From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/imx7-mba7.dtsi | 640 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 640 insertions(+) create mode 100644 arch/arm/boot/dts/imx7-mba7.dtsi (limited to 'arch/arm/boot/dts/imx7-mba7.dtsi') diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi new file mode 100644 index 000000000..3df6dff77 --- /dev/null +++ b/arch/arm/boot/dts/imx7-mba7.dtsi @@ -0,0 +1,640 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Device Tree Include file for TQ-Systems MBa7 carrier board. + * + * Copyright (C) 2016 TQ-Systems GmbH + * Author: Markus Niebel + * Copyright (C) 2019 Bruno Thomsen + * + * Note: This file does not include nodes for all peripheral devices. + * As device driver coverage increases additional nodes can be added. + */ + +#include +#include + +/ { + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc1; + /delete-property/ mmc2; + }; + + beeper { + compatible = "gpio-beeper"; + gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = &uart6; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + + button-0 { + /* #SWITCH_A */ + label = "S11"; + linux,code = ; + gpios = <&pca9555 13 GPIO_ACTIVE_LOW>; + }; + + button-1 { + /* #SWITCH_B */ + label = "S12"; + linux,code = ; + gpios = <&pca9555 14 GPIO_ACTIVE_LOW>; + }; + + button-2 { + /* #SWITCH_C */ + label = "S13"; + linux,code = ; + gpios = <&pca9555 15 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led1 { + label = "led1"; + gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_SD1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_fec1_pwdn: regulator-fec1-pwdn { + compatible = "regulator-fixed"; + regulator-name = "PWDN_FEC1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_fec2_pwdn: regulator-fec2-pwdn { + compatible = "regulator-fixed"; + regulator-name = "PWDN_FEC2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mpcie_1v5: regulator-mpcie-1v5 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V5_MPCIE"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_mpcie_3v3: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_MPCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_mba_12v0: regulator-mba-12v0 { + compatible = "regulator-fixed"; + regulator-name = "VCC12V0_MBA7"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lvds_transmitter: regulator-lvds-transmitter { + compatible = "regulator-fixed"; + regulator-name = "#SHTDN_LVDS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_REF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&sw2_reg>; + }; + + reg_audio_3v3: regulator-audio-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3_AUDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>, + <&gpio4 2 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-supply = <®_fec1_pwdn>; + phy-handle = <ðphy1_0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1_0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,clk-output-sel = ; + }; + }; +}; + +&flash0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot@0 { + label = "U-Boot"; + reg = <0x0 0xd0000>; + }; + + env1@d0000 { + label = "ENV1"; + reg = <0xd0000 0x10000>; + }; + + env2@e0000 { + label = "ENV2"; + reg = <0xe0000 0x10000>; + }; + + dtb@f0000 { + label = "DTB"; + reg = <0xf0000 0x10000>; + }; + + linux@100000 { + label = "Linux"; + reg = <0x100000 0x700000>; + }; + + rootfs@800000 { + label = "RootFS"; + reg = <0x800000 0x3800000>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + lm75: temperature-sensor@49 { + compatible = "national,lm75"; + reg = <0x49>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; + clock-names = "mclk"; + ldoin-supply = <®_audio_3v3>; + iov-supply = <®_audio_3v3>; + }; + + pca9555: gpio-expander@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9555>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio7>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_mba7_1>; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x7c + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x74 + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x74 + MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x74 + MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x74 + MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x74 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c + MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 + MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 + MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x74 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x02 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x00 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x79 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x79 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x79 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 + /* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */ + MX7D_PAD_ENET1_COL__GPIO7_IO15 0x40000070 + /* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x40000078 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x5a + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x52 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x5a + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x52 + >; + }; + + pinctrl_hog_mba7_1: hogmba71grp { + fsl,pins = < + /* Limitation: WDOG2_B / WDOG2_RESET not usable */ + MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x4000007c + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x40000074 + /* #BOOT_EN */ + MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x40000010 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000078 + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000078 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x40000078 + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x40000078 + >; + }; + + pinctrl_pca9555: pca95550grp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x78 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x11 + MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK 0x1c + MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1c + MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC 0x1c + + MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1c + MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x14 + MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x14 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x7e + MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x76 + MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x76 + MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x7e + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e + MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 + MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x76 + MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x7e + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x7e + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x76 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x7d + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x75 + MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x75 + MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x7d + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x7e + MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x76 + MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x76 + /* Limitation: RTS is not connected */ + MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x7e + >; + }; + + pinctrl_usdhc1_gpio: usdhc1grp_gpio { + fsl,pins = < + /* WP */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x7c + /* CD */ + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x7c + /* VSELECT */ + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5e + MX7D_PAD_SD1_CLK__SD1_CLK 0x57 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5e + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5e + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5e + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5e + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x57 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x57 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_pwm1: pwm1grp { + fsl,pins = < + /* LCD_CONTRAST */ + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x50 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x5c + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59 + >; + }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x30 + >; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <36864000>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +&usbh { + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + vbus-supply = <®_usb_otg1_vbus>; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sd1_vmmc>; + bus-width = <4>; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; +}; -- cgit v1.2.3