From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/dra7.dtsi | 1358 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1358 insertions(+) create mode 100644 arch/arm/boot/dts/dra7.dtsi (limited to 'arch/arm/boot/dts/dra7.dtsi') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi new file mode 100644 index 000000000..97ce0c4f1 --- /dev/null +++ b/arch/arm/boot/dts/dra7.dtsi @@ -0,0 +1,1358 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ + * + * Based on "omap4.dtsi" + */ + +#include +#include +#include +#include +#include + +#define MAX_SOURCES 400 + +/ { + #address-cells = <2>; + #size-cells = <2>; + + compatible = "ti,dra7xx"; + interrupt-parent = <&crossbar_mpu>; + chosen { }; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + i2c4 = &i2c5; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + serial8 = &uart9; + serial9 = &uart10; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; + d_can0 = &dcan1; + d_can1 = &dcan2; + spi0 = &qspi; + }; + + timer { + compatible = "arm,armv7-timer"; + status = "disabled"; /* See ARM architected timer wrap erratum i940 */ + interrupts = , + , + , + ; + interrupt-parent = <&gic>; + }; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x48211000 0x0 0x1000>, + <0x0 0x48212000 0x0 0x2000>, + <0x0 0x48214000 0x0 0x2000>, + <0x0 0x48216000 0x0 0x2000>; + interrupts = ; + interrupt-parent = <&gic>; + }; + + wakeupgen: interrupt-controller@48281000 { + compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x48281000 0x0 0x1000>; + interrupt-parent = <&gic>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + operating-points-v2 = <&cpu0_opp_table>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + #cooling-cells = <2>; /* min followed by max */ + + vbb-supply = <&abb_mpu>; + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_wkup>; + + opp_nom-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1060000 850000 1150000>, + <1060000 850000 1150000>; + opp-supported-hw = <0xFF 0x01>; + opp-suspend; + }; + + opp_od-1176000000 { + opp-hz = /bits/ 64 <1176000000>; + opp-microvolt = <1160000 885000 1160000>, + <1160000 885000 1160000>; + + opp-supported-hw = <0xFF 0x02>; + }; + + opp_high@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1210000 950000 1250000>, + <1210000 950000 1250000>; + opp-supported-hw = <0xFF 0x04>; + }; + }; + + /* + * XXX: Use a flat representation of the SOC interconnect. + * The real OMAP interconnect network is quite complex. + * Since it will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp: ocp { + compatible = "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>, + <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; + + l3-noc@44000000 { + compatible = "ti,dra7-l3-noc"; + reg = <0x44000000 0x1000>, + <0x45000000 0x1000>; + interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; + + l4_cfg: interconnect@4a000000 { + }; + l4_wkup: interconnect@4ae00000 { + }; + l4_per1: interconnect@48000000 { + }; + + target-module@48210000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48210000 0x1f0000>; + + mpu { + compatible = "ti,omap5-mpu"; + }; + }; + + l4_per2: interconnect@48400000 { + }; + l4_per3: interconnect@48800000 { + }; + + /* + * Register access seems to have complex dependencies and also + * seems to need an enabled phy. See the TRM chapter for "Table + * 26-678. Main Sequence PCIe Controller Global Initialization" + * and also dra7xx_pcie_probe(). + */ + axi0: target-module@51000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + power-domains = <&prm_l3init>; + resets = <&prm_l3init 0>; + reset-names = "rstctrl"; + clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>; + clock-names = "fck", "phy-clk", "phy-clk-div"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0x51000000 0x51000000 0x3000>, + <0x20000000 0x20000000 0x10000000>; + dma-ranges; + /** + * To enable PCI endpoint mode, disable the pcie1_rc + * node and enable pcie1_ep mode. + */ + pcie1_rc: pcie@51000000 { + reg = <0x51000000 0x2000>, + <0x51002000 0x14c>, + <0x20001000 0x2000>; + reg-names = "rc_dbics", "ti_conf", "config"; + interrupts = <0 232 0x4>, <0 233 0x4>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>, + <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>; + bus-range = <0x00 0xff>; + #interrupt-cells = <1>; + num-lanes = <1>; + linux,pci-domain = <0>; + phys = <&pcie1_phy>; + phy-names = "pcie-phy0"; + ti,syscon-lane-sel = <&scm_conf_pcie 0x18>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 1>, + <0 0 0 2 &pcie1_intc 2>, + <0 0 0 3 &pcie1_intc 3>, + <0 0 0 4 &pcie1_intc 4>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; + status = "disabled"; + pcie1_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1_ep: pcie_ep@51000000 { + reg = <0x51000000 0x28>, + <0x51002000 0x14c>, + <0x51001000 0x28>, + <0x20001000 0x10000000>; + reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space"; + interrupts = <0 232 0x4>; + num-lanes = <1>; + num-ib-windows = <4>; + num-ob-windows = <16>; + phys = <&pcie1_phy>; + phy-names = "pcie-phy0"; + ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; + ti,syscon-lane-sel = <&scm_conf_pcie 0x18>; + status = "disabled"; + }; + }; + + /* + * Register access seems to have complex dependencies and also + * seems to need an enabled phy. See the TRM chapter for "Table + * 26-678. Main Sequence PCIe Controller Global Initialization" + * and also dra7xx_pcie_probe(). + */ + axi1: target-module@51800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>; + clock-names = "fck", "phy-clk", "phy-clk-div"; + power-domains = <&prm_l3init>; + resets = <&prm_l3init 1>; + reset-names = "rstctrl"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0x51800000 0x51800000 0x3000>, + <0x30000000 0x30000000 0x10000000>; + dma-ranges; + status = "disabled"; + pcie2_rc: pcie@51800000 { + reg = <0x51800000 0x2000>, + <0x51802000 0x14c>, + <0x30001000 0x2000>; + reg-names = "rc_dbics", "ti_conf", "config"; + interrupts = <0 355 0x4>, <0 356 0x4>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>, + <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>; + bus-range = <0x00 0xff>; + #interrupt-cells = <1>; + num-lanes = <1>; + linux,pci-domain = <1>; + phys = <&pcie2_phy>; + phy-names = "pcie-phy0"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 1>, + <0 0 0 2 &pcie2_intc 2>, + <0 0 0 3 &pcie2_intc 3>, + <0 0 0 4 &pcie2_intc 4>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 2>; + pcie2_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + ocmcram1: ocmcram@40300000 { + compatible = "mmio-sram"; + reg = <0x40300000 0x80000>; + ranges = <0x0 0x40300000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + /* + * This is a placeholder for an optional reserved + * region for use by secure software. The size + * of this region is not known until runtime so it + * is set as zero to either be updated to reserve + * space or left unchanged to leave all SRAM for use. + * On HS parts that that require the reserved region + * either the bootloader can update the size to + * the required amount or the node can be overridden + * from the board dts file for the secure platform. + */ + sram-hs@0 { + compatible = "ti,secure-ram"; + reg = <0x0 0x0>; + }; + }; + + /* + * NOTE: ocmcram2 and ocmcram3 are not available on all + * DRA7xx and AM57xx variants. Confirm availability in + * the data manual for the exact part number in use + * before enabling these nodes in the board dts file. + */ + ocmcram2: ocmcram@40400000 { + status = "disabled"; + compatible = "mmio-sram"; + reg = <0x40400000 0x100000>; + ranges = <0x0 0x40400000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ocmcram3: ocmcram@40500000 { + status = "disabled"; + compatible = "mmio-sram"; + reg = <0x40500000 0x100000>; + ranges = <0x0 0x40500000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + bandgap: bandgap@4a0021e0 { + reg = <0x4a0021e0 0xc + 0x4a00232c 0xc + 0x4a002380 0x2c + 0x4a0023C0 0x3c + 0x4a002564 0x8 + 0x4a002574 0x50>; + compatible = "ti,dra752-bandgap"; + interrupts = ; + #thermal-sensor-cells = <1>; + }; + + dsp1_system: dsp_system@40d00000 { + compatible = "syscon"; + reg = <0x40d00000 0x100>; + }; + + dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + }; + + target-module@43300000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43300000 0x4>, + <0x43300010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = , + , + ; + ti,sysc-sidle = , + , + ; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43300000 0x100000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x100000>; + reg-names = "edma3_cc"; + interrupts = , + , + ; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>; + + /* + * memcpy is disabled, can be enabled with: + * ti,edma-memcpy-channels = <20 21>; + * for example. Note that these channels need to be + * masked in the xbar as well. + */ + }; + }; + + target-module@43400000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43400000 0x4>, + <0x43400010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = , + , + ; + ti,sysc-sidle = , + , + ; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43400000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = ; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@43500000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43500000 0x4>, + <0x43500010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = , + , + ; + ti,sysc-sidle = , + , + ; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43500000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = ; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@4e000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4e000000 0x4>, + <0x4e000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = , + , + ; + ranges = <0x0 0x4e000000 0x2000000>; + #size-cells = <1>; + #address-cells = <1>; + + dmm@0 { + compatible = "ti,omap5-dmm"; + reg = <0 0x800>; + interrupts = ; + }; + }; + + ipu1: ipu@58820000 { + compatible = "ti,dra7-ipu"; + reg = <0x58820000 0x10000>; + reg-names = "l2ram"; + iommus = <&mmu_ipu1>; + status = "disabled"; + resets = <&prm_ipu 0>, <&prm_ipu 1>; + clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>; + firmware-name = "dra7-ipu1-fw.xem4"; + }; + + ipu2: ipu@55020000 { + compatible = "ti,dra7-ipu"; + reg = <0x55020000 0x10000>; + reg-names = "l2ram"; + iommus = <&mmu_ipu2>; + status = "disabled"; + resets = <&prm_core 0>, <&prm_core 1>; + clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>; + firmware-name = "dra7-ipu2-fw.xem4"; + }; + + dsp1: dsp@40800000 { + compatible = "ti,dra7-dsp"; + reg = <0x40800000 0x48000>, + <0x40e00000 0x8000>, + <0x40f00000 0x8000>; + reg-names = "l2ram", "l1pram", "l1dram"; + ti,bootreg = <&scm_conf 0x55c 10>; + iommus = <&mmu0_dsp1>, <&mmu1_dsp1>; + status = "disabled"; + resets = <&prm_dsp1 0>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + firmware-name = "dra7-dsp1-fw.xe66"; + }; + + target-module@40d01000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x40d01000 0x4>, + <0x40d01010 0x4>, + <0x40d01014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp1 1>; + reset-names = "rstctrl"; + ranges = <0x0 0x40d01000 0x1000>; + #size-cells = <1>; + #address-cells = <1>; + + mmu0_dsp1: mmu@0 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x0>; + }; + }; + + target-module@40d02000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x40d02000 0x4>, + <0x40d02010 0x4>, + <0x40d02014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_dsp1 1>; + reset-names = "rstctrl"; + ranges = <0x0 0x40d02000 0x1000>; + #size-cells = <1>; + #address-cells = <1>; + + mmu1_dsp1: mmu@0 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x1>; + }; + }; + + target-module@58882000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58882000 0x4>, + <0x58882010 0x4>, + <0x58882014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_ipu 2>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x58882000 0x100>; + + mmu_ipu1: mmu@0 { + compatible = "ti,dra7-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; + }; + + target-module@55082000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x55082000 0x4>, + <0x55082010 0x4>, + <0x55082014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_core 2>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x55082000 0x100>; + + mmu_ipu2: mmu@0 { + compatible = "ti,dra7-iommu"; + reg = <0x0 0x100>; + interrupts = ; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + }; + }; + + abb_mpu: regulator-abb-mpu { + compatible = "ti,abb-v3"; + regulator-name = "abb_mpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin1>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>, + <0x4ae06014 0x4>, <0x4a003b20 0xc>, + <0x4ae0c158 0x4>; + reg-names = "setup-address", "control-address", + "int-address", "efuse-address", + "ldo-address"; + ti,tranxdone-status-mask = <0x80>; + /* LDOVBBMPU_FBB_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMPU_FBB_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1160000 0 0x4 0 0x02000000 0x01F00000 + 1210000 0 0x8 0 0x02000000 0x01F00000 + >; + }; + + abb_ivahd: regulator-abb-ivahd { + compatible = "ti,abb-v3"; + regulator-name = "abb_ivahd"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin1>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>, + <0x4ae06010 0x4>, <0x4a0025cc 0xc>, + <0x4a002470 0x4>; + reg-names = "setup-address", "control-address", + "int-address", "efuse-address", + "ldo-address"; + ti,tranxdone-status-mask = <0x40000000>; + /* LDOVBBIVA_FBB_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBIVA_FBB_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1055000 0 0x0 0 0x02000000 0x01F00000 + 1150000 0 0x4 0 0x02000000 0x01F00000 + 1250000 0 0x8 0 0x02000000 0x01F00000 + >; + }; + + abb_dspeve: regulator-abb-dspeve { + compatible = "ti,abb-v3"; + regulator-name = "abb_dspeve"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin1>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>, + <0x4ae06010 0x4>, <0x4a0025e0 0xc>, + <0x4a00246c 0x4>; + reg-names = "setup-address", "control-address", + "int-address", "efuse-address", + "ldo-address"; + ti,tranxdone-status-mask = <0x20000000>; + /* LDOVBBDSPEVE_FBB_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBDSPEVE_FBB_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1055000 0 0x0 0 0x02000000 0x01F00000 + 1150000 0 0x4 0 0x02000000 0x01F00000 + 1250000 0 0x8 0 0x02000000 0x01F00000 + >; + }; + + abb_gpu: regulator-abb-gpu { + compatible = "ti,abb-v3"; + regulator-name = "abb_gpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin1>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>, + <0x4ae06010 0x4>, <0x4a003b08 0xc>, + <0x4ae0c154 0x4>; + reg-names = "setup-address", "control-address", + "int-address", "efuse-address", + "ldo-address"; + ti,tranxdone-status-mask = <0x10000000>; + /* LDOVBBGPU_FBB_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBGPU_FBB_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1090000 0 0x0 0 0x02000000 0x01F00000 + 1210000 0 0x4 0 0x02000000 0x01F00000 + 1280000 0 0x8 0 0x02000000 0x01F00000 + >; + }; + + target-module@4b300000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4b300000 0x4>, + <0x4b300010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = , + , + , + ; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b300000 0x1000>, + <0x5c000000 0x5c000000 0x4000000>; + + qspi: spi@0 { + compatible = "ti,dra7xxx-qspi"; + reg = <0 0x100>, + <0x5c000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; + clock-names = "fck"; + num-cs = <4>; + interrupts = ; + status = "disabled"; + }; + }; + + /* OCP2SCP1 */ + /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ + + target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000000 4>, + <0x50000010 4>, + <0x50000014 4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_GPMC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ + <0x00000000 0x00000000 0x40000000>; /* data */ + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + reg = <0x50000000 0x37c>; /* device IO registers */ + interrupts = ; + dmas = <&edma_xbar 4 0>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + }; + + target-module@56000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5600fe00 0x4>, + <0x5600fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = , + , + ; + ti,sysc-sidle = , + , + ; + clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x56000000 0x2000000>; + }; + + crossbar_mpu: crossbar@4a002a48 { + compatible = "ti,irq-crossbar"; + reg = <0x4a002a48 0x130>; + interrupt-controller; + interrupt-parent = <&wakeupgen>; + #interrupt-cells = <3>; + ti,max-irqs = <160>; + ti,max-crossbar-sources = ; + ti,reg-size = <2>; + ti,irqs-reserved = <0 1 2 3 5 6 131 132>; + ti,irqs-skip = <10 133 139 140>; + ti,irqs-safe-map = <0>; + }; + + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x58000000 0x800000>; + + dss: dss@0 { + compatible = "ti,dra7-dss"; + /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ + /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ + status = "disabled"; + /* CTRL_CORE_DSS_PLL_CONTROL */ + syscon-pll-ctrl = <&scm_conf 0x538>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x800000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = , + , + ; + ti,sysc-midle = , + , + ; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,dra7-dispc"; + reg = <0 0x1000>; + interrupts = ; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + /* CTRL_CORE_SMA_SW_1 */ + syscon-pol = <&scm_conf 0x534>; + }; + }; + + target-module@40000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = , + , + , + ; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000 0x40000>; + + hdmi: encoder@0 { + compatible = "ti,dra7-hdmi"; + reg = <0 0x200>, + <0x200 0x80>, + <0x300 0x80>, + <0x20000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = ; + status = "disabled"; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma_xbar 76>; + dma-names = "audio_tx"; + }; + }; + }; + }; + + target-module@59000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x59000020 0x4>; + reg-names = "rev"; + clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x59000000 0x1000>; + + bb2d: gpu@0 { + compatible = "vivante,gc"; + reg = <0x0 0x700>; + interrupts = ; + clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>; + clock-names = "core"; + }; + }; + + aes1_target: target-module@4b500000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b500080 0x4>, + <0x4b500084 0x4>, + <0x4b500088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b500000 0x1000>; + + aes1: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = ; + dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + }; + + aes2_target: target-module@4b700000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4b700080 0x4>, + <0x4b700084 0x4>, + <0x4b700088 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b700000 0x1000>; + + aes2: aes@0 { + compatible = "ti,omap4-aes"; + reg = <0 0xa0>; + interrupts = ; + dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + }; + + sham1_target: target-module@4b101000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x4b101100 0x4>, + <0x4b101110 0x4>, + <0x4b101114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b101000 0x1000>; + + sham1: sham@0 { + compatible = "ti,omap5-sham"; + reg = <0 0x300>; + interrupts = ; + dmas = <&edma_xbar 119 0>; + dma-names = "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + }; + + sham2_target: target-module@42701000 { + compatible = "ti,sysc-omap3-sham", "ti,sysc"; + reg = <0x42701100 0x4>, + <0x42701110 0x4>, + <0x42701114 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ + clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x42701000 0x1000>; + + sham2: sham@0 { + compatible = "ti,omap5-sham"; + reg = <0 0x300>; + interrupts = ; + dmas = <&edma_xbar 165 0>; + dma-names = "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + }; + + iva_hd_target: target-module@5a000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5a05a400 0x4>, + <0x5a05a410 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = , + , + ; + ti,sysc-sidle = , + , + ; + power-domains = <&prm_iva>; + resets = <&prm_iva 2>; + reset-names = "rstctrl"; + clocks = <&iva_clkctrl DRA7_IVA_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5a000000 0x5a000000 0x1000000>, + <0x5b000000 0x5b000000 0x1000000>; + + iva { + compatible = "ti,ivahd"; + }; + }; + + opp_supply_mpu: opp-supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0xc>; + ti,efuse-settings = < + /* uV offset */ + 1060000 0x0 + 1160000 0x4 + 1210000 0x8 + >; + ti,absolute-max-voltage-uv = <1500000>; + }; + + }; + + thermal_zones: thermal-zones { + #include "omap4-cpu-thermal.dtsi" + #include "omap5-gpu-thermal.dtsi" + #include "omap5-core-thermal.dtsi" + #include "dra7-dspeve-thermal.dtsi" + #include "dra7-iva-thermal.dtsi" + }; + +}; + +&cpu_thermal { + polling-delay = <500>; /* milliseconds */ + coefficients = <0 2000>; +}; + +&gpu_thermal { + coefficients = <0 2000>; +}; + +&core_thermal { + coefficients = <0 2000>; +}; + +&dspeve_thermal { + coefficients = <0 2000>; +}; + +&iva_thermal { + coefficients = <0 2000>; +}; + +&cpu_crit { + temperature = <120000>; /* milli Celsius */ +}; + +&core_crit { + temperature = <120000>; /* milli Celsius */ +}; + +&gpu_crit { + temperature = <120000>; /* milli Celsius */ +}; + +&dspeve_crit { + temperature = <120000>; /* milli Celsius */ +}; + +&iva_crit { + temperature = <120000>; /* milli Celsius */ +}; + +#include "dra7-l4.dtsi" +#include "dra7xx-clocks.dtsi" + +&prm { + prm_mpu: prm@300 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x300 0x100>; + #power-domain-cells = <0>; + }; + + prm_dsp1: prm@400 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_ipu: prm@500 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x500 0x100>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_coreaon: prm@628 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x628 0xd8>; + #power-domain-cells = <0>; + }; + + prm_core: prm@700 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_iva: prm@f00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_cam: prm@1000 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1000 0x100>; + #power-domain-cells = <0>; + }; + + prm_dss: prm@1100 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1100 0x100>; + #power-domain-cells = <0>; + }; + + prm_gpu: prm@1200 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1200 0x100>; + #power-domain-cells = <0>; + }; + + prm_l3init: prm@1300 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1300 0x100>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_l4per: prm@1400 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1400 0x100>; + #power-domain-cells = <0>; + }; + + prm_custefuse: prm@1600 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1600 0x100>; + #power-domain-cells = <0>; + }; + + prm_wkupaon: prm@1724 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1724 0x100>; + #power-domain-cells = <0>; + }; + + prm_dsp2: prm@1b00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + prm_eve1: prm@1b40 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b40 0x40>; + #power-domain-cells = <0>; + }; + + prm_eve2: prm@1b80 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b80 0x40>; + #power-domain-cells = <0>; + }; + + prm_eve3: prm@1bc0 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1bc0 0x40>; + #power-domain-cells = <0>; + }; + + prm_eve4: prm@1c00 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c00 0x60>; + #power-domain-cells = <0>; + }; + + prm_rtc: prm@1c60 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c60 0x20>; + #power-domain-cells = <0>; + }; + + prm_vpe: prm@1c80 { + compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst"; + reg = <0x1c80 0x80>; + #power-domain-cells = <0>; + }; +}; + +/* Preferred always-on timer for clockevent */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; + }; +}; + +/* Local timers, see ARM architected timer wrap erratum i940 */ +&timer15_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>; + assigned-clock-parents = <&timer_sys_clk_div>; + }; +}; + +&timer16_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>; + assigned-clock-parents = <&timer_sys_clk_div>; + }; +}; -- cgit v1.2.3