From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 887 ++++++++++++++++++++++++++++ 1 file changed, 887 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts (limited to 'arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts') diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts new file mode 100644 index 000000000..3f6010ef2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -0,0 +1,887 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2019 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include +#include +#include + +/ { + model = "Tacoma"; + compatible = "ibm,tacoma-bmc", "aspeed,ast2600"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8 earlycon"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@b8000000 { + no-map; + reg = <0xb8000000 0x4000000>; /* 64M */ + }; + + ramoops@bc000000 { + compatible = "ramoops"; + reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + event-ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + event-ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + event-fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + event-fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + event-fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + + iio-hwmon-bmp280 { + compatible = "iio-hwmon"; + io-channels = <&bmp 1>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "fsi-mux","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "power-button","","","checkstop","","presence-ps1","","led-rear-fault", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","presence-ps0","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "led-rear-power","led-rear-id","","usb-power","","","","", + /*P0-P7*/ "","","","","","bmc-tpm-reset","","", + /*Q0-Q7*/ "cfam-reset","","","","","","","fsi-routing", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; + clk-phase-mmc-hs200 = <36>, <270>; +}; + +&fsim0 { + status = "okay"; + + #address-cells = <2>; + #size-cells = <0>; + + fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam0_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam0_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam0_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam0_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam0_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam0_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam0_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam0_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam1_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam1_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam1_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam1_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam1_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam1_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam1_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam1_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam1_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c102 = &cfam0_i2c2; + i2c103 = &cfam0_i2c3; + i2c104 = &cfam0_i2c4; + i2c105 = &cfam0_i2c5; + i2c106 = &cfam0_i2c6; + i2c107 = &cfam0_i2c7; + i2c108 = &cfam0_i2c8; + i2c109 = &cfam0_i2c9; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c200 = &cfam1_i2c0; + i2c201 = &cfam1_i2c1; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c204 = &cfam1_i2c4; + i2c205 = &cfam1_i2c5; + i2c206 = &cfam1_i2c6; + i2c207 = &cfam1_i2c7; + i2c208 = &cfam1_i2c8; + i2c209 = &cfam1_i2c9; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c212 = &cfam1_i2c12; + i2c213 = &cfam1_i2c13; + i2c214 = &cfam1_i2c14; + }; + +}; + +&i2c0 { + multi-master; + status = "okay"; + + ibm-panel@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; +}; + +&i2c1 { + status = "okay"; + + tpm: tpm@2e { + compatible = "tcg,tpm-tis-i2c"; + reg = <0x2e>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + bmp: bmp280@77 { + compatible = "bosch,bmp280"; + reg = <0x77>; + #io-channel-cells = <1>; + }; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-dual-tach; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = ; + }; + + gpio@1 { + reg = <1>; + type = ; + }; + + gpio@2 { + reg = <2>; + type = ; + }; + + gpio@3 { + reg = <3>; + type = ; + }; + + gpio@4 { + reg = <4>; + type = ; + }; + + gpio@5 { + reg = <5>; + type = ; + }; + + gpio@6 { + reg = <6>; + type = ; + }; + + gpio@7 { + reg = <7>; + type = ; + }; + + gpio@8 { + reg = <8>; + type = ; + }; + + gpio@9 { + reg = <9>; + type = ; + }; + + gpio@10 { + reg = <10>; + type = ; + }; + + gpio@11 { + reg = <11>; + type = ; + }; + + gpio@12 { + reg = <12>; + type = ; + }; + + gpio@13 { + reg = <13>; + type = ; + }; + + gpio@14 { + reg = <14>; + type = ; + }; + + gpio@15 { + reg = <15>; + type = ; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; +}; + +&i2c4 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c5 { + status = "okay"; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@70 { + compatible = "infineon,ir35221"; + reg = <0x70>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = ; + }; + + gpio@1 { + reg = <1>; + type = ; + }; + + gpio@2 { + reg = <2>; + type = ; + }; + + gpio@3 { + reg = <3>; + type = ; + }; + + gpio@4 { + reg = <4>; + type = ; + }; + + gpio@5 { + reg = <5>; + type = ; + }; + + gpio@6 { + reg = <6>; + type = ; + }; + + gpio@7 { + reg = <7>; + type = ; + }; + + gpio@8 { + reg = <8>; + type = ; + }; + + gpio@9 { + reg = <9>; + type = ; + }; + + gpio@10 { + reg = <10>; + type = ; + }; + + gpio@11 { + reg = <11>; + type = ; + }; + + gpio@12 { + reg = <12>; + type = ; + }; + + gpio@13 { + reg = <13>; + type = ; + }; + + gpio@14 { + reg = <14>; + type = ; + }; + + gpio@15 { + reg = <15>; + type = ; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&uart1 { + status = "okay"; + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&uart5 { + // Workaround for A0 + compatible = "snps,dw-apb-uart"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + +&pinctrl { + /* Hog these as no driver is probed for the entire LPC block */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpc_default>, + <&pinctrl_lsirq_default>; +}; + +&xdma { + status = "okay"; + memory-region = <&vga_memory>; +}; + +&kcs2 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8 0xcac>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; +}; -- cgit v1.2.3