From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/r8a7779.dtsi | 652 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 652 insertions(+) create mode 100644 arch/arm/boot/dts/r8a7779.dtsi (limited to 'arch/arm/boot/dts/r8a7779.dtsi') diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi new file mode 100644 index 000000000..39fc58f32 --- /dev/null +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -0,0 +1,652 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the R-Car H1 (R8A77790) SoC + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + */ + +#include +#include +#include +#include + +/ { + compatible = "renesas,r8a7779"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; + power-domains = <&sysc R8A7779_PD_ARM1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; + power-domains = <&sysc R8A7779_PD_ARM2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7779_CLK_Z>; + power-domains = <&sysc R8A7779_PD_ARM3>; + }; + }; + + aliases { + spi0 = &hspi0; + spi1 = &hspi1; + spi2 = &hspi2; + }; + + gic: interrupt-controller@f0001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xf0001000 0x1000>, + <0xf0000100 0x100>; + }; + + timer@f0000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xf0000200 0x100>; + interrupts = ; + clocks = <&cpg_clocks R8A7779_CLK_ZS>; + }; + + timer@f0000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xf0000600 0x20>; + interrupts = ; + clocks = <&cpg_clocks R8A7779_CLK_ZS>; + }; + + gpio0: gpio@ffc40000 { + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; + reg = <0xffc40000 0x2c>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio1: gpio@ffc41000 { + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; + reg = <0xffc41000 0x2c>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@ffc42000 { + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; + reg = <0xffc42000 0x2c>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@ffc43000 { + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; + reg = <0xffc43000 0x2c>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@ffc44000 { + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; + reg = <0xffc44000 0x2c>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio5: gpio@ffc45000 { + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; + reg = <0xffc45000 0x2c>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio6: gpio@ffc46000 { + compatible = "renesas,gpio-r8a7779", "renesas,rcar-gen1-gpio"; + reg = <0xffc46000 0x2c>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 9>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + irqpin0: interrupt-controller@fe78001c { + compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin"; + #interrupt-cells = <2>; + status = "disabled"; + interrupt-controller; + reg = <0xfe78001c 4>, + <0xfe780010 4>, + <0xfe780024 4>, + <0xfe780044 4>, + <0xfe780064 4>, + <0xfe780000 4>; + interrupts = , + , + , + ; + sense-bitfield-width = <2>; + }; + + i2c0: i2c@ffc70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; + reg = <0xffc70000 0x1000>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_I2C0>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + i2c1: i2c@ffc71000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; + reg = <0xffc71000 0x1000>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_I2C1>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <5>; + status = "disabled"; + }; + + i2c2: i2c@ffc72000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; + reg = <0xffc72000 0x1000>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_I2C2>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <5>; + status = "disabled"; + }; + + i2c3: i2c@ffc73000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7779", "renesas,rcar-gen1-i2c"; + reg = <0xffc73000 0x1000>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_I2C3>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + i2c-scl-internal-delay-ns = <5>; + status = "disabled"; + }; + + scif0: serial@ffe40000 { + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; + reg = <0xffe40000 0x100>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_SCIF0>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif1: serial@ffe41000 { + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; + reg = <0xffe41000 0x100>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_SCIF1>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif2: serial@ffe42000 { + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; + reg = <0xffe42000 0x100>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_SCIF2>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif3: serial@ffe43000 { + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; + reg = <0xffe43000 0x100>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_SCIF3>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif4: serial@ffe44000 { + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; + reg = <0xffe44000 0x100>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_SCIF4>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif5: serial@ffe45000 { + compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif", + "renesas,scif"; + reg = <0xffe45000 0x100>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_SCIF5>, + <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif0: serial@ffe48000 { + compatible = "renesas,hscif-r8a7779", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe48000 96>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_HSCIF0>, + <&cpg_clocks R8A7779_CLK_S>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif1: serial@ffe49000 { + compatible = "renesas,hscif-r8a7779", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe49000 96>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_HSCIF1>, + <&cpg_clocks R8A7779_CLK_S>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pfc: pinctrl@fffc0000 { + compatible = "renesas,pfc-r8a7779"; + reg = <0xfffc0000 0x23c>; + }; + + thermal@ffc48000 { + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; + reg = <0xffc48000 0x38>; + }; + + tmu0: timer@ffd80000 { + compatible = "renesas,tmu-r8a7779", "renesas,tmu"; + reg = <0xffd80000 0x30>; + interrupts = , + , + ; + clocks = <&mstp0_clks R8A7779_CLK_TMU0>; + clock-names = "fck"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + tmu1: timer@ffd81000 { + compatible = "renesas,tmu-r8a7779", "renesas,tmu"; + reg = <0xffd81000 0x30>; + interrupts = , + , + ; + clocks = <&mstp0_clks R8A7779_CLK_TMU1>; + clock-names = "fck"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + tmu2: timer@ffd82000 { + compatible = "renesas,tmu-r8a7779", "renesas,tmu"; + reg = <0xffd82000 0x30>; + interrupts = , + , + ; + clocks = <&mstp0_clks R8A7779_CLK_TMU2>; + clock-names = "fck"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + + #renesas,channels = <3>; + + status = "disabled"; + }; + + sata: sata@fc600000 { + compatible = "renesas,sata-r8a7779"; + reg = <0xfc600000 0x200000>; + interrupts = ; + clocks = <&mstp1_clks R8A7779_CLK_SATA>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + sdhi0: mmc@ffe4c000 { + compatible = "renesas,sdhi-r8a7779", + "renesas,rcar-gen1-sdhi"; + reg = <0xffe4c000 0x100>; + interrupts = ; + clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + sdhi1: mmc@ffe4d000 { + compatible = "renesas,sdhi-r8a7779", + "renesas,rcar-gen1-sdhi"; + reg = <0xffe4d000 0x100>; + interrupts = ; + clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + sdhi2: mmc@ffe4e000 { + compatible = "renesas,sdhi-r8a7779", + "renesas,rcar-gen1-sdhi"; + reg = <0xffe4e000 0x100>; + interrupts = ; + clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + sdhi3: mmc@ffe4f000 { + compatible = "renesas,sdhi-r8a7779", + "renesas,rcar-gen1-sdhi"; + reg = <0xffe4f000 0x100>; + interrupts = ; + clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hspi0: spi@fffc7000 { + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; + reg = <0xfffc7000 0x18>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hspi1: spi@fffc8000 { + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; + reg = <0xfffc8000 0x18>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hspi2: spi@fffc6000 { + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; + reg = <0xfffc6000 0x18>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + }; + + du: display@fff80000 { + compatible = "renesas,du-r8a7779"; + reg = <0xfff80000 0x40000>; + interrupts = ; + clocks = <&mstp1_clks R8A7779_CLK_DU>; + clock-names = "du.0"; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb0: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_rgb1: endpoint { + }; + }; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* Special CPG clocks */ + cpg_clocks: clocks@ffc80000 { + compatible = "renesas,r8a7779-cpg-clocks"; + reg = <0xffc80000 0x30>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "plla", "z", "zs", "s", + "s1", "p", "b", "out"; + #power-domain-cells = <0>; + }; + + /* Fixed factor clocks */ + i_clk: i { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + s3_clk: s3 { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + }; + s4_clk: s4 { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <16>; + clock-mult = <1>; + }; + g_clk: g { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + }; + + /* Gate clocks */ + mstp0_clks: clocks@ffc80030 { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc80030 4>; + clocks = <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>; + #clock-cells = <1>; + clock-indices = < + R8A7779_CLK_HSPI R8A7779_CLK_TMU2 + R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 + R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 + R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 + R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 + R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0 + R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 + R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 + >; + clock-output-names = + "hspi", "tmu2", "tmu1", "tmu0", "hscif1", + "hscif0", "scif5", "scif4", "scif3", "scif2", + "scif1", "scif0", "i2c3", "i2c2", "i2c1", + "i2c0"; + }; + mstp1_clks: clocks@ffc80034 { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc80034 4>, <0xffc80044 4>; + clocks = <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>; + #clock-cells = <1>; + clock-indices = < + R8A7779_CLK_USB01 R8A7779_CLK_USB2 + R8A7779_CLK_DU R8A7779_CLK_VIN2 + R8A7779_CLK_VIN1 R8A7779_CLK_VIN0 + R8A7779_CLK_ETHER R8A7779_CLK_SATA + R8A7779_CLK_PCIE R8A7779_CLK_VIN3 + >; + clock-output-names = + "usb01", "usb2", + "du", "vin2", + "vin1", "vin0", + "ether", "sata", + "pcie", "vin3"; + }; + mstp3_clks: clocks@ffc8003c { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc8003c 4>; + clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, + <&s4_clk>, <&s4_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2 + R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0 + R8A7779_CLK_MMC1 R8A7779_CLK_MMC0 + >; + clock-output-names = + "sdhi3", "sdhi2", "sdhi1", "sdhi0", + "mmc1", "mmc0"; + }; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0xff000044 4>; + }; + + rst: reset-controller@ffcc0000 { + compatible = "renesas,r8a7779-reset-wdt"; + reg = <0xffcc0000 0x48>; + }; + + sysc: system-controller@ffd85000 { + compatible = "renesas,r8a7779-sysc"; + reg = <0xffd85000 0x0200>; + #power-domain-cells = <1>; + }; +}; -- cgit v1.2.3