From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 2420 ++++++++++++++++++++++++++ 1 file changed, 2420 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts (limited to 'arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts new file mode 100644 index 000000000..e1b5d4430 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -0,0 +1,2420 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include +#include +#include + +/ { + model = "Rainier 2U"; + compatible = "ibm,rainier-bmc", "aspeed,ast2600"; + + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c115 = &cfam0_i2c15; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c214 = &cfam1_i2c14; + i2c215 = &cfam1_i2c15; + i2c216 = &cfam1_i2c16; + i2c217 = &cfam1_i2c17; + i2c300 = &cfam2_i2c0; + i2c301 = &cfam2_i2c1; + i2c310 = &cfam2_i2c10; + i2c311 = &cfam2_i2c11; + i2c312 = &cfam2_i2c12; + i2c313 = &cfam2_i2c13; + i2c314 = &cfam2_i2c14; + i2c315 = &cfam2_i2c15; + i2c402 = &cfam3_i2c2; + i2c403 = &cfam3_i2c3; + i2c410 = &cfam3_i2c10; + i2c411 = &cfam3_i2c11; + i2c414 = &cfam3_i2c14; + i2c415 = &cfam3_i2c15; + i2c416 = &cfam3_i2c16; + i2c417 = &cfam3_i2c17; + + serial4 = &uart5; + i2c16 = &i2c2mux0; + i2c17 = &i2c2mux1; + i2c18 = &i2c2mux2; + i2c19 = &i2c2mux3; + i2c20 = &i2c4mux0chn0; + i2c21 = &i2c4mux0chn1; + i2c22 = &i2c4mux0chn2; + i2c23 = &i2c5mux0chn0; + i2c24 = &i2c5mux0chn1; + i2c25 = &i2c6mux0chn0; + i2c26 = &i2c6mux0chn1; + i2c27 = &i2c6mux0chn2; + i2c28 = &i2c6mux0chn3; + i2c29 = &i2c11mux0chn0; + i2c30 = &i2c11mux0chn1; + + spi10 = &cfam0_spi0; + spi11 = &cfam0_spi1; + spi12 = &cfam0_spi2; + spi13 = &cfam0_spi3; + spi20 = &cfam1_spi0; + spi21 = &cfam1_spi1; + spi22 = &cfam1_spi2; + spi23 = &cfam1_spi3; + spi30 = &cfam2_spi0; + spi31 = &cfam2_spi1; + spi32 = &cfam2_spi2; + spi33 = &cfam2_spi3; + spi40 = &cfam3_spi0; + spi41 = &cfam3_spi1; + spi42 = &cfam3_spi2; + spi43 = &cfam3_spi3; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8 earlycon"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + no-map; + reg = <0xb4000000 0x04000000>; /* 64M */ + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; + + i2c2mux: i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + i2c-parent = <&i2c2>; + mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>, + <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; + idle-state = <0>; + + i2c2mux0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c2mux1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c2mux2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c2mux3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + leds { + compatible = "gpio-leds"; + + /* BMC Card fault LED at the back */ + bmc-ingraham0 { + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure ID LED at the back */ + rear-enc-id0 { + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure fault LED at the back */ + rear-enc-fault0 { + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + }; + + /* PCIE slot power LED */ + pcieslot-power { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + event-fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + event-fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + event-fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + + event-fan4-presence { + label = "fan4-presence"; + gpios = <&pca0 10 GPIO_ACTIVE_LOW>; + linux,code = <10>; + }; + + event-fan5-presence { + label = "fan5-presence"; + gpios = <&pca0 11 GPIO_ACTIVE_LOW>; + linux,code = <11>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; +}; + +&adc1 { + status = "okay"; + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","checkstop","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", + /*P0-P7*/ "","","","","pcieslot-power","","","", + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", + /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", + "power-ffs-sync-history","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; + + i2c3_mux_oe_n { + gpio-hog; + gpios = ; + output-high; + line-name = "I2C3_MUX_OE_N"; + }; + + usb_power { + gpio-hog; + gpios = ; + output-high; + }; +}; + +&emmc_controller { + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&emmc { + status = "okay"; + clk-phase-mmc-hs200 = <180>, <180>; +}; + +&fsim0 { + status = "okay"; + + #address-cells = <2>; + #size-cells = <0>; + + /* + * CFAM Reset is supposed to be active low but pass1 hardware is wired + * active high. + */ + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; /* OMI01 */ + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; /* OMI23 */ + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam0_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; /* OMI45 */ + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; /* OMI67 */ + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam1_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam1_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam1_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; + + cfam@2,0 { + reg = <2 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <2>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + }; + + cfam2_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + }; + + cfam2_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam2_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam2_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam2_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam2_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam2_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ2: occ { + compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi_hub2: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; + + cfam@3,0 { + reg = <3 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <3>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + }; + + cfam3_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + }; + + cfam3_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam3_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam3_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam3_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam3_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam3_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ3: occ { + compatible = "ibm,p10-occ"; + + occ-hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi_hub3: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + +&fsi_occ2 { + reg = <3>; +}; + +&fsi_occ3 { + reg = <4>; +}; + +&ibt { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + tca_pres1: tca9554@20{ + compatible = "ti,tca9554"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "", + "RUSSEL_FW_I2C_ENABLE_N", + "RUSSEL_OPPANEL_PRESENCE_N", + "BLYTH_OPPANEL_PRESENCE_N", + "CPU_TPM_CARD_PRESENT_N", + "DASD_BP2_PRESENT_N", + "DASD_BP1_PRESENT_N", + "DASD_BP0_PRESENT_N"; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + power-supply@68 { + compatible = "ibm,cffps"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps"; + reg = <0x69>; + }; + + pca_pres1: pca9552@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD", + "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD", + "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N", + "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N", + "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N", + "", "", "", "", "", ""; + }; +}; + +&i2c4 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + pca9546@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c4mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard0-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "cablecard0-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + }; + + i2c4mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + + i2c4mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + pca9546@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c5mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard3-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "cablecard3-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + }; + + i2c5mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + pca9551@61 { + compatible = "nxp,pca9551"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard4-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "cablecard4-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + tmp275@4b { + compatible = "ti,tmp275"; + reg = <0x4b>; + }; + + pca9546@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c6mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c6mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + + i2c6mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c6mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + }; +}; + +&i2c7 { + multi-master; + status = "okay"; + + pca9552@30 { + compatible = "ibm,pca9552"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "pcieslot0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "pcieslot1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "pcieslot2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "pcieslot3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "pcieslot4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "cpu1"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "cpu-vrm1"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@8 { + label = "lcd-russel"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + + pca9552@31 { + compatible = "ibm,pca9552"; + reg = <0x31>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "ddimm0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "ddimm1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "ddimm2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "ddimm3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "ddimm4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "ddimm5"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "ddimm6"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@7 { + label = "ddimm7"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@8 { + label = "ddimm8"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@9 { + label = "ddimm9"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@10 { + label = "ddimm10"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@11 { + label = "ddimm11"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@12 { + label = "ddimm12"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@13 { + label = "ddimm13"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@14 { + label = "ddimm14"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@15 { + label = "ddimm15"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + + pca9552@32 { + compatible = "ibm,pca9552"; + reg = <0x32>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "ddimm16"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "ddimm17"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "ddimm18"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "ddimm19"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "ddimm20"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "ddimm21"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "ddimm22"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@7 { + label = "ddimm23"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@8 { + label = "ddimm24"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@9 { + label = "ddimm25"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@10 { + label = "ddimm26"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@11 { + label = "ddimm27"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@12 { + label = "ddimm28"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@13 { + label = "ddimm29"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@14 { + label = "ddimm30"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@15 { + label = "ddimm31"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + + pca9552@33 { + compatible = "ibm,pca9552"; + reg = <0x33>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "planar"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "cpu0"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "dasd-pyramid0"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "dasd-pyramid1"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "dasd-pyramid2"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "cpu0-vrm0"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@7 { + label = "rtc-battery"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@8 { + label = "base-blyth"; + reg = <8>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@9 { + label = "pcieslot6"; + reg = <9>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@10 { + label = "pcieslot7"; + reg = <10>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@11 { + label = "pcieslot8"; + reg = <11>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@12 { + label = "pcieslot9"; + reg = <12>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@13 { + label = "pcieslot10"; + reg = <13>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@14 { + label = "pcieslot11"; + reg = <14>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@15 { + label = "tpm-wilson"; + reg = <15>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + + si7021-a20@40 { + compatible = "silabs,si7020"; + reg = <0x40>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + max: max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan0: fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + }; + + fan1: fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + }; + + fan2: fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + }; + + fan3: fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + }; + + fan4: fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + }; + + fan5: fan@5 { + compatible = "pmbus-fan"; + reg = <5>; + tach-pulses = <2>; + }; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "front-sys-id0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "front-check-log0"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "front-enc-fault1"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "front-sys-pwron0"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + + pca0: pca9552@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "fan0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "fan1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "fan2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "fan3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "fan4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "fan5"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c8 { + status = "okay"; + + ucd90320@11 { + compatible = "ti,ucd90320"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + pca_pres3: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "power-config-full-load", ""; + }; + + pca_pres2: pca9552@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD", + "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD", + "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD", + "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N", + "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N", + "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N", + "", "", "", ""; + }; + +}; + +&i2c9 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c10 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + tmp423b@4d { + compatible = "ti,tmp423"; + reg = <0x4d>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@49 { + compatible = "ti,tmp275"; + reg = <0x49>; + }; + + pca9546@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c11mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "cablecard10-cxp-top"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "cablecard10-cxp-bot"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; + }; + + i2c11mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + }; +}; + +&i2c12 { + status = "okay"; + + tpm@2e { + compatible = "nuvoton,npct75x"; + reg = <0x2e>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c13 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme0"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "nvme1"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "nvme2"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "nvme3"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "nvme4"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "nvme5"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "nvme6"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@7 { + label = "nvme7"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; +}; + +&i2c14 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme8"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "nvme9"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "nvme10"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "nvme11"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "nvme12"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "nvme13"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "nvme14"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@7 { + label = "nvme15"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; +}; + +&i2c15 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + led@0 { + label = "nvme16"; + reg = <0>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@1 { + label = "nvme17"; + reg = <1>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@2 { + label = "nvme18"; + reg = <2>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@3 { + label = "nvme19"; + reg = <3>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@4 { + label = "nvme20"; + reg = <4>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@5 { + label = "nvme21"; + reg = <5>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@6 { + label = "nvme22"; + reg = <6>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + + led@7 { + label = "nvme23"; + reg = <7>; + retain-state-shutdown; + default-state = "keep"; + type = ; + }; + }; +}; + +&uart2 { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&xdma { + status = "okay"; + memory-region = <&vga_memory>; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; -- cgit v1.2.3