@1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bios"; + spi-max-frequency = <100000000>; + }; +}; + +&adc { + status = "okay"; +}; + +&wdt2 { + status = "okay"; + aspeed,alt-boot; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0", + "","","","", + /*B0-B7*/ "BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N", + "","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3", + "FM_PROJECT_ID4","FM_PROJECT_ID5","","", + /*F0-F7*/ "PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N", + "BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY", + "PCH_GLB_RST_N", + /*G0-G7*/ "P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N", + "P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT", + "NMI_BUTTON", + /*H0-H7*/ "BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK", + "BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0", + "PCA9546_U70_RST_N","IRQ_SML0_ALERT_N", + /*I0-I7*/ "FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N", + "","","","","", + /*J0-J7*/ "FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N", + "","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N", + "","IRQ_SML1_PMBUS_ALERT_N","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION", + /*R0-R7*/ "","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N", + "ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","", + /*S0-S7*/ "BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N", + "FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N", + "","","","", + /*Z0-Z7*/ "XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL", + "PCH_BMC_SMI_ACTIVE_R_N","","","","", + /*AA0-AA7*/ "PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R", + "FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT", + /*AB0-AB7*/ "","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","", + /*AC0-AC7*/ "","","","","","","","CPLD_PLTRST_B_N"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xCA2>; + status = "okay"; +}; + +&kcs4 { + aspeed,lpc-io-reg = <0xCA4>; + status = "okay"; +}; + +&lpc_snoop { + snoop-ports = <0x80>; + status = "okay"; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default + &pinctrl_nrts2_default + &pinctrl_ndtr2_default + &pinctrl_ndsr2_default + &pinctrl_ncts2_default + &pinctrl_ndcd2_default + &pinctrl_nri2_default>; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + channel_3_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_3_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_3_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_3_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c4 { + status = "okay"; + ipmb0@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + i2c-switch@72 { + compatible = "nxp,pca9548"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_6_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + channel_6_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + channel_6_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + channel_6_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + channel_6_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_8: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_12: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + }; + + channel_6_13: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_14: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_15: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + channel_6_9: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + }; + + channel_6_17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + channel_6_10: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_20: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_6_21: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_6_22: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_6_23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + channel_6_11: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_6_24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_6_25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + pca0:pca9555@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + gpio@1 { + reg = <1>; + type = ; + }; + + gpio@8 { + reg = <8>; + type = ; + }; + + gpio@9 { + reg = <9>; + type = ; + }; + + gpio@10 { + reg = <10>; + type = ; + }; + + gpio@11 { + reg = <11>; + type = ; + }; + + gpio@12 { + reg = <12>; + type = ; + }; + + gpio@13 { + reg = <13>; + type = ; + }; + }; + + pca1:pca9555@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = ; + }; + + gpio@1 { + reg = <1>; + type = ; + }; + + gpio@2 { + reg = <2>; + type = ; + }; + + gpio@3 { + reg = <3>; + type = ; + }; + + gpio@4 { + reg = <4>; + type = ; + }; + + gpio@5 { + reg = <5>; + type = ; + }; + + gpio@6 { + reg = <6>; + type = ; + }; + + gpio@7 { + reg = <7>; + type = ; + }; + gpio@8 { + reg = <8>; + type = ; + }; + + gpio@9 { + reg = <9>; + type = ; + }; + + gpio@10 { + reg = <10>; + type = ; + }; + + gpio@11 { + reg = <11>; + type = ; + }; + + gpio@12 { + reg = <12>; + type = ; + }; + + gpio@13 { + reg = <13>; + type = ; + }; + + gpio@14 { + reg = <14>; + type = ; + }; + + gpio@15 { + reg = <15>; + type = ; + }; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + channel_10_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_10_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_10_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_10_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + channel_10_4: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + channel_10_5: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + channel_10_6: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + channel_10_7: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; + }; + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; + }; + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>; + }; + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>; + }; +}; + +&gpio { + pin_gpio_i3 { + gpio-hog; + gpios = ; + output-low; + line-name = "NCSI_BMC_R_SEL"; + }; + + pin_gpio_b6 { + gpio-hog; + gpios = ; + output-low; + line-name = "EN_NCSI_SWITCH_N"; + }; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&vhub { + status = "okay"; +}; -- cgit v1.2.3