From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/imx7ulp.dtsi | 463 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 463 insertions(+) create mode 100644 arch/arm/boot/dts/imx7ulp.dtsi (limited to 'arch/arm/boot/dts/imx7ulp.dtsi') diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi new file mode 100644 index 000000000..7f7d2d512 --- /dev/null +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng + */ + +#include +#include +#include + +#include "imx7ulp-pinfunc.h" + +/ { + interrupt-parent = <&intc>; + + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio_ptc; + gpio1 = &gpio_ptd; + gpio2 = &gpio_pte; + gpio3 = &gpio_ptf; + i2c0 = &lpi2c6; + i2c1 = &lpi2c7; + mmc0 = &usdhc0; + mmc1 = &usdhc1; + serial0 = &lpuart4; + serial1 = &lpuart5; + serial2 = &lpuart6; + serial3 = &lpuart7; + usbphy0 = &usbphy1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf00>; + }; + }; + + intc: interrupt-controller@40021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x40021000 0x1000>, + <0x40022000 0x1000>; + }; + + rosc: clock-rosc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "rosc"; + #clock-cells = <0>; + }; + + sosc: clock-sosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "sosc"; + #clock-cells = <0>; + }; + + sirc: clock-sirc { + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-output-names = "sirc"; + #clock-cells = <0>; + }; + + firc: clock-firc { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + clock-output-names = "firc"; + #clock-cells = <0>; + }; + + upll: clock-upll { + compatible = "fixed-clock"; + clock-frequency = <480000000>; + clock-output-names = "upll"; + #clock-cells = <0>; + }; + + ahbbridge0: bus@40000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x800000>; + ranges; + + edma1: dma-controller@40080000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x40080000 0x2000>, + <0x40210000 0x1000>; + dma-channels = <32>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + clock-names = "dma", "dmamux0"; + clocks = <&pcc2 IMX7ULP_CLK_DMA1>, + <&pcc2 IMX7ULP_CLK_DMA_MUX1>; + }; + + crypto: crypto@40240000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40240000 0x10000>; + ranges = <0 0x40240000 0x10000>; + clocks = <&pcc2 IMX7ULP_CLK_CAAM>, + <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = ; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = ; + }; + }; + + lpuart4: serial@402d0000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x402d0000 0x1000>; + interrupts = ; + clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; + clock-names = "ipg"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + assigned-clock-rates = <24000000>; + status = "disabled"; + }; + + lpuart5: serial@402e0000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x402e0000 0x1000>; + interrupts = ; + clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; + clock-names = "ipg"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + tpm4: pwm@40250000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x40250000 0x1000>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + #pwm-cells = <3>; + status = "disabled"; + }; + + tpm5: tpm@40260000 { + compatible = "fsl,imx7ulp-tpm"; + reg = <0x40260000 0x1000>; + interrupts = ; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&pcc2 IMX7ULP_CLK_LPTPM5>; + clock-names = "ipg", "per"; + }; + + usbotg1: usb@40330000 { + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb"; + reg = <0x40330000 0x200>; + interrupts = ; + clocks = <&pcc2 IMX7ULP_CLK_USB0>; + phys = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc1: usbmisc@40330200 { + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x40330200 0x200>; + }; + + usbphy1: usb-phy@40350000 { + compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy"; + reg = <0x40350000 0x1000>; + interrupts = ; + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; + #phy-cells = <0>; + }; + + usdhc0: mmc@40370000 { + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x40370000 0x10000>; + interrupts = ; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC0>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; + status = "disabled"; + }; + + usdhc1: mmc@40380000 { + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x40380000 0x10000>; + interrupts = ; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; + status = "disabled"; + }; + + scg1: clock-controller@403e0000 { + compatible = "fsl,imx7ulp-scg1"; + reg = <0x403e0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&sirc>, + <&firc>, <&upll>; + clock-names = "rosc", "sosc", "sirc", + "firc", "upll"; + #clock-cells = <1>; + }; + + wdog1: watchdog@403d0000 { + compatible = "fsl,imx7ulp-wdt"; + reg = <0x403d0000 0x10000>; + interrupts = ; + clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; + timeout-sec = <40>; + }; + + pcc2: clock-controller@403f0000 { + compatible = "fsl,imx7ulp-pcc2"; + reg = <0x403f0000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", + "firc_bus_clk", "rosc", "spll_bus_clk"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + }; + + smc1: clock-controller@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>, + <&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>; + clock-names = "divcore", "hsrun_divcore"; + }; + + pcc3: clock-controller@40b30000 { + compatible = "fsl,imx7ulp-pcc3"; + reg = <0x40b30000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", + "firc_bus_clk", "rosc", "spll_bus_clk"; + }; + }; + + ahbbridge1: bus@40800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40800000 0x800000>; + ranges; + + lpi2c6: i2c@40a40000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40a40000 0x10000>; + interrupts = ; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>, + <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpi2c7: i2c@40a50000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40a50000 0x10000>; + interrupts = ; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>, + <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; + clock-names = "per", "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart6: serial@40a60000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x40a60000 0x1000>; + interrupts = ; + clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart7: serial@40a70000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x40a70000 0x1000>; + interrupts = ; + clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + memory-controller@40ab0000 { + compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc"; + reg = <0x40ab0000 0x1000>; + clocks = <&pcc3 IMX7ULP_CLK_MMDC>; + }; + + iomuxc1: pinctrl@40ac0000 { + compatible = "fsl,imx7ulp-iomuxc1"; + reg = <0x40ac0000 0x1000>; + }; + + gpio_ptc: gpio@40ae0000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40ae0000 0x1000 0x400f0000 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLC>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 0 20>; + }; + + gpio_ptd: gpio@40af0000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40af0000 0x1000 0x400f0040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLD>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 32 12>; + }; + + gpio_pte: gpio@40b00000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40b00000 0x1000 0x400f0080 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 64 16>; + }; + + gpio_ptf: gpio@40b10000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40b10000 0x1000 0x400f00c0 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLF>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 96 20>; + }; + }; + + m4aips1: bus@41080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x41080000 0x80000>; + ranges; + + sim: sim@410a3000 { + compatible = "fsl,imx7ulp-sim", "syscon"; + reg = <0x410a3000 0x1000>; + }; + + ocotp: efuse@410a6000 { + compatible = "fsl,imx7ulp-ocotp", "syscon"; + reg = <0x410a6000 0x4000>; + clocks = <&scg1 IMX7ULP_CLK_DUMMY>; + }; + }; +}; -- cgit v1.2.3