From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../arm/boot/dts/aspeed-bmc-facebook-bletchley.dts | 1077 ++++++++++++++++++++ 1 file changed, 1077 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts (limited to 'arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts') diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts new file mode 100644 index 000000000..e899de681 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts @@ -0,0 +1,1077 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2021 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include +#include +#include +#include +#include + +/ { + model = "Facebook Bletchley BMC"; + compatible = "facebook,bletchley-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + bootargs = "console=ttyS4,57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; + }; + + spi1_gpio: spi1-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + + tpmdev@0 { + compatible = "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; + + switchphy: ethernet-phy@0 { + // Fixed link + }; + + front_gpio_leds { + compatible = "gpio-leds"; + sys_log_id { + default-state = "off"; + gpios = <&front_leds 0 GPIO_ACTIVE_LOW>; + }; + }; + + fan_gpio_leds { + compatible = "gpio-leds"; + fan0_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>; + }; + fan1_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>; + }; + fan2_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>; + }; + fan3_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>; + }; + fan0_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>; + }; + fan1_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>; + }; + fan2_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>; + }; + fan3_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>; + }; + }; + + sled1_gpio_leds { + compatible = "gpio-leds"; + sled1_amber { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>; + }; + sled1_blue { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>; + }; + }; + + sled2_gpio_leds { + compatible = "gpio-leds"; + sled2_amber { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>; + }; + sled2_blue { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>; + }; + }; + + sled3_gpio_leds { + compatible = "gpio-leds"; + sled3_amber { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>; + }; + sled3_blue { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>; + }; + }; + + sled4_gpio_leds { + compatible = "gpio-leds"; + sled4_amber { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>; + }; + sled4_blue { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>; + }; + }; + + sled5_gpio_leds { + compatible = "gpio-leds"; + sled5_amber { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>; + }; + sled5_blue { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>; + }; + }; + + sled6_gpio_leds { + compatible = "gpio-leds"; + sled6_amber { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>; + }; + sled6_blue { + retain-state-shutdown; + default-state = "keep"; + gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + presence-sled1 { + label = "presence-sled1"; + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + presence-sled2 { + label = "presence-sled2"; + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + presence-sled3 { + label = "presence-sled3"; + gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + presence-sled4 { + label = "presence-sled4"; + gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + presence-sled5 { + label = "presence-sled5"; + gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + presence-sled6 { + label = "presence-sled6"; + gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + vbus_sled1: vbus_sled1 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vbus_sled2: vbus_sled2 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vbus_sled3: vbus_sled3 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vbus_sled4: vbus_sled4 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled4"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vbus_sled5: vbus_sled5 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vbus_sled6: vbus_sled6 { + compatible = "regulator-fixed"; + regulator-name = "vbus_sled6"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&mac2 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&switchphy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled1_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED1_SWD_MUX", "SLED1_XRES_SWD_N", + "SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN"; + }; + + sled1_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&gpio0>; + interrupts = ; + + gpio-line-names = + "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT", + "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT", + "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY", + "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1"; + }; + + sled1_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM", + "","","","", + "","","","", + "","","",""; + }; + + sled1_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + interrupt-parent = <&gpio0>; + interrupts = ; + vbus-supply = <&vbus_sled1>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; + }; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c1 { + status = "okay"; + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled2_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED2_SWD_MUX", "SLED2_XRES_SWD_N", + "SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN"; + }; + + sled2_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&gpio0>; + interrupts = ; + + gpio-line-names = + "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT", + "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT", + "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY", + "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2"; + }; + + sled2_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM", + "","","","", + "","","","", + "","","",""; + }; + + sled2_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + interrupt-parent = <&gpio0>; + interrupts = ; + vbus-supply = <&vbus_sled2>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; + }; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c2 { + status = "okay"; + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled3_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED3_SWD_MUX", "SLED3_XRES_SWD_N", + "SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN"; + }; + + sled3_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&gpio0>; + interrupts = ; + + gpio-line-names = + "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT", + "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT", + "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY", + "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3"; + }; + + sled3_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM", + "","","","", + "","","","", + "","","",""; + }; + + sled3_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + interrupt-parent = <&gpio0>; + interrupts = ; + vbus-supply = <&vbus_sled3>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; + }; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c3 { + status = "okay"; + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled4_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED4_SWD_MUX", "SLED4_XRES_SWD_N", + "SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN"; + }; + + sled4_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&gpio0>; + interrupts = ; + + gpio-line-names = + "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT", + "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT", + "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY", + "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4"; + }; + + sled4_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM", + "","","","", + "","","","", + "","","",""; + }; + + sled4_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + interrupt-parent = <&gpio0>; + interrupts = ; + vbus-supply = <&vbus_sled4>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; + }; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c4 { + status = "okay"; + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled5_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED5_SWD_MUX", "SLED5_XRES_SWD_N", + "SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN"; + }; + + sled5_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&gpio0>; + interrupts = ; + + gpio-line-names = + "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT", + "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT", + "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY", + "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5"; + }; + + sled5_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM", + "","","","", + "","","","", + "","","",""; + }; + + sled5_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + interrupt-parent = <&gpio0>; + interrupts = ; + vbus-supply = <&vbus_sled5>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; + }; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c5 { + status = "okay"; + ina230@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled6_ioexp41: pca9536@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED6_SWD_MUX", "SLED6_XRES_SWD_N", + "SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN"; + }; + + sled6_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&gpio0>; + interrupts = ; + + gpio-line-names = + "SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT", + "SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT", + "SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY", + "SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6"; + }; + + sled6_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM", + "","","","", + "","","","", + "","","",""; + }; + + sled6_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + interrupt-parent = <&gpio0>; + interrupts = ; + vbus-supply = <&vbus_sled6>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "host"; + pd-disable; + typec-power-opmode = "default"; + }; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c6 { + status = "okay"; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + + rtc@51 { + /* in-chip rtc disabled, use external rtc (battery-backed) */ + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c9 { + status = "okay"; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; +}; + +&i2c10 { + status = "okay"; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + front_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-fault-identify","power-p5v-stby-good", + "power-p1v0-dvdd-good","power-p1v0-avdd-good", + "","","","", + "","","","", + "","","",""; + }; +}; + +&i2c12 { + status = "okay"; + + adm1278@11 { + compatible = "adi,adm1278"; + reg = <0x11>; + shunt-resistor-micro-ohms = <300>; + adi,volt-curr-sample-average = <128>; + adi,power-sample-average = <128>; + }; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + tmp421@4d { + compatible = "ti,tmp421"; + reg = <0x4d>; + }; + + fan_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-fan0","presence-fan1", + "presence-fan2","presence-fan3", + "power-fan0-good","power-fan1-good", + "power-fan2-good","power-fan3-good", + "","","","", + "","","",""; + }; +}; + +&i2c13 { + multi-master; + aspeed,hw-timeout-ms = <1000>; + status = "okay"; + + //USB Debug Connector + ipmb13@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>; + + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N", + "SEL_SPI2_MUX","SPI2_MUX1", + "SPI2_MUX2","SPI2_MUX3", + "","FUSB302_SLED3_INT_N", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "BMC_SLED1_STCK","BMC_SLED2_STCK", + "BMC_SLED3_STCK","BMC_SLED4_STCK", + "BMC_SLED5_STCK","BMC_SLED6_STCK", + "","", + /*G0-G7*/ "BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL", + "PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","", + /*H0-H7*/ "presence-riser1","presence-riser2", + "presence-sled1","presence-sled2", + "presence-sled3","presence-sled4", + "presence-sled5","presence-sled6", + /*I0-I7*/ "REV_ID0","", + "REV_ID1","REV_ID2", + "","BSM_FLASH_WP_STATUS", + "BMC_TPM_PRES_N","FUSB302_SLED6_INT_N", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","BMC_RTC_INT","","", + /*M0-M7*/ "ALERT_SLED1_N","ALERT_SLED2_N", + "ALERT_SLED3_N","ALERT_SLED4_N", + "ALERT_SLED5_N","ALERT_SLED6_N", + "","USB_DEBUG_PWR_BTN_N", + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1", + "LED_POSTCODE_2","LED_POSTCODE_3", + "LED_POSTCODE_4","LED_POSTCODE_5", + "LED_POSTCODE_6","LED_POSTCODE_7", + /*O0-O7*/ "","","","", + "","BOARD_ID0","BOARD_ID1","BOARD_ID2", + /*P0-P7*/ "","","","","","","","BMC_HEARTBEAT", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","BAT_DETECT", + "BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "PWRGD_CNS_PSU","RST_BMC_MVL_N", + "P12V_AUX_ALERT1_N","PSU_PRSNT", + "USB2_SEL0_A","USB2_SEL1_A", + "USB2_SEL0_B","USB2_SEL1_B", + /*W0-W7*/ "RST_FRONT_IOEXP_N","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "BMC_SELF_HW_RST","BSM_PRSNT_N", + "BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N", + "","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&adc0 { + vref = <1800>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref = <2500>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&mdio0 { + status = "okay"; + /* TODO: Add Marvell 88E6191X */ +}; + +&mdio3 { + status = "okay"; + /* TODO: Add Marvell 88X3310 */ +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; +}; + +&pinctrl { + pinctrl_gpiov2_unbiased_default: gpiov2 { + pins = "AD14"; + bias-disable; + }; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; -- cgit v1.2.3