From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/meson8.dtsi | 789 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 789 insertions(+) create mode 100644 arch/arm/boot/dts/meson8.dtsi (limited to 'arch/arm/boot/dts/meson8.dtsi') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi new file mode 100644 index 000000000..21eb59041 --- /dev/null +++ b/arch/arm/boot/dts/meson8.dtsi @@ -0,0 +1,789 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright 2014 Carlo Caione + */ + +#include +#include +#include +#include +#include +#include +#include +#include "meson.dtsi" + +/ { + model = "Amlogic Meson8 SoC"; + compatible = "amlogic,meson8"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x200>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu1: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x201>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu2: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x202>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu3: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x203>; + enable-method = "amlogic,meson8-smp"; + resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-96000000 { + opp-hz = /bits/ 64 <96000000>; + opp-microvolt = <825000>; + }; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + opp-microvolt = <825000>; + }; + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <825000>; + }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <825000>; + }; + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <825000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <850000>; + }; + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <850000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <875000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <925000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <975000>; + }; + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1025000>; + }; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1100000>; + }; + opp-1800000000 { + status = "disabled"; + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1125000>; + }; + opp-1992000000 { + status = "disabled"; + opp-hz = /bits/ 64 <1992000000>; + opp-microvolt = <1150000>; + }; + }; + + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + + opp-182142857 { + opp-hz = /bits/ 64 <182142857>; + opp-microvolt = <1150000>; + }; + opp-318750000 { + opp-hz = /bits/ 64 <318750000>; + opp-microvolt = <1150000>; + }; + opp-425000000 { + opp-hz = /bits/ 64 <425000000>; + opp-microvolt = <1150000>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-microvolt = <1150000>; + }; + opp-637500000 { + opp-hz = /bits/ 64 <637500000>; + opp-microvolt = <1150000>; + turbo-mode; + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* 2 MiB reserved for Hardware ROM Firmware? */ + hwrom@0 { + reg = <0x0 0x200000>; + no-map; + }; + + /* + * 1 MiB reserved for the "ARM Power Firmware": this is ARM + * code which is responsible for system suspend. It loads a + * piece of ARC code ("arc_power" in the vendor u-boot tree) + * into SRAM, executes that and shuts down the (last) ARM core. + * The arc_power firmware then checks various wakeup sources + * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or + * simply the power key) and re-starts the ARM core once it + * detects a wakeup request. + */ + power-firmware@4f00000 { + reg = <0x4f00000 0x100000>; + no-map; + }; + }; + + thermal-zones { + soc { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermal_sensor>; + + cooling-maps { + map0 { + trip = <&soc_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&soc_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + soc_passive: soc-passive { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + soc_hot: soc-hot { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + soc_critical: soc-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + }; + + mmcbus: bus@c8000000 { + compatible = "simple-bus"; + reg = <0xc8000000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000000 0x8000>; + + ddr_clkc: clock-controller@400 { + compatible = "amlogic,meson8-ddr-clkc"; + reg = <0x400 0x20>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + + dmcbus: bus@6000 { + compatible = "simple-bus"; + reg = <0x6000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x400>; + + canvas: video-lut@20 { + compatible = "amlogic,meson8-canvas", + "amlogic,canvas"; + reg = <0x20 0x14>; + }; + }; + }; + + apb: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x200000>; + + mali: gpu@c0000 { + compatible = "amlogic,meson8-mali", "arm,mali-450"; + reg = <0xc0000 0x40000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2", "pp4", "ppmmu4", + "pp5", "ppmmu5", "pp6", "ppmmu6"; + resets = <&reset RESET_MALI>; + + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + assigned-clocks = <&clkc CLKID_MALI>; + assigned-clock-rates = <318750000>; + + operating-points-v2 = <&gpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; +}; /* end of / */ + +&aiu { + compatible = "amlogic,aiu-meson8", "amlogic,aiu"; + clocks = <&clkc CLKID_AIU_GLUE>, + <&clkc CLKID_I2S_OUT>, + <&clkc CLKID_AOCLK_GATE>, + <&clkc CLKID_CTS_AMCLK>, + <&clkc CLKID_MIXER_IFACE>, + <&clkc CLKID_IEC958>, + <&clkc CLKID_IEC958_GATE>, + <&clkc CLKID_CTS_MCLK_I958>, + <&clkc CLKID_CTS_I958>; + clock-names = "pclk", + "i2s_pclk", + "i2s_aoclk", + "i2s_mclk", + "i2s_mixer", + "spdif_pclk", + "spdif_aoclk", + "spdif_mclk", + "spdif_mclk_sel"; + resets = <&reset RESET_AIU>; +}; + +&aobus { + pmu: pmu@e0 { + compatible = "amlogic,meson8-pmu", "syscon"; + reg = <0xe0 0x18>; + }; + + pinctrl_aobus: pinctrl@84 { + compatible = "amlogic,meson8-aobus-pinctrl"; + reg = <0x84 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio_ao: ao-bank@14 { + reg = <0x14 0x4>, + <0x2c 0x4>, + <0x24 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 16>; + }; + + i2s_am_clk_pins: i2s-am-clk-out { + mux { + groups = "i2s_am_clk_out_ao"; + function = "i2s_ao"; + bias-disable; + }; + }; + + i2s_out_ao_clk_pins: i2s-ao-clk-out { + mux { + groups = "i2s_ao_clk_out_ao"; + function = "i2s_ao"; + bias-disable; + }; + }; + + i2s_out_lr_clk_pins: i2s-lr-clk-out { + mux { + groups = "i2s_lr_clk_out_ao"; + function = "i2s_ao"; + bias-disable; + }; + }; + + i2s_out_ch01_ao_pins: i2s-out-ch01 { + mux { + groups = "i2s_out_ch01_ao"; + function = "i2s_ao"; + bias-disable; + }; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + bias-disable; + }; + }; + + i2c_ao_pins: i2c_mst_ao { + mux { + groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao"; + function = "i2c_mst_ao"; + bias-disable; + }; + }; + + ir_recv_pins: remote { + mux { + groups = "remote_input"; + function = "remote"; + bias-disable; + }; + }; + + pwm_f_ao_pins: pwm-f-ao { + mux { + groups = "pwm_f_ao"; + function = "pwm_f_ao"; + bias-disable; + }; + }; + }; +}; + +&ao_arc_rproc { + compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; + amlogic,secbus2 = <&secbus2>; + sram = <&ao_arc_sram>; + resets = <&reset RESET_MEDIA_CPU>; + clocks = <&clkc CLKID_AO_MEDIA_CPU>; +}; + +&cbus { + reset: reset-controller@4404 { + compatible = "amlogic,meson8b-reset"; + reg = <0x4404 0x9c>; + #reset-cells = <1>; + }; + + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; + + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; + reg = <0x86c0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + clock-measure@8758 { + compatible = "amlogic,meson8-clk-measure"; + reg = <0x8758 0x1c>; + }; + + pinctrl_cbus: pinctrl@9880 { + compatible = "amlogic,meson8-cbus-pinctrl"; + reg = <0x9880 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio: banks@80b0 { + reg = <0x80b0 0x28>, + <0x80e8 0x18>, + <0x8120 0x18>, + <0x8030 0x30>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_cbus 0 0 120>; + }; + + sd_a_pins: sd-a { + mux { + groups = "sd_d0_a", "sd_d1_a", "sd_d2_a", + "sd_d3_a", "sd_clk_a", "sd_cmd_a"; + function = "sd_a"; + bias-disable; + }; + }; + + sd_b_pins: sd-b { + mux { + groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", + "sd_d3_b", "sd_clk_b", "sd_cmd_b"; + function = "sd_b"; + bias-disable; + }; + }; + + sd_c_pins: sd-c { + mux { + groups = "sd_d0_c", "sd_d1_c", "sd_d2_c", + "sd_d3_c", "sd_clk_c", "sd_cmd_c"; + function = "sd_c"; + bias-disable; + }; + }; + + sdxc_b_pins: sdxc-b { + mux { + groups = "sdxc_d0_b", "sdxc_d13_b", + "sdxc_clk_b", "sdxc_cmd_b"; + function = "sdxc_b"; + bias-pull-up; + }; + }; + + spdif_out_pins: spdif-out { + mux { + groups = "spdif_out"; + function = "spdif"; + bias-disable; + }; + }; + + spi_nor_pins: nor { + mux { + groups = "nor_d", "nor_q", "nor_c", "nor_cs"; + function = "nor"; + bias-disable; + }; + }; + + eth_pins: ethernet { + mux { + groups = "eth_tx_clk_50m", "eth_tx_en", + "eth_txd1", "eth_txd0", + "eth_rx_clk_in", "eth_rx_dv", + "eth_rxd1", "eth_rxd0", "eth_mdio", + "eth_mdc"; + function = "ethernet"; + bias-disable; + }; + }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + bias-disable; + }; + }; + + uart_a1_pins: uart-a1 { + mux { + groups = "uart_tx_a1", + "uart_rx_a1"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_a1_cts_rts_pins: uart-a1-cts-rts { + mux { + groups = "uart_cts_a1", + "uart_rts_a1"; + function = "uart_a"; + bias-disable; + }; + }; + }; +}; + +&ahb_sram { + ao_arc_sram: ao-arc-sram@0 { + compatible = "amlogic,meson8-ao-arc-sram"; + reg = <0x0 0x8000>; + pool; + }; + + smp-sram@1ff80 { + compatible = "amlogic,meson8-smp-sram"; + reg = <0x1ff80 0x8>; + }; +}; + +&efuse { + compatible = "amlogic,meson8-efuse"; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; + + temperature_calib: calib@1f4 { + /* only the upper two bytes are relevant */ + reg = <0x1f4 0x4>; + }; +}; + +ðmac { + clocks = <&clkc CLKID_ETH>; + clock-names = "stmmaceth"; + + power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>; +}; + +&gpio_intc { + compatible = "amlogic,meson8-gpio-intc", "amlogic,meson-gpio-intc"; + status = "okay"; +}; + +&hhi { + clkc: clock-controller { + compatible = "amlogic,meson8-clkc"; + clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>; + clock-names = "xtal", "ddr_pll"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pwrc: power-controller { + compatible = "amlogic,meson8-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&pmu>; + clocks = <&clkc CLKID_VPU>; + clock-names = "vpu"; + assigned-clocks = <&clkc CLKID_VPU>; + assigned-clock-rates = <364285714>; + }; +}; + +&hwrng { + compatible = "amlogic,meson8-rng", "amlogic,meson-rng"; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + +&i2c_AO { + clocks = <&clkc CLKID_CLK81>; +}; + +&i2c_A { + clocks = <&clkc CLKID_CLK81>; +}; + +&i2c_B { + clocks = <&clkc CLKID_CLK81>; +}; + +&L2 { + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x100000 0xc0000000>; + prefetch-data = <1>; + prefetch-instr = <1>; + arm,prefetch-offset = <7>; + arm,double-linefill = <1>; + arm,prefetch-drop = <1>; + arm,shared-override; +}; + +&periph { + scu@0 { + compatible = "arm,cortex-a9-scu"; + reg = <0x0 0x100>; + }; + + timer@200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x200 0x20>; + interrupts = ; + clocks = <&clkc CLKID_PERIPH>; + + /* + * the arm_global_timer driver currently does not handle clock + * rate changes. Keep it disabled for now. + */ + status = "disabled"; + }; + + timer@600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x600 0x20>; + interrupts = ; + clocks = <&clkc CLKID_PERIPH>; + }; +}; + +&pwm_ab { + compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; +}; + +&pwm_cd { + compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; +}; + +&rtc { + compatible = "amlogic,meson8-rtc"; + resets = <&reset RESET_RTC>; +}; + +&saradc { + compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc"; + clocks = <&xtal>, <&clkc CLKID_SAR_ADC>; + clock-names = "clkin", "core"; + amlogic,hhi-sysctrl = <&hhi>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; +}; + +&sdhc { + compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc"; + clocks = <&xtal>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV5>, + <&clkc CLKID_SDHC>; + clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk"; +}; + +&secbus { + secbus2: system-controller@4000 { + compatible = "amlogic,meson8-secbus2", "syscon"; + reg = <0x4000 0x2000>; + }; +}; + +&sdio { + compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; +}; + +&spifc { + clocks = <&clkc CLKID_CLK81>; +}; + +&timer_abcde { + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk"; +}; + +&uart_AO { + compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart"; + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_A { + compatible = "amlogic,meson8-uart"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + compatible = "amlogic,meson8-uart"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_C { + compatible = "amlogic,meson8-uart"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&usb0 { + compatible = "amlogic,meson8-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb1 { + compatible = "amlogic,meson8-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb0_phy { + compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; +}; + +&usb1_phy { + compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; +}; -- cgit v1.2.3