From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/exynos4210-i9100.dts | 854 +++++++++++++++++++++++++++++++++ 1 file changed, 854 insertions(+) create mode 100644 arch/arm/boot/dts/exynos4210-i9100.dts (limited to 'arch/arm/boot/dts/exynos4210-i9100.dts') diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts new file mode 100644 index 000000000..bba85011e --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -0,0 +1,854 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2020 Stenkin Evgeniy + * Copyright (c) 2020 Paul Cercueil + */ + +/dts-v1/; +#include "exynos4210.dtsi" +#include "exynos4412-ppmu-common.dtsi" + +#include +#include + +/ { + model = "Samsung Galaxy S2 (GT-I9100)"; + compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4"; + chassis-type = "handset"; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + vemmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tsp_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "TSP_FIXED_VOLTAGES"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + cam_af_28v_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "8M_AF_2.8V_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cam_io_en_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_IO_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + cam_io_12v_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "8M_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vt_core_15v_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VT_CORE_1.5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-vol-down { + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "volume down"; + debounce-interval = <10>; + }; + + key-vol-up { + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "volume up"; + debounce-interval = <10>; + }; + + key-power { + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "power"; + debounce-interval = <10>; + wakeup-source; + }; + + key-ok { + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "ok"; + debounce-interval = <10>; + }; + }; + + wlan_pwrseq: sdhci3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; + }; + + i2c_max17042_fuel: i2c-gpio-0 { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; + + battery@36 { + compatible = "maxim,max17042"; + + interrupt-parent = <&gpx2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&max17042_fuel_irq>; + pinctrl-names = "default"; + + reg = <0x36>; + maxim,over-heat-temp = <700>; + maxim,over-volt = <4500>; + }; + }; + + i2c_s5k5baf: i2c-gpio-1 { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + + image-sensor@2d { + compatible = "samsung,s5k5baf"; + reg = <0x2d>; + vdda-supply = <&cam_io_en_reg>; + vddreg-supply = <&vt_core_15v_reg>; + vddio-supply = <&vtcam_reg>; + clocks = <&camera 0>; + clock-names = "mclk"; + stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>; + rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>; + clock-frequency = <24000000>; + + port { + s5k5bafx_ep: endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; + + spi-3 { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + num-chipselects = <1>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; + sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>; + + lcd@0 { + compatible = "samsung,ld9040"; + reg = <0>; + + spi-max-frequency = <1200000>; + + vdd3-supply = <&vmipi_reg>; + vci-supply = <&vcclcd_reg>; + + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; + power-on-delay = <10>; + reset-delay = <10>; + + panel-width-mm = <90>; + panel-height-mm = <154>; + + display-timings { + timing { + clock-frequency = <23492370>; + hactive = <480>; + vactive = <800>; + hback-porch = <16>; + hfront-porch = <16>; + vback-porch = <2>; + vfront-porch = <28>; + hsync-len = <2>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_dpi_ep>; + }; + }; + }; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + + pmic_ap_clk: pmic-ap-clk { + /* Workaround for missing clock on max8997 PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&camera { + pinctrl-0 = <&cam_port_a_clk_active>; + pinctrl-names = "default"; + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>; + assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>; +}; + +&csis_1 { + status = "okay"; + vddcore-supply = <&vusb_reg>; + vddio-supply = <&vmipi_reg>; + clock-frequency = <160000000>; + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + csis1_ep: endpoint { + remote-endpoint = <&s5k5bafx_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <6>; + }; + }; +}; + +&cpu0 { + cpu0-supply = <&varm_breg>; +}; + +&cpu_thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz */ + cooling-device = <&cpu0 2 2>; + }; + map1 { + /* Corresponds to 200MHz */ + cooling-device = <&cpu0 4 4>; + }; + }; +}; + +&ehci { + status = "okay"; + + phys = <&exynos_usbphy 1>; + phy-names = "host"; +}; + +&exynos_usbphy { + status = "okay"; + + vbus-supply = <&safe1_sreg>; +}; + +&fimc_0 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_1 { + /* Back camera not implemented */ + status = "disabled"; + + assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_2 { + status = "okay"; + + assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimc_3 { + /* Back camera not implemented */ + status = "disabled"; + + assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_SCLK_MPLL>; + assigned-clock-rates = <0>, <160000000>; +}; + +&fimd { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + samsung,invert-vden; + samsung,invert-vclk; + + pinctrl-0 = <&lcd_clk>, <&lcd_data24>; + pinctrl-names = "default"; + + port@3 { + reg = <3>; + + fimd_dpi_ep: endpoint { + remote-endpoint = <&lcd_ep>; + }; + }; +}; + +&gpu { + status = "okay"; + + mali-supply = <&vg3d_breg>; +}; + +&hsotg { + status = "okay"; + + dr_mode = "otg"; + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; +}; + +&i2c_3 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c_5 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + + pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + + interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>, + <&gpx2 3 IRQ_TYPE_EDGE_FALLING>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>, + <&gpl0 0 GPIO_ACTIVE_HIGH>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>; + pinctrl-names = "default"; + + charger-supply = <&charger_reg>; + + regulators { + vadc_reg: LDO1 { + regulator-name = "VADC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + }; + valive_reg: LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + + }; + + vusb_reg: LDO3 { + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vmipi_reg: LDO4 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vhsic_reg: LDO5 { + regulator-name = "VHSIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vpda_reg: LDO6 { + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcam_reg: LDO7 { + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vusbdac_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccpda_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vtouch_reg: LDO11 { + regulator-name = "TOUCH_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vpll_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vtcam_reg: LDO12 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcclcd_reg: LDO13 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + vmotor_reg: LDO14 { + regulator-name = "VCC_2.8V_MOTOR"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vled_reg: LDO15 { + regulator-name = "LED_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + camsensor_reg: LDO16 { + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vtf_reg: LDO17 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vtouchled_reg: LDO18 { + regulator-name = "TOUCH_LED_3.3V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + vddq_reg: LDO21 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + varm_breg: BUCK1 { + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <65000>; + regulator-max-microvolt = <2225000>; + regulator-always-on; + }; + + vint_breg: BUCK2 { + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <65000>; + regulator-max-microvolt = <2225000>; + regulator-always-on; + }; + + vg3d_breg: BUCK3 { + regulator-name = "G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-microvolt-offset = <50000>; + regulator-always-on; + }; + + camisp_breg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vmem_breg: BUCK5 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vccsub_breg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; + regulator-always-on; + }; + + EN32KHZ_CP { + regulator-name = "EN32KHZ_CP"; + regulator-always-on; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <200000>; + regulator-max-microamp = <950000>; + }; + + chargercv_reg: CHARGER_CV { + regulator-name = "CHARGER_CV"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + CHARGER_TOPOFF { + regulator-name = "CHARGER_TOPOFF"; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_7 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + + magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sleep0>; + + sleep0: sleep-state { + gpa0-0-pin { + samsung,pins = "gpa0-0"; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + gpa0-1-pin { + samsung,pins = "gpa0-1"; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + gpa0-2-pin { + samsung,pins = "gpa0-2"; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + gpa0-3-pin { + samsung,pins = "gpa0-3"; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + }; +}; + +&pinctrl_1 { + mhl_int: mhl-int-pins { + samsung,pins = "gpf3-5"; + samsung,pin-pud = ; + }; + + i2c_mhl_bus: i2c-mhl-bus-pins { + samsung,pins = "gpf0-4", "gpf0-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + + usb_sel: usb-sel-pins { + samsung,pins = "gpl0-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-val = <0>; + }; + + bt_en: bt-en-pins { + samsung,pins = "gpl0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-val = <0>; + }; + + bt_res: bt-res-pins { + samsung,pins = "gpl1-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-val = <0>; + }; + + otg_gp: otg-gp-pins { + samsung,pins = "gpx3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + samsung,pin-val = <0>; + }; + + mag_mhl_gpio: mag-mhl-pins { + samsung,pins = "gpd0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + max8997_irq: max8997-irq-pins { + samsung,pins = "gpx0-7"; + samsung,pin-pud = ; + }; + + max17042_fuel_irq: max17042-fuel-irq-pins { + samsung,pins = "gpx2-3"; + samsung,pin-pud = ; + }; + + tsp224_irq: tsp224-irq-pins { + samsung,pins = "gpx0-4"; + samsung,pin-pud = ; + }; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + +&sdhci_0 { + status = "okay"; + + bus-width = <8>; + non-removable; + vmmc-supply = <&vemmc_reg>; + + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>; + pinctrl-names = "default"; +}; + +&sdhci_2 { + status = "okay"; + + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vtf_reg>; + + pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>; + pinctrl-names = "default"; +}; + +&sdhci_3 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wlan_pwrseq>; + vmmc-supply = <&vtf_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&serial_0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + + shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>; + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; + + interrupt-parent = <&gpx2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wakeup"; + }; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; -- cgit v1.2.3