From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/at91-sama7g5ek.dts | 834 +++++++++++++++++++++++++++++++++++ 1 file changed, 834 insertions(+) create mode 100644 arch/arm/boot/dts/at91-sama7g5ek.dts (limited to 'arch/arm/boot/dts/at91-sama7g5ek.dts') diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts new file mode 100644 index 000000000..aa5cc0e98 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -0,0 +1,834 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board + * + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries + * + * Author: Eugen Hristev + * Author: Claudiu Beznea + * + */ +/dts-v1/; +#include "sama7g5-pinfunc.h" +#include "sama7g5.dtsi" +#include +#include +#include +#include + +/ { + model = "Microchip SAMA7G5-EK"; + compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7"; + + chosen { + bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait"; + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &uart3; + serial1 = &uart4; + serial2 = &uart7; + serial3 = &uart0; + i2c0 = &i2c1; + i2c1 = &i2c8; + i2c2 = &i2c9; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + button { + label = "PB_USER"; + gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; /* Conflict with pwm. */ + + red_led { + label = "red"; + gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; + }; + + green_led { + label = "green"; + gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>; + }; + + blue_led { + label = "blue"; + gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + /* 512 M */ + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x20000000>; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sama7g5ek audio"; + #address-cells = <1>; + #size-cells = <0>; + simple-audio-card,dai-link@0 { + reg = <0>; + cpu { + sound-dai = <&spdiftx>; + }; + codec { + sound-dai = <&spdif_out>; + }; + }; + simple-audio-card,dai-link@1 { + reg = <1>; + cpu { + sound-dai = <&spdifrx>; + }; + codec { + sound-dai = <&spdif_in>; + }; + }; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&adc { + vddana-supply = <&vddout25>; + vref-supply = <&vddout25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <133000000>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + m25p,fast-read; + + at91bootstrap@0 { + label = "ospi: at91bootstrap"; + reg = <0x0 0x40000>; + }; + + bootloader@40000 { + label = "ospi: bootloader"; + reg = <0x40000 0xc0000>; + }; + + bootloaderenvred@100000 { + label = "ospi: bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { + label = "ospi: bootloader env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "ospi: device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "ospi: kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "ospi: rootfs"; + reg = <0x800000 0x7800000>; + }; + + }; +}; + +&dma0 { + status = "okay"; +}; + +&dma1 { + status = "okay"; +}; + +&dma2 { + status = "okay"; +}; + +&flx0 { + atmel,flexcom-mode = ; + status = "disabled"; + + uart0: serial@200 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + status = "disabled"; + }; +}; + +&flx1 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c1: i2c@600 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + + mcp16502@5b { + compatible = "microchip,mcp16502"; + reg = <0x5b>; + status = "okay"; + + regulators { + vdd_3v3: VDD_IO { + regulator-name = "VDD_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vddioddr: VDD_DDR { + regulator-name = "VDD_DDR"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1350000>; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1350000>; + regulator-mode = <4>; + }; + }; + + vddcore: VDD_CORE { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-voltage = <1150000>; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vddcpu: VDD_OTHER { + regulator-name = "VDD_OTHER"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1250000>; + regulator-initial-mode = <2>; + regulator-allowed-modes = <2>, <4>; + regulator-ramp-delay = <3125>; + regulator-always-on; + + regulator-state-standby { + regulator-on-in-suspend; + regulator-suspend-voltage = <1050000>; + regulator-mode = <4>; + }; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-mode = <4>; + }; + }; + + vldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + + regulator-state-standby { + regulator-suspend-voltage = <1800000>; + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3700000>; + + regulator-state-standby { + regulator-suspend-voltage = <1800000>; + regulator-on-in-suspend; + }; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; +}; + +&flx3 { + atmel,flexcom-mode = ; + status = "okay"; + + uart3: serial@200 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx3_default>; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = ; + status = "okay"; + + uart4: serial@200 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + status = "okay"; + }; +}; + +&flx7 { + atmel,flexcom-mode = ; + status = "okay"; + + uart7: serial@200 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx7_default>; + status = "okay"; + }; +}; + +&flx8 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c8: i2c@600 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + }; +}; + +&flx9 { + atmel,flexcom-mode = ; + status = "okay"; + + i2c9: i2c@600 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + i2c-analog-filter; + i2c-digital-filter; + i2c-digital-filter-width-ns = <35>; + status = "okay"; + }; +}; + +&flx11 { + atmel,flexcom-mode = ; + status = "okay"; + + spi11: spi@400 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>; + status = "okay"; + }; +}; + +&gmac0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gmac0_default + &pinctrl_gmac0_mdio_default + &pinctrl_gmac0_txck_default + &pinctrl_gmac0_phy_irq>; + phy-mode = "rgmii-id"; + status = "okay"; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioA>; + interrupts = ; + }; +}; + +&gmac1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gmac1_default + &pinctrl_gmac1_mdio_default + &pinctrl_gmac1_phy_irq>; + phy-mode = "rmii"; + status = "okay"; /* Conflict with pdmc0. */ + + ethernet-phy@0 { + reg = <0x0>; + interrupt-parent = <&pioA>; + interrupts = ; + }; +}; + +&i2s0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s0_default>; +}; + +&pdmc0 { + #sound-dai-cells = <0>; + microchip,mic-pos = , /* MIC 1 */ + , /* MIC 2 */ + , /* MIC 3 */ + ; /* MIC 4 */ + status = "disabled"; /* Conflict with gmac1. */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdmc0_default>; +}; + +&pioA { + + pinctrl_can0_default: can0_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_can1_default: can1_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_flx0_default: flx0_default { + pinmux = , + , + , + ; + bias-disable; + }; + + pinctrl_flx3_default: flx3_default { + pinmux = , + ; + bias-pull-up; + }; + + pinctrl_flx4_default: flx4_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_flx7_default: flx7_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_gmac0_default: gmac0_default { + pinmux = , + , + , + , + , + , + , + , + , + , + , + ; + slew-rate = <0>; + bias-disable; + }; + + pinctrl_gmac0_mdio_default: gmac0_mdio_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_gmac0_txck_default: gmac0_txck_default { + pinmux = ; + slew-rate = <0>; + bias-pull-up; + }; + + pinctrl_gmac0_phy_irq: gmac0_phy_irq { + pinmux = ; + bias-disable; + }; + + pinctrl_gmac1_default: gmac1_default { + pinmux = , + , + , + , + , + , + , + ; + slew-rate = <0>; + bias-disable; + }; + + pinctrl_gmac1_mdio_default: gmac1_mdio_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_gmac1_phy_irq: gmac1_phy_irq { + pinmux = ; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c8_default: i2c8_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c9_default: i2c9_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2s0_default: i2s0_default { + pinmux = , + , + , + , + ; + bias-disable; + }; + + pinctrl_key_gpio_default: key_gpio_default { + pinmux = ; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = , + , + ; + bias-pull-up; + }; + + pinctrl_mikrobus1_an_default: mikrobus1_an_default { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_an_default: mikrobus2_an_default { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs { + pinmux = ; + bias-disable; + }; + + pinctrl_mikrobus1_spi: mikrobus1_spi { + pinmux = , + , + ; + bias-disable; + }; + + pinctrl_pdmc0_default: pdmc0_default { + pinmux = , + , + ; + bias_disable; + }; + + pinctrl_qspi: qspi { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + ; + bias-disable; + slew-rate = <0>; + atmel,drive-strength = ; + }; + + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = , + , + , + , + , + , + , + , + ; + slew-rate = <0>; + bias-pull-up; + }; + + ck_cd_rstn_vddsel { + pinmux = , + , + ; + slew-rate = <0>; + bias-pull-up; + }; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = , + , + , + , + ; + slew-rate = <0>; + bias-pull-up; + }; + + ck_cd_rstn_vddsel { + pinmux = , + , + , + ; + slew-rate = <0>; + bias-pull-up; + }; + }; + + pinctrl_sdmmc2_default: sdmmc2_default { + cmd_data { + pinmux = , + , + , + , + ; + slew-rate = <0>; + bias-pull-up; + }; + + ck { + pinmux = ; + slew-rate = <0>; + bias-pull-up; + }; + }; + + pinctrl_spdifrx_default: spdifrx_default { + pinmux = ; + bias-disable; + }; + + pinctrl_spdiftx_default: spdiftx_default { + pinmux = ; + bias-disable; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>; + status = "disabled"; /* Conflict with leds. */ +}; + +&rtt { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; +}; + +&sdmmc0 { + bus-width = <8>; + non-removable; + sdhci-caps-mask = <0x0 0x00200000>; + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&vldo1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + no-1-8-v; + sdhci-caps-mask = <0x0 0x00200000>; + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&vdd_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + status = "okay"; +}; + +&sdmmc2 { + bus-width = <4>; + no-1-8-v; + sdhci-caps-mask = <0x0 0x00200000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc2_default>; +}; + +&shdwc { + atmel,shdwc-debouncer = <976>; + status = "okay"; + + input@0 { + reg = <0>; + }; +}; + +&spdifrx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdifrx_default>; + status = "okay"; +}; + +&spdiftx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdiftx_default>; + status = "okay"; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&trng { + status = "okay"; +}; + +&vddout25 { + vin-supply = <&vdd_3v3>; + status = "okay"; +}; -- cgit v1.2.3