From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/keystone-k2g.dtsi | 644 ++++++++++++++++++++++++++++++++++++ 1 file changed, 644 insertions(+) create mode 100644 arch/arm/boot/dts/keystone-k2g.dtsi (limited to 'arch/arm/boot/dts/keystone-k2g.dtsi') diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi new file mode 100644 index 000000000..380dd9d63 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -0,0 +1,644 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for K2G SOC + * + * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include +#include +#include + +/ { + compatible = "ti,k2g","ti,keystone"; + model = "Texas Instruments K2G SoC"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + chosen { }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + rproc0 = &dsp0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <0>; + }; + }; + + gic: interrupt-controller@2561000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x02561000 0x0 0x1000>, + <0x0 0x02562000 0x0 0x2000>, + <0x0 0x02564000 0x0 0x2000>, + <0x0 0x02566000 0x0 0x2000>; + interrupts = ; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = + , + , + , + ; + }; + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = ; + }; + + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + usb0_phy: usb-phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + status = "disabled"; + }; + + usb1_phy: usb-phy@1 { + compatible = "usb-nop-xceiv"; + reg = <1>; + status = "disabled"; + }; + }; + + soc0: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + #pinctrl-cells = <1>; + compatible = "ti,keystone","simple-bus"; + ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + + msm_ram: sram@c000000 { + compatible = "mmio-sram"; + reg = <0x0c000000 0x100000>; + ranges = <0x0 0x0c000000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + + bm-sram@f7000 { + reg = <0x000f7000 0x8000>; + }; + }; + + k2g_pinctrl: pinmux@2621000 { + compatible = "pinctrl-single"; + reg = <0x02621000 0x410>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x001b0007>; + }; + + devctrl: device-state-control@2620000 { + compatible = "ti,keystone-devctrl", "syscon", "simple-mfd"; + reg = <0x02620000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x02620000 0x1000>; + + kirq0: keystone_irq@2a0 { + compatible = "ti,keystone-irq"; + reg = <0x2a0 0x10>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + ti,syscon-dev = <&devctrl 0x2a0>; + }; + + dspgpio0: keystone_dsp_gpio@240 { + compatible = "ti,keystone-dsp-gpio"; + reg = <0x240 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio,syscon-dev = <&devctrl 0x240>; + }; + }; + + uart0: serial@2530c00 { + compatible = "ti,da830-uart", "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02530c00 0x100>; + interrupts = ; + clocks = <&k2g_clks 0x2c 0>; + power-domains = <&k2g_pds 0x2c>; + status = "disabled"; + }; + + uart1: serial@2531000 { + compatible = "ti,da830-uart", "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02531000 0x100>; + interrupts = ; + clocks = <&k2g_clks 0x2d 0>; + power-domains = <&k2g_pds 0x2d>; + status = "disabled"; + }; + + uart2: serial@2531400 { + compatible = "ti,da830-uart", "ns16550a"; + current-speed = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + reg = <0x02531400 0x100>; + interrupts = ; + clocks = <&k2g_clks 0x2e 0>; + power-domains = <&k2g_pds 0x2e>; + status = "disabled"; + }; + + dcan0: can@260b200 { + compatible = "ti,am4372-d_can", "ti,am3352-d_can"; + reg = <0x0260B200 0x200>; + interrupts = ; + status = "disabled"; + power-domains = <&k2g_pds 0x0008>; + clocks = <&k2g_clks 0x0008 1>; + }; + + dcan1: can@260b400 { + compatible = "ti,am4372-d_can", "ti,am3352-d_can"; + reg = <0x0260B400 0x200>; + interrupts = ; + status = "disabled"; + power-domains = <&k2g_pds 0x0009>; + clocks = <&k2g_clks 0x0009 1>; + }; + + i2c0: i2c@2530000 { + compatible = "ti,keystone-i2c"; + reg = <0x02530000 0x400>; + clocks = <&k2g_clks 0x003a 0>; + power-domains = <&k2g_pds 0x003a>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@2530400 { + compatible = "ti,keystone-i2c"; + reg = <0x02530400 0x400>; + clocks = <&k2g_clks 0x003b 0>; + power-domains = <&k2g_pds 0x003b>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@2530800 { + compatible = "ti,keystone-i2c"; + reg = <0x02530800 0x400>; + clocks = <&k2g_clks 0x003c 0>; + power-domains = <&k2g_pds 0x003c>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dsp0: dsp@10800000 { + compatible = "ti,k2g-dsp"; + reg = <0x10800000 0x00100000>, + <0x10e00000 0x00008000>, + <0x10f00000 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + power-domains = <&k2g_pds 0x0046>; + ti,syscon-dev = <&devctrl 0x844>; + resets = <&k2g_reset 0x0046 0x1>; + interrupt-parent = <&kirq0>; + interrupts = <0 8>; + interrupt-names = "vring", "exception"; + kick-gpios = <&dspgpio0 27 0>; + status = "disabled"; + }; + + msgmgr: mailbox@2a00000 { + compatible = "ti,k2g-message-manager"; + #mbox-cells = <2>; + reg-names = "queue_proxy_region", + "queue_state_debug_region"; + reg = <0x02a00000 0x400000>, <0x028c3400 0x400>; + interrupt-names = "rx_005", + "rx_057"; + interrupts = , + ; + }; + + pmmc: system-controller@2921c00 { + compatible = "ti,k2g-sci"; + /* + * In case of rare platforms that does not use k2g as + * system master, use /delete-property/ + */ + ti,system-reboot-controller; + mbox-names = "rx", "tx"; + mboxes = <&msgmgr 5 2>, + <&msgmgr 0 0>; + reg-names = "debug_messages"; + reg = <0x02921c00 0x400>; + + k2g_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + k2g_clks: clock-controller { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k2g_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + gpio0: gpio@2603000 { + compatible = "ti,k2g-gpio", "ti,keystone-gpio"; + reg = <0x02603000 0x100>; + gpio-controller; + #gpio-cells = <2>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k2g_clks 0x001b 0x0>; + clock-names = "gpio"; + }; + + gpio1: gpio@260a000 { + compatible = "ti,k2g-gpio", "ti,keystone-gpio"; + reg = <0x0260a000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupts = , + , + , + , + ; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <68>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k2g_clks 0x001c 0x0>; + clock-names = "gpio"; + }; + + dss: dss@02540000 { + compatible = "ti,k2g-dss"; + reg = <0x02540000 0x400>, + <0x02550000 0x1000>, + <0x02557000 0x1000>, + <0x0255a800 0x100>, + <0x0255ac00 0x100>; + reg-names = "cfg", "common", "vid1", "ovr1", "vp1"; + clocks = <&k2g_clks 0x2 0>, + <&k2g_clks 0x2 1>; + clock-names = "fck", "vp1"; + interrupts = ; + + power-domains = <&k2g_pds 0x2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + max-memory-bandwidth = <230000000>; + }; + + edma0: edma@2700000 { + compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; + reg = <0x02700000 0x8000>; + reg-names = "edma3_cc"; + interrupts = , + , + ; + interrupt-names = "edma3_ccint", "emda3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; + + ti,edma-memcpy-channels = <32 33 34 35>; + + power-domains = <&k2g_pds 0x3f>; + }; + + edma0_tptc0: tptc@2760000 { + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; + reg = <0x02760000 0x400>; + power-domains = <&k2g_pds 0x3f>; + }; + + edma0_tptc1: tptc@2768000 { + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; + reg = <0x02768000 0x400>; + power-domains = <&k2g_pds 0x3f>; + }; + + edma1: edma@2728000 { + compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; + reg = <0x02728000 0x8000>; + reg-names = "edma3_cc"; + interrupts = , + , + ; + interrupt-names = "edma3_ccint", "emda3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>; + + /* + * memcpy is disabled, can be enabled with: + * ti,edma-memcpy-channels = <12 13 14 15>; + * for example. + */ + + power-domains = <&k2g_pds 0x4f>; + }; + + edma1_tptc0: tptc@27b0000 { + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; + reg = <0x027b0000 0x400>; + power-domains = <&k2g_pds 0x4f>; + }; + + edma1_tptc1: tptc@27b8000 { + compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; + reg = <0x027b8000 0x400>; + power-domains = <&k2g_pds 0x4f>; + }; + + mmc0: mmc@23000000 { + compatible = "ti,k2g-sdhci"; + reg = <0x23000000 0x400>; + interrupts = ; + bus-width = <4>; + no-1-8-v; + max-frequency = <96000000>; + power-domains = <&k2g_pds 0xb>; + clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>; + clock-names = "fck", "mmchsdb_fck"; + status = "disabled"; + }; + + mmc1: mmc@23100000 { + compatible = "ti,k2g-sdhci"; + reg = <0x23100000 0x400>; + interrupts = ; + bus-width = <8>; + no-1-8-v; + non-removable; + max-frequency = <96000000>; + power-domains = <&k2g_pds 0xc>; + clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>; + clock-names = "fck", "mmchsdb_fck"; + }; + + qspi: spi@2940000 { + compatible = "ti,k2g-qspi", "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02940000 0x1000>, + <0x24000000 0x4000000>; + interrupts = ; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x24000000>; + clocks = <&k2g_clks 0x43 0x0>; + power-domains = <&k2g_pds 0x43>; + status = "disabled"; + }; + + mcasp0: mcasp@2340000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x02340000 0x2000>, + <0x21804000 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma0 24 1>, <&edma0 25 1>; + dma-names = "tx", "rx"; + power-domains = <&k2g_pds 0x4>; + clocks = <&k2g_clks 0x4 0>; + clock-names = "fck"; + status = "disabled"; + }; + + mcasp1: mcasp@2342000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x02342000 0x2000>, + <0x21804400 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma1 48 1>, <&edma1 49 1>; + dma-names = "tx", "rx"; + power-domains = <&k2g_pds 0x5>; + clocks = <&k2g_clks 0x5 0>; + clock-names = "fck"; + status = "disabled"; + }; + + mcasp2: mcasp@2344000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x02344000 0x2000>, + <0x21804800 0x1000>; + reg-names = "mpu","dat"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&edma1 50 1>, <&edma1 51 1>; + dma-names = "tx", "rx"; + power-domains = <&k2g_pds 0x6>; + clocks = <&k2g_clks 0x6 0>; + clock-names = "fck"; + status = "disabled"; + }; + + keystone_usb0: keystone-dwc3@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + interrupts = ; + ranges; + dma-coherent; + dma-ranges; + status = "disabled"; + power-domains = <&k2g_pds 0x0016>; + + usb0: usb@2690000 { + compatible = "snps,dwc3"; + reg = <0x2690000 0x10000>; + interrupts = ; + maximum-speed = "high-speed"; + dr_mode = "otg"; + usb-phy = <&usb0_phy>; + status = "disabled"; + }; + }; + + keystone_usb1: keystone-dwc3@2580000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2580000 0x10000>; + interrupts = ; + ranges; + dma-coherent; + dma-ranges; + status = "disabled"; + power-domains = <&k2g_pds 0x0017>; + + usb1: usb@2590000 { + compatible = "snps,dwc3"; + reg = <0x2590000 0x10000>; + interrupts = ; + maximum-speed = "high-speed"; + dr_mode = "otg"; + usb-phy = <&usb1_phy>; + status = "disabled"; + }; + }; + + ecap0: pwm@21d1800 { + compatible = "ti,k2g-ecap", "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x021d1800 0x60>; + power-domains = <&k2g_pds 0x38>; + clocks = <&k2g_clks 0x38 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap1: pwm@21d1c00 { + compatible = "ti,k2g-ecap", "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x021d1c00 0x60>; + power-domains = <&k2g_pds 0x39>; + clocks = <&k2g_clks 0x39 0x0>; + clock-names = "fck"; + status = "disabled"; + }; + + spi0: spi@21805400 { + compatible = "ti,keystone-spi"; + reg = <0x21805400 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0010>; + clocks = <&k2g_clks 0x0010 0>; + }; + + spi1: spi@21805800 { + compatible = "ti,keystone-spi"; + reg = <0x21805800 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0011>; + clocks = <&k2g_clks 0x0011 0>; + }; + + spi2: spi@21805c00 { + compatible = "ti,keystone-spi"; + reg = <0x21805C00 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0012>; + clocks = <&k2g_clks 0x0012 0>; + }; + + spi3: spi@21806000 { + compatible = "ti,keystone-spi"; + reg = <0x21806000 0x200>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k2g_pds 0x0013>; + clocks = <&k2g_clks 0x0013 0>; + }; + + wdt: wdt@02250000 { + compatible = "ti,keystone-wdt", "ti,davinci-wdt"; + reg = <0x02250000 0x80>; + power-domains = <&k2g_pds 0x22>; + clocks = <&k2g_clks 0x22 0>; + }; + + emif: emif@21010000 { + compatible = "ti,emif-keystone"; + reg = <0x21010000 0x200>; + interrupts = ; + }; + + mdio: mdio@4200f00 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + reg = <0x04200f00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k2g_clks 0x0018 3>; + clock-names = "fck"; + power-domains = <&k2g_pds 0x0018>; + status = "disabled"; + bus_freq = <2500000>; + }; + #include "keystone-k2g-netcp.dtsi" + }; +}; -- cgit v1.2.3