From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/qcom-sdx55.dtsi | 785 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 785 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-sdx55.dtsi (limited to 'arch/arm/boot/dts/qcom-sdx55.dtsi') diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi new file mode 100644 index 000000000..df7303c5c --- /dev/null +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -0,0 +1,785 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SDX55 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>; + interrupt-parent = <&intc>; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + + nand_clk_dummy: nand-clk-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + enable-method = "psci"; + clocks = <&apcs>; + power-domains = <&rpmhpd SDX55_CX>; + power-domain-names = "rpmhpd"; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdx55", "qcom,scm"; + }; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-345600000 { + opp-hz = /bits/ 64 <345600000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + hyp_mem: memory@8fc00000 { + no-map; + reg = <0x8fc00000 0x80000>; + }; + + ac_db_mem: memory@8fc80000 { + no-map; + reg = <0x8fc80000 0x40000>; + }; + + secdata_mem: memory@8fcfd000 { + no-map; + reg = <0x8fcfd000 0x1000>; + }; + + sbl_mem: memory@8fd00000 { + no-map; + reg = <0x8fd00000 0x100000>; + }; + + aop_image: memory@8fe00000 { + no-map; + reg = <0x8fe00000 0x20000>; + }; + + aop_cmd_db: memory@8fe20000 { + compatible = "qcom,cmd-db"; + reg = <0x8fe20000 0x20000>; + no-map; + }; + + smem_mem: memory@8fe40000 { + no-map; + reg = <0x8fe40000 0xc0000>; + }; + + tz_mem: memory@8ff00000 { + no-map; + reg = <0x8ff00000 0x100000>; + }; + + tz_apps_mem: memory@90000000 { + no-map; + reg = <0x90000000 0x500000>; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = ; + mboxes = <&apcs 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdx55"; + reg = <0x100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + blsp1_uart3: serial@831000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x00831000 0x200>; + interrupts = ; + clocks = <&gcc 30>, + <&gcc 9>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + usb_hsphy: phy@ff4000 { + compatible = "qcom,sdx55-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0x00ff4000 0x114>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_BCR>; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx55-qmp-usb3-uni-phy"; + reg = <0x00ff6000 0x1c0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3PHY_PHY_BCR>, + <&gcc GCC_USB3_PHY_BCR>; + reset-names = "phy", "common"; + + usb_ssphy: phy@ff6200 { + reg = <0x00ff6200 0x170>, + <0x00ff6400 0x200>, + <0x00ff6800 0x800>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + mc_virt: interconnect@1100000 { + compatible = "qcom,sdx55-mc-virt"; + reg = <0x01100000 0x400000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mem_noc: interconnect@9680000 { + compatible = "qcom,sdx55-mem-noc"; + reg = <0x09680000 0x40000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@162c000 { + compatible = "qcom,sdx55-system-noc"; + reg = <0x0162c000 0x31200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qpic_bam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x01b04000 0x1c000>; + interrupts = ; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + status = "disabled"; + }; + + qpic_nand: nand-controller@1b30000 { + compatible = "qcom,sdx55-nand"; + reg = <0x01b30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&rpmhcc RPMH_QPIC_CLK>, + <&nand_clk_dummy>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + }; + + pcie0_phy: phy@1c07000 { + compatible = "qcom,sdx55-qmp-pcie-phy"; + reg = <0x01c07000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE_RCHNG_PHY_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: lanes@1c06000 { + reg = <0x01c06000 0x104>, /* tx0 */ + <0x01c06200 0x328>, /* rx0 */ + <0x01c07200 0x1e8>, /* pcs */ + <0x01c06800 0x104>, /* tx1 */ + <0x01c06a00 0x328>, /* rx1 */ + <0x01c07600 0x800>; /* pcs_misc */ + clocks = <&gcc GCC_PCIE_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_pipe_clk"; + }; + }; + + ipa: ipa@1e40000 { + compatible = "qcom,sdx55-ipa"; + + iommus = <&apps_smmu 0x5e0 0x0>, + <&apps_smmu 0x5e2 0x0>; + reg = <0x1e40000 0x7000>, + <0x1e50000 0x4b20>, + <0x1e04000 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>, + <&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>, + <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1fcb000 { + compatible = "syscon"; + reg = <0x01fc0000 0x1000>; + }; + + sdhc_1: mmc@8804000 { + compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x08804000 0x1000>; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>; + clock-names = "iface", "core"; + status = "disabled"; + }; + + pcie_ep: pcie-ep@40000000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40200000 0x100000>, + <0x01c03000 0x3000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", "cfg", "bus_master", "bus_slave", + "slave_q2a", "sleep", "ref"; + + interrupts = , + ; + interrupt-names = "global", "doorbell"; + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie0_lane>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + + status = "disabled"; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sdx55-mpss-pas"; + reg = <0x04080000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SDX55_CX>, + <&rpmhpd SDX55_MSS>; + power-domain-names = "cx", "mss"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs 15>; + }; + }; + + usb: usb@a6f8800 { + compatible = "qcom,sdx55-dwc3", "qcom,dwc3"; + reg = <0x0a6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts = , + , + , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + usb_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x1a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, <&usb_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b210000 { + compatible = "qcom,sdx55-pdc", "qcom,pdc"; + reg = <0x0b210000 0x30000>; + qcom,pdc-ranges = <0 179 52>; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + restart@c264000 { + compatible = "qcom,pshold"; + reg = <0x0c264000 0x1000>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0c440000 0x0000d00>, + <0x0c600000 0x2000000>, + <0x0e600000 0x0100000>, + <0x0e700000 0x00a0000>, + <0x0c40a000 0x0000700>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx55-pinctrl"; + reg = <0xf100000 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 108>; + }; + + sram@1468f000 { + compatible = "qcom,sdx55-imem", "syscon", "simple-mfd"; + reg = <0x1468f000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x1468f000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0x200>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17800000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + interrupt-parent = <&intc>; + #interrupt-cells = <3>; + reg = <0x17800000 0x1000>, + <0x17802000 0x1000>; + }; + + a7pll: clock@17808000 { + compatible = "qcom,sdx55-a7pll"; + reg = <0x17808000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <0>; + }; + + apcs: mailbox@17810000 { + compatible = "qcom,sdx55-apcs-gcc", "syscon"; + reg = <0x17810000 0x2000>; + #mbox-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>; + clock-names = "ref", "pll", "aux"; + #clock-cells = <0>; + }; + + watchdog@17817000 { + compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt"; + reg = <0x17817000 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@17820000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17820000 0x1000>; + clock-frequency = <19200000>; + + frame@17821000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17821000 0x1000>, + <0x17822000 0x1000>; + }; + + frame@17823000 { + frame-number = <1>; + interrupts = ; + reg = <0x17823000 0x1000>; + status = "disabled"; + }; + + frame@17824000 { + frame-number = <2>; + interrupts = ; + reg = <0x17824000 0x1000>; + status = "disabled"; + }; + + frame@17825000 { + frame-number = <3>; + interrupts = ; + reg = <0x17825000 0x1000>; + status = "disabled"; + }; + + frame@17826000 { + frame-number = <4>; + interrupts = ; + reg = <0x17826000 0x1000>; + status = "disabled"; + }; + + frame@17827000 { + frame-number = <5>; + interrupts = ; + reg = <0x17827000 0x1000>; + status = "disabled"; + }; + + frame@17828000 { + frame-number = <6>; + interrupts = ; + reg = <0x17828000 0x1000>; + status = "disabled"; + }; + + frame@17829000 { + frame-number = <7>; + interrupts = ; + reg = <0x17829000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17840000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x17830000 0x10000>, <0x17840000 0x10000>; + reg-names = "drv-0", "drv-1"; + interrupts = , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <1>; + qcom,tcs-config = , , + , ; + + rpmhcc: clock-controller { + compatible = "qcom,sdx55-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sdx55-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <19200000>; + }; +}; -- cgit v1.2.3