From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/imx6sx.dtsi | 1431 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1431 insertions(+) create mode 100644 arch/arm/boot/dts/imx6sx.dtsi (limited to 'arch/arm/boot/dts/imx6sx.dtsi') diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi new file mode 100644 index 000000000..93ac2380c --- /dev/null +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -0,0 +1,1431 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright 2014 Freescale Semiconductor, Inc. + +#include +#include +#include +#include +#include "imx6sx-pinfunc.h" + +/ { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + ethernet0 = &fec1; + ethernet1 = &fec2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + mmc3 = &usdhc4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + spi4 = &ecspi5; + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1075000 + 198000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; + clocks = <&clks IMX6SX_CLK_ARM>, + <&clks IMX6SX_CLK_PLL2_PFD2>, + <&clks IMX6SX_CLK_STEP>, + <&clks IMX6SX_CLK_PLL1_SW>, + <&clks IMX6SX_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; + }; + }; + + ckil: clock-ckil { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock-ipp-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock-ipp-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + + anaclk1: clock-anaclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "anaclk1"; + }; + + anaclk2: clock-anaclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "anaclk2"; + }; + + mqs: mqs { + compatible = "fsl,imx6sx-mqs"; + gpr = <&gpr>; + status = "disabled"; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&gpc>; + interrupts = ; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + ocram_s: sram@8f8000 { + compatible = "mmio-sram"; + reg = <0x008f8000 0x4000>; + ranges = <0 0x008f8000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clks IMX6SX_CLK_OCRAM_S>; + }; + + ocram: sram@900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clks IMX6SX_CLK_OCRAM>; + }; + + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + + L2: cache-controller@a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = ; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + gpu: gpu@1800000 { + compatible = "vivante,gc"; + reg = <0x01800000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_GPU>, + <&clks IMX6SX_CLK_GPU>, + <&clks IMX6SX_CLK_GPU>; + clock-names = "bus", "core", "shader"; + power-domains = <&pd_pu>; + }; + + dma_apbh: dma-apbh@1804000 { + compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x01804000 0x2000>; + interrupts = , + , + , + ; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX6SX_CLK_APBH_DMA>; + }; + + gpmi: nand-controller@1806000{ + compatible = "fsl,imx6sx-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01806000 0x2000>, <0x01808000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = ; + interrupt-names = "bch"; + clocks = <&clks IMX6SX_CLK_GPMI_IO>, + <&clks IMX6SX_CLK_GPMI_APB>, + <&clks IMX6SX_CLK_GPMI_BCH>, + <&clks IMX6SX_CLK_GPMI_BCH_APB>, + <&clks IMX6SX_CLK_PER1_BCH>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + aips1: bus@2000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@2000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@2004000 { + compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = ; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>, + <&clks IMX6SX_CLK_OSC>, + <&clks IMX6SX_CLK_SPDIF>, + <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_IPG>, + <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + status = "disabled"; + }; + + ecspi1: spi@2008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ECSPI1>, + <&clks IMX6SX_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: spi@200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ECSPI2>, + <&clks IMX6SX_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: spi@2010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ECSPI3>, + <&clks IMX6SX_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: spi@2014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ECSPI4>, + <&clks IMX6SX_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@2020000 { + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + esai: esai@2024000 { + compatible = "fsl,imx6sx-esai", "fsl,imx35-esai"; + reg = <0x02024000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ESAI_IPG>, + <&clks IMX6SX_CLK_ESAI_MEM>, + <&clks IMX6SX_CLK_ESAI_EXTAL>, + <&clks IMX6SX_CLK_ESAI_IPG>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "core", "mem", "extal", + "fsys", "spba"; + dmas = <&sdma 23 21 0>, + <&sdma 24 21 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ssi1: ssi@2028000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SSI1_IPG>, + <&clks IMX6SX_CLK_SSI1>; + clock-names = "ipg", "baud"; + dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi2: ssi@202c000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SSI2_IPG>, + <&clks IMX6SX_CLK_SSI2>; + clock-names = "ipg", "baud"; + dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi3: ssi@2030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; + reg = <0x02030000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SSI3_IPG>, + <&clks IMX6SX_CLK_SSI3>; + clock-names = "ipg", "baud"; + dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + asrc: asrc@2034000 { + compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc"; + reg = <0x02034000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ASRC_IPG>, + <&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck_0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f", "spba"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, + <&sdma 19 23 1>, <&sdma 20 23 1>, + <&sdma 21 23 1>, <&sdma 22 23 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; + status = "okay"; + }; + }; + + pwm1: pwm@2080000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM1>, + <&clks IMX6SX_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + }; + + pwm2: pwm@2084000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM2>, + <&clks IMX6SX_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + }; + + pwm3: pwm@2088000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM3>, + <&clks IMX6SX_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + }; + + pwm4: pwm@208c000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM4>, + <&clks IMX6SX_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + }; + + flexcan1: can@2090000 { + compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_CAN1_IPG>, + <&clks IMX6SX_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 1>; + status = "disabled"; + }; + + flexcan2: can@2094000 { + compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02094000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_CAN2_IPG>, + <&clks IMX6SX_CLK_CAN2_SERIAL>; + clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 2>; + status = "disabled"; + }; + + gpt: timer@2098000 { + compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; + reg = <0x02098000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_GPT_BUS>, + <&clks IMX6SX_CLK_GPT_3M>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@209c000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 5 26>; + }; + + gpio2: gpio@20a0000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 31 20>; + }; + + gpio3: gpio@20a4000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 51 29>; + }; + + gpio4: gpio@20a8000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 80 32>; + }; + + gpio5: gpio@20ac000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 112 24>; + }; + + gpio6: gpio@20b0000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>; + }; + + gpio7: gpio@20b4000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020b4000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>; + }; + + kpp: keypad@20b8000 { + compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_IPG>; + status = "disabled"; + }; + + wdog1: watchdog@20bc000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_IPG>; + }; + + wdog2: watchdog@20c0000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_IPG>; + status = "disabled"; + }; + + clks: clock-controller@20c4000 { + compatible = "fsl,imx6sx-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2"; + }; + + anatop: anatop@20c8000 { + compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", + "syscon", "simple-mfd"; + reg = <0x020c8000 0x1000>; + interrupts = , + , + ; + + reg_vdd1p1: regulator-1p1 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + anatop-enable-bit = <0>; + }; + + reg_vdd3p0: regulator-3p0 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + + reg_vdd2p5: regulator-2p5 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2250000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2100000>; + anatop-max-voltage = <2875000>; + anatop-enable-bit = <0>; + }; + + reg_arm: regulator-vddcore { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddarm"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_pcie: regulator-vddpcie { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpcie"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <26>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; + }; + + usbphy1: usbphy@20c9000 { + compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USBPHY1>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@20ca000 { + compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USBPHY2>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@20cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = , ; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + value = <0x60>; + mask = <0x60>; + status = "disabled"; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = ; + linux,keycode = ; + wakeup-source; + status = "disabled"; + }; + }; + + epit1: epit@20d0000 { + reg = <0x020d0000 0x4000>; + interrupts = ; + }; + + epit2: epit@20d4000 { + reg = <0x020d4000 0x4000>; + interrupts = ; + }; + + src: reset-controller@20d8000 { + compatible = "fsl,imx6sx-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = , + ; + #reset-cells = <1>; + }; + + gpc: gpc@20dc000 { + compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + interrupt-parent = <&intc>; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_soc>; + clocks = <&clks IMX6SX_CLK_GPU>; + }; + + pd_disp: power-domain@2 { + reg = <2>; + #power-domain-cells = <0>; + clocks = <&clks IMX6SX_CLK_PXP_AXI>, + <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_LCDIF2_PIX>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_VADC>; + }; + + pd_pci: power-domain@3 { + reg = <3>; + #power-domain-cells = <0>; + power-supply = <®_pcie>; + }; + }; + }; + + iomuxc: pinctrl@20e0000 { + compatible = "fsl,imx6sx-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@20e4000 { + compatible = "fsl,imx6sx-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + sdma: dma-controller@20ec000 { + compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_IPG>, + <&clks IMX6SX_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + /* imx6sx reuses imx6q sdma firmware */ + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + }; + + aips2: bus@2100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + crypto: crypto@2100000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2100000 0x10000>; + ranges = <0 0x2100000 0x10000>; + interrupt-parent = <&intc>; + clocks = <&clks IMX6SX_CLK_CAAM_MEM>, + <&clks IMX6SX_CLK_CAAM_ACLK>, + <&clks IMX6SX_CLK_CAAM_IPG>, + <&clks IMX6SX_CLK_EIM_SLOW>; + clock-names = "mem", "aclk", "ipg", "emi_slow"; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = ; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = ; + }; + }; + + usbotg1: usb@2184000 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbotg2: usb@2184200 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbh: usb@2184400 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + fsl,anatop = <&anatop>; + dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbmisc: usbmisc@2184800 { + #index-cells = <1>; + compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks IMX6SX_CLK_USBOH3>; + }; + + fec1: ethernet@2188000 { + compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupt-names = "int0", "pps"; + interrupts = , + ; + clocks = <&clks IMX6SX_CLK_ENET>, + <&clks IMX6SX_CLK_ENET_AHB>, + <&clks IMX6SX_CLK_ENET_PTP>, + <&clks IMX6SX_CLK_ENET_REF>, + <&clks IMX6SX_CLK_ENET_PTP>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + fsl,stop-mode = <&gpr 0x10 3>; + status = "disabled"; + }; + + mlb: mlb@218c000 { + reg = <0x0218c000 0x4000>; + interrupts = , + , + ; + clocks = <&clks IMX6SX_CLK_MLB>; + status = "disabled"; + }; + + usdhc1: mmc@2190000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USDHC1>, + <&clks IMX6SX_CLK_USDHC1>, + <&clks IMX6SX_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc@2194000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USDHC2>, + <&clks IMX6SX_CLK_USDHC2>, + <&clks IMX6SX_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc@2198000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USDHC3>, + <&clks IMX6SX_CLK_USDHC3>, + <&clks IMX6SX_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc4: mmc@219c000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x0219c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USDHC4>, + <&clks IMX6SX_CLK_USDHC4>, + <&clks IMX6SX_CLK_USDHC4>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@21a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@21a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@21a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_I2C3>; + status = "disabled"; + }; + + memory-controller@21b0000 { + compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>; + }; + + fec2: ethernet@21b4000 { + compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; + reg = <0x021b4000 0x4000>; + interrupt-names = "int0", "pps"; + interrupts = , + ; + clocks = <&clks IMX6SX_CLK_ENET>, + <&clks IMX6SX_CLK_ENET_AHB>, + <&clks IMX6SX_CLK_ENET_PTP>, + <&clks IMX6SX_CLK_ENET2_REF_125M>, + <&clks IMX6SX_CLK_ENET_PTP>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,stop-mode = <&gpr 0x10 4>; + status = "disabled"; + }; + + weim: weim@21b8000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_EIM_SLOW>; + fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; + }; + + ocotp: efuse@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sx-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCOTP>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; + }; + + sai1: sai@21d4000 { + compatible = "fsl,imx6sx-sai"; + reg = <0x021d4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SAI1_IPG>, + <&clks IMX6SX_CLK_SAI1>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 31 24 0>, <&sdma 32 24 0>; + status = "disabled"; + }; + + audmux: audmux@21d8000 { + compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + sai2: sai@21dc000 { + compatible = "fsl,imx6sx-sai"; + reg = <0x021dc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SAI2_IPG>, + <&clks IMX6SX_CLK_SAI2>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 33 24 0>, <&sdma 34 24 0>; + status = "disabled"; + }; + + qspi1: spi@21e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-qspi"; + reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = ; + clocks = <&clks IMX6SX_CLK_QSPI1>, + <&clks IMX6SX_CLK_QSPI1>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + qspi2: spi@21e4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-qspi"; + reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = ; + clocks = <&clks IMX6SX_CLK_QSPI2>, + <&clks IMX6SX_CLK_QSPI2>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + uart2: serial@21e8000 { + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021e8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@21ec000 { + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021ec000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@21f0000 { + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@21f4000 { + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c4: i2c@21f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_I2C4>; + status = "disabled"; + }; + }; + + aips3: bus@2200000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02200000 0x100000>; + ranges; + + spba-bus@2240000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02240000 0x40000>; + ranges; + + csi1: csi@2214000 { + reg = <0x02214000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_DCIC1>; + clock-names = "disp-axi", "csi_mclk", "dcic"; + status = "disabled"; + }; + + pxp: pxp@2218000 { + compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp"; + reg = <0x02218000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PXP_AXI>; + clock-names = "axi"; + power-domains = <&pd_disp>; + status = "disabled"; + }; + + csi2: csi@221c000 { + reg = <0x0221c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_DCIC2>; + clock-names = "disp-axi", "csi_mclk", "dcic"; + status = "disabled"; + }; + + lcdif1: lcdif@2220000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; + reg = <0x02220000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + power-domains = <&pd_disp>; + status = "disabled"; + }; + + lcdif2: lcdif@2224000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; + reg = <0x02224000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + power-domains = <&pd_disp>; + status = "disabled"; + }; + + vadc: vadc@2228000 { + reg = <0x02228000 0x4000>, <0x0222c000 0x4000>; + reg-names = "vadc-vafe", "vadc-vdec"; + clocks = <&clks IMX6SX_CLK_VADC>, + <&clks IMX6SX_CLK_CSI>; + clock-names = "vadc", "csi"; + power-domains = <&pd_disp>; + status = "disabled"; + }; + }; + + adc1: adc@2280000 { + compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; + reg = <0x02280000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "adc"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; + status = "disabled"; + }; + + adc2: adc@2284000 { + compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; + reg = <0x02284000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "adc"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; + status = "disabled"; + }; + + wdog3: watchdog@2288000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x02288000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_IPG>; + status = "disabled"; + }; + + ecspi5: spi@228c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x0228c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ECSPI5>, + <&clks IMX6SX_CLK_ECSPI5>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart6: serial@22a0000 { + compatible = "fsl,imx6sx-uart", + "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x022a0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + pwm5: pwm@22a4000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022a4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM5>, + <&clks IMX6SX_CLK_PWM5>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + }; + + pwm6: pwm@22a8000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022a8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM6>, + <&clks IMX6SX_CLK_PWM6>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + }; + + pwm7: pwm@22ac000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022ac000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM7>, + <&clks IMX6SX_CLK_PWM7>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + }; + + pwm8: pwm@22b0000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022b0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM8>, + <&clks IMX6SX_CLK_PWM8>; + clock-names = "ipg", "per"; + #pwm-cells = <3>; + }; + }; + + pcie: pcie@8ffc000 { + compatible = "fsl,imx6sx-pcie"; + reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x08f80000 0 0x00010000>, /* downstream I/O */ + <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PCIE_AXI>, + <&clks IMX6SX_CLK_LVDS1_OUT>, + <&clks IMX6SX_CLK_PCIE_REF_125M>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi"; + power-domains = <&pd_disp>, <&pd_pci>; + power-domain-names = "pcie", "pcie_phy"; + status = "disabled"; + }; + }; +}; -- cgit v1.2.3