From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/mba6ulx.dtsi | 569 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 569 insertions(+) create mode 100644 arch/arm/boot/dts/mba6ulx.dtsi (limited to 'arch/arm/boot/dts/mba6ulx.dtsi') diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi new file mode 100644 index 000000000..5bf831b07 --- /dev/null +++ b/arch/arm/boot/dts/mba6ulx.dtsi @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel + */ + +/ { + model = "TQ-Systems MBA6ULx Baseboard"; + + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc1; + rtc0 = &rtc0; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <®_mba6ul_3v3>; + enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + beeper: beeper { + compatible = "gpio-beeper"; + gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buttons>; + + button1 { + label = "s14"; + linux,code = ; + gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>; + }; + + button2 { + label = "s6"; + linux,code = ; + gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>; + }; + + button3 { + label = "s7"; + linux,code = ; + gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>; + }; + + power-button { + label = "POWER"; + linux,code = ; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status = "okay"; + + led1 { + label = "led1"; + gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_lcd_pwr: regulator-lcd-pwr { + compatible = "regulator-fixed"; + regulator-name = "lcd-pwr"; + gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_mba6ul_3v3: regulator-mba6ul-3v3 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_mba6ul_5v0: regulator-mba6ul-5v0 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_mpcie: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "mpcie-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + startup-delay-us = <500000>; + vin-supply = <®_mba6ul_3v3>; + }; + + reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 { + compatible = "regulator-fixed"; + gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "otg2-vbus-supply-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_mpcie>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x6000000>; + linux,cma-default; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + audio-asrc = <&asrc>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <768000000>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-cs = <1>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + reg = <0>; + max-speed = <100>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + reg = <1>; + max-speed = <100>; + }; + }; +}; + +&i2c4 { + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX6UL_CLK_SAI1>; + clock-names = "mclk"; + ldoin-supply = <®_mba6ul_3v3>; + iov-supply = <®_mba6ul_3v3>; + }; + + jc42: temperature-sensor@19 { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x19>; + }; + + expander_out0: gpio-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + expander_in0: gpio-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander_in0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + enet1_int-hog { + gpio-hog; + gpios = <6 0>; + input; + }; + + enet2_int-hog { + gpio-hog; + gpios = <7 0>; + input; + }; + }; + + expander_out1: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + analog_touch: touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio4>; + interrupt-controller; + status = "disabled"; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ + st,ave-ctrl = <3>; /* 8 sample average control */ + st,fraction-z = <7>; /* 7 length fractional part in z */ + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + st,mod-12b = <1>; /* 12-bit ADC */ + st,ref-sel = <0>; /* internal ADC reference */ + st,sample-time = <4>; /* ADC converstion time: 80 clocks */ + st,settling = <3>; /* 1 ms panel driver settling time */ + st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */ + }; + }; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97b: eeprom@51 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>, + <&clks IMX6UL_CLK_SAI1>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <24000000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + /* for DTE mode, add below change */ + /* fsl,dte-mode; */ + /* pinctrl-0 = <&pinctrl_uart6dte>; */ + uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +/* otg-port */ +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + power-active-high; + over-current-active-low; + /* we implement only dual role but not a fully featured OTG */ + hnp-disable; + srp-disable; + adp-disable; + dr_mode = "otg"; + status = "okay"; +}; + +/* 7-port usb hub */ +/* id, pwr, oc pins not connected */ +&usbotg2 { + disable-over-current; + vbus-supply = <®_otg2vbus_5v0>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vmmc-supply = <®_mba6ul_3v3>; + vqmmc-supply = <®_vccsd>; + no-1-8-v; + no-mmc; + no-sdio; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_buttons: buttonsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x100b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x1b020 + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x1b020 + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x1b020 + MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x1b020 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b0a8 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0a0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0a0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b0a8 + >; + }; + + pinctrl_enet2_mdc: enet2mdcgrp { + fsl,pins = < + /* mdio */ + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_expander_in0: expanderin0grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x1b0b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + /* 100 k PD, DSE 120 OHM, SPPEED LO */ + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b1 + MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b1 + MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 + MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 + MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_uart6dte: uart6dte { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1 + MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x00017059 + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0001b0b0 + MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x0001b099 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x00017059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x00017059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x00017059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x00017059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x00017059 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170b9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170f9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0001b099 + >; + }; +}; -- cgit v1.2.3