From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts | 418 +++++++++++++++++++++++++ 1 file changed, 418 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts (limited to 'arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts') diff --git a/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts new file mode 100644 index 000000000..6600f7e9b --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g4.dtsi" +#include + +#define EFUSE_OUTPUT(n) \ + efuse##n { \ + compatible = "regulator-output"; \ + vout-supply = <&efuse##n>; \ + } + +#define __stringify(x) #x + +#define EFUSE(hexaddr, num) \ + efuse@##hexaddr { \ + compatible = "lm25066"; \ + reg = <0x##hexaddr>; \ + shunt-resistor-micro-ohms = <675>; \ + regulators { \ + efuse##num: vout0 { \ + regulator-name = __stringify(efuse##num##-reg); \ + }; \ + }; \ + } + +/{ + model = "Delta Power AHE-50DC"; + compatible = "delta,ahe50dc-bmc", "aspeed,ast2400"; + + aliases { + serial4 = &uart5; + + /* + * pca9541-arbitrated logical i2c buses are numbered as the + * corresponding physical bus plus 20 + */ + i2c20 = &i2carb0; + i2c21 = &i2carb1; + i2c22 = &i2carb2; + i2c23 = &i2carb3; + i2c24 = &i2carb4; + i2c26 = &i2carb6; + i2c27 = &i2carb7; + i2c28 = &i2carb8; + i2c32 = &i2carb12; + }; + + chosen { + stdout-path = &uart3; + bootargs = "console=ttyS2,115200n8 earlycon"; + }; + + memory@40000000 { + reg = <0x40000000 0x10000000>; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + panic { + gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + linux,default-trigger = "panic"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>; + }; + + EFUSE_OUTPUT(01); + EFUSE_OUTPUT(02); + EFUSE_OUTPUT(03); + EFUSE_OUTPUT(04); + EFUSE_OUTPUT(05); + EFUSE_OUTPUT(06); + EFUSE_OUTPUT(07); + EFUSE_OUTPUT(08); + EFUSE_OUTPUT(09); + EFUSE_OUTPUT(10); + EFUSE_OUTPUT(11); + EFUSE_OUTPUT(12); + EFUSE_OUTPUT(13); + EFUSE_OUTPUT(14); + EFUSE_OUTPUT(15); + EFUSE_OUTPUT(16); + EFUSE_OUTPUT(17); + EFUSE_OUTPUT(18); + EFUSE_OUTPUT(19); + EFUSE_OUTPUT(20); + EFUSE_OUTPUT(21); + EFUSE_OUTPUT(22); + EFUSE_OUTPUT(23); + EFUSE_OUTPUT(24); + EFUSE_OUTPUT(25); + EFUSE_OUTPUT(26); + EFUSE_OUTPUT(27); + EFUSE_OUTPUT(28); + EFUSE_OUTPUT(29); + EFUSE_OUTPUT(30); + EFUSE_OUTPUT(31); + EFUSE_OUTPUT(32); + EFUSE_OUTPUT(33); + EFUSE_OUTPUT(34); + EFUSE_OUTPUT(35); + EFUSE_OUTPUT(36); + EFUSE_OUTPUT(37); + EFUSE_OUTPUT(38); + EFUSE_OUTPUT(39); + EFUSE_OUTPUT(40); + EFUSE_OUTPUT(41); + EFUSE_OUTPUT(42); + EFUSE_OUTPUT(43); + EFUSE_OUTPUT(44); + EFUSE_OUTPUT(45); + EFUSE_OUTPUT(46); + EFUSE_OUTPUT(47); + EFUSE_OUTPUT(48); + EFUSE_OUTPUT(49); + EFUSE_OUTPUT(50); + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "flash0"; + spi-max-frequency = <50000000>; // 50 MHz +#include "openbmc-flash-layout.dtsi" + }; +}; + +&uart3 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@79 { + compatible = "nxp,pca9541"; + reg = <0x79>; + + i2carb0: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + /* lm25066 efuses @ 10-17, 40-47, 50-57 */ + EFUSE(10, 03); + EFUSE(11, 04); + EFUSE(12, 01); + EFUSE(13, 02); + EFUSE(14, 13); + EFUSE(15, 14); + EFUSE(16, 15); + EFUSE(17, 16); + EFUSE(40, 12); + EFUSE(41, 11); + EFUSE(42, 10); + EFUSE(43, 09); + EFUSE(44, 08); + EFUSE(45, 07); + EFUSE(46, 05); + EFUSE(47, 06); + EFUSE(50, 17); + EFUSE(51, 18); + EFUSE(52, 20); + EFUSE(53, 19); + EFUSE(54, 22); + EFUSE(55, 21); + EFUSE(56, 24); + EFUSE(57, 23); + }; + }; +}; + +&i2c1 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@72 { + compatible = "nxp,pca9541"; + reg = <0x72>; + + i2carb1: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c2 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@73 { + compatible = "nxp,pca9541"; + reg = <0x73>; + + i2carb2: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c3 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@74 { + compatible = "nxp,pca9541"; + reg = <0x74>; + + i2carb3: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c4 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@7a { + compatible = "nxp,pca9541"; + reg = <0x7a>; + + i2carb4: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9534"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */ + EFUSE(10, 27); + EFUSE(11, 28); + EFUSE(12, 25); + EFUSE(13, 26); + EFUSE(14, 37); + EFUSE(15, 38); + EFUSE(16, 39); + EFUSE(17, 40); + EFUSE(40, 36); + EFUSE(41, 35); + EFUSE(42, 34); + EFUSE(43, 33); + EFUSE(44, 32); + EFUSE(45, 31); + EFUSE(46, 29); + EFUSE(47, 30); + EFUSE(50, 41); + EFUSE(51, 42); + EFUSE(52, 44); + EFUSE(53, 43); + EFUSE(54, 46); + EFUSE(55, 45); + EFUSE(56, 48); + EFUSE(57, 47); + EFUSE(59, 49); + EFUSE(5a, 50); + }; + }; +}; + +&i2c6 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@75 { + compatible = "nxp,pca9541"; + reg = <0x75>; + + i2carb6: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c7 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@76 { + compatible = "nxp,pca9541"; + reg = <0x76>; + + i2carb7: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c8 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@7c { + compatible = "nxp,pca9541"; + reg = <0x7c>; + + i2carb8: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + + fancontrol@30 { + compatible = "delta,ahe50dc-fan"; + reg = <0x30>; + }; + + /* Baseboard FRU eeprom */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + }; +}; + +&i2c12 { + status = "okay"; + bus-frequency = <200000>; + + pca9541@71 { + compatible = "nxp,pca9541"; + reg = <0x71>; + + i2carb12: i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /* A */ "", "", "", "", "", "", "", "", + /* B */ "", "", "", "", "", "", "", "", + /* C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "", + /* D */ "", "", "", "", "", "", "", "", + /* E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "", + /* F */ "", "", "", "", "", "", "", "", + /* G */ "", "", "", "", "", "", "", "", + /* H */ "", "", "", "", "", "", "", "", + /* I */ "", "", "", "", "", "", "", "", + /* J */ "", "", "BMC_ID", "", "", "", "", "", + /* K */ "", "", "", "", "", "", "", "", + /* L */ "", "", "", "", "", "", "", "", + /* M */ "", "", "", "", "", "", "", "", + /* N */ "", "", "", "", "", "", "", "", + /* O */ "", "", "", "", "", "", "", "", + /* P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "", + /* Q */ "", "", "", "", "", "", "", "", + /* R */ "", "", "", "", "", "", "", "", + /* S */ "", "", "", "", "", "", "", "", + /* T */ "", "", "", "", "", "", "", "", + /* U */ "", "", "", "", "", "", "", "", + /* V */ "", "", "", "", "", "", "", "", + /* W */ "", "", "", "", "", "", "", "", + /* X */ "", "", "", "", "", "", "", "", + /* Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "", + /* Z */ "", "", "", "", "", "", "", "", + /* AA */ "", "", "", "", "", "", "", "", + /* AB */ "", "", "", ""; + + /* + * I don't rightly know what this GPIO really *is*, but setting it to + * zero causes the fans to run at full speed, after which setting it + * back to one causes a power output glitch, so install a hog to keep + * it at one as a failsafe to ensure nothing accidentally touches it. + */ + doom-guardrail { + gpio-hog; + gpios = ; + output-low; + }; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default>; +}; -- cgit v1.2.3