From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/rv1108.dtsi | 986 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 986 insertions(+) create mode 100644 arch/arm/boot/dts/rv1108.dtsi (limited to 'arch/arm/boot/dts/rv1108.dtsi') diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi new file mode 100644 index 000000000..abf3006f0 --- /dev/null +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -0,0 +1,986 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include +#include +#include +#include +#include +#include +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "rockchip,rv1108"; + + interrupt-parent = <&gic>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; /* min followed by max */ + dynamic-power-coefficient = <75>; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + cpu_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <975000>; + clock-latency-ns = <40000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <975000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1150000>; + clock-latency-ns = <40000>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = ; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + ; + arm,cpu-registers-not-fw-configured; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + bus_intmem: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x2000>; + }; + + uart2: serial@10210000 { + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; + reg = <0x10210000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 6>, <&pdma 7>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart1: serial@10220000 { + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; + reg = <0x10220000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 4>, <&pdma 5>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart0: serial@10230000 { + compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; + reg = <0x10230000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 2>, <&pdma 3>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + i2c1: i2c@10240000 { + compatible = "rockchip,rv1108-i2c"; + reg = <0x10240000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + i2c2: i2c@10250000 { + compatible = "rockchip,rv1108-i2c"; + reg = <0x10250000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + i2c3: i2c@10260000 { + compatible = "rockchip,rv1108-i2c"; + reg = <0x10260000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + spi: spi@10270000 { + compatible = "rockchip,rv1108-spi"; + reg = <0x10270000 0x1000>; + interrupts = ; + clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&pdma 8>, <&pdma 9>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm4: pwm@10280000 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x10280000 0x10>; + interrupts = ; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@10280010 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x10280010 0x10>; + interrupts = ; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@10280020 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x10280020 0x10>; + interrupts = ; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@10280030 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x10280030 0x10>; + interrupts = ; + clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pdma: dma-controller@102a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x102a0000 0x4000>; + interrupts = ; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + + grf: syscon@10300000 { + compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd"; + reg = <0x10300000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + io_domains: io-domains { + compatible = "rockchip,rv1108-io-voltage-domain"; + status = "disabled"; + }; + + u2phy: usb2phy@100 { + compatible = "rockchip,rv1108-usb2phy"; + reg = <0x100 0x0c>; + clocks = <&cru SCLK_USBPHY>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "usbphy"; + rockchip,usbgrf = <&usbgrf>; + status = "disabled"; + + u2phy_otg: otg-port { + interrupts = ; + interrupt-names = "otg-mux"; + #phy-cells = <0>; + status = "disabled"; + }; + + u2phy_host: host-port { + interrupts = ; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + timer: timer@10350000 { + compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer"; + reg = <0x10350000 0x20>; + interrupts = ; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; + }; + + watchdog: watchdog@10360000 { + compatible = "rockchip,rv1108-wdt", "snps,dw-wdt"; + reg = <0x10360000 0x100>; + interrupts = ; + clocks = <&cru PCLK_WDT>; + status = "disabled"; + }; + + thermal-zones { + soc_thermal: soc-thermal { + polling-delay-passive = <20>; + polling-delay = <1000>; + sustainable-power = <50>; + thermal-sensors = <&tsadc 0>; + + trips { + threshold: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + target: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + soc_crit: soc-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + }; + }; + }; + + tsadc: tsadc@10370000 { + compatible = "rockchip,rv1108-tsadc"; + reg = <0x10370000 0x100>; + interrupts = ; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <750000>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_pin>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_pin>; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + rockchip,hw-tshut-temp = <120000>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + adc: adc@1038c000 { + compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc"; + reg = <0x1038c000 0x100>; + interrupts = ; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + status = "disabled"; + }; + + i2c0: i2c@20000000 { + compatible = "rockchip,rv1108-i2c"; + reg = <0x20000000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C0_PMU>, <&cru PCLK_I2C0_PMU>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + pwm0: pwm@20040000 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x20040000 0x10>; + interrupts = ; + clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@20040010 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x20040010 0x10>; + interrupts = ; + clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@20040020 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x20040020 0x10>; + interrupts = ; + clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@20040030 { + compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; + reg = <0x20040030 0x10>; + interrupts = ; + clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmugrf: syscon@20060000 { + compatible = "rockchip,rv1108-pmugrf", "syscon", "simple-mfd"; + reg = <0x20060000 0x1000>; + + pmu_io_domains: io-domains { + compatible = "rockchip,rv1108-pmu-io-voltage-domain"; + status = "disabled"; + }; + }; + + usbgrf: syscon@202a0000 { + compatible = "rockchip,rv1108-usbgrf", "syscon"; + reg = <0x202a0000 0x1000>; + }; + + cru: clock-controller@20200000 { + compatible = "rockchip,rv1108-cru"; + reg = <0x20200000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + nfc: nand-controller@30100000 { + compatible = "rockchip,rv1108-nfc"; + reg = <0x30100000 0x1000>; + interrupts = ; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + assigned-clocks = <&cru SCLK_NANDC>; + assigned-clock-rates = <150000000>; + status = "disabled"; + }; + + emmc: mmc@30110000 { + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x30110000 0x4000>; + interrupts = ; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + status = "disabled"; + }; + + sdio: mmc@30120000 { + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x30120000 0x4000>; + interrupts = ; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + status = "disabled"; + }; + + sdmmc: mmc@30130000 { + compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x30130000 0x4000>; + interrupts = ; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <100000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "disabled"; + }; + + usb_host_ehci: usb@30140000 { + compatible = "generic-ehci"; + reg = <0x30140000 0x20000>; + interrupts = ; + clocks = <&cru HCLK_HOST0>, <&u2phy>; + phys = <&u2phy_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host_ohci: usb@30160000 { + compatible = "generic-ohci"; + reg = <0x30160000 0x20000>; + interrupts = ; + clocks = <&cru HCLK_HOST0>, <&u2phy>; + phys = <&u2phy_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_otg: usb@30180000 { + compatible = "rockchip,rv1108-usb", "rockchip,rk3066-usb", + "snps,dwc2"; + reg = <0x30180000 0x40000>; + interrupts = ; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; + phys = <&u2phy_otg>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + sfc: spi@301c0000 { + compatible = "rockchip,sfc"; + reg = <0x301c0000 0x4000>; + interrupts = ; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>; + pinctrl-names = "default"; + status = "disabled"; + }; + + gmac: ethernet@30200000 { + compatible = "rockchip,rv1108-gmac"; + reg = <0x30200000 0x10000>; + interrupts = , + ; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_RX>, + <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + /* rv1108 only supports an rmii interface */ + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + gic: interrupt-controller@32010000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x32011000 0x1000>, + <0x32012000 0x2000>, + <0x32014000 0x2000>, + <0x32016000 0x2000>; + interrupts = ; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rv1108-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio@20030000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20030000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO0_PMU>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@10310000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10310000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@10320000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10320000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO2>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@10330000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10330000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO3>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma { + drive-strength = <12>; + }; + + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma { + drive-strength = <4>; + }; + + pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + emmc { + emmc_bus8: emmc-bus8 { + rockchip,pins = <2 RK_PA0 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA1 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA2 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA3 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA4 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA5 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA6 2 &pcfg_pull_up_drv_8ma>, + <2 RK_PA7 2 &pcfg_pull_up_drv_8ma>; + }; + + emmc_clk: emmc-clk { + rockchip,pins = <2 RK_PB6 1 &pcfg_pull_none_drv_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <2 RK_PB4 2 &pcfg_pull_up_drv_8ma>; + }; + }; + + sfc { + sfc_bus4: sfc-bus4 { + rockchip,pins = + <2 RK_PA0 3 &pcfg_pull_none>, + <2 RK_PA1 3 &pcfg_pull_none>, + <2 RK_PA2 3 &pcfg_pull_none>, + <2 RK_PA3 3 &pcfg_pull_none>; + }; + + sfc_bus2: sfc-bus2 { + rockchip,pins = + <2 RK_PA0 3 &pcfg_pull_none>, + <2 RK_PA1 3 &pcfg_pull_none>; + }; + + sfc_cs0: sfc-cs0 { + rockchip,pins = + <2 RK_PB4 3 &pcfg_pull_none>; + }; + + sfc_clk: sfc-clk { + rockchip,pins = + <2 RK_PB7 2 &pcfg_pull_none>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>, + <1 RK_PC3 2 &pcfg_pull_none>, + <1 RK_PC4 2 &pcfg_pull_none>, + <1 RK_PB2 3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB3 3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB4 3 &pcfg_pull_none_drv_12ma>, + <1 RK_PB5 3 &pcfg_pull_none>, + <1 RK_PB6 3 &pcfg_pull_none>, + <1 RK_PB7 3 &pcfg_pull_none>, + <1 RK_PC2 3 &pcfg_pull_none>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none_smt>, + <0 RK_PB2 1 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <2 RK_PD3 1 &pcfg_pull_up>, + <2 RK_PD4 1 &pcfg_pull_up>; + }; + }; + + i2c2m1 { + i2c2m1_xfer: i2c2m1-xfer { + rockchip,pins = <0 RK_PC2 2 &pcfg_pull_none>, + <0 RK_PC6 3 &pcfg_pull_none>; + }; + + i2c2m1_pins: i2c2m1-pins { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + i2c2m05v { + i2c2m05v_xfer: i2c2m05v-xfer { + rockchip,pins = <1 RK_PD5 2 &pcfg_pull_none>, + <1 RK_PD4 2 &pcfg_pull_none>; + }; + + i2c2m05v_pins: i2c2m05v-pins { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, + <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 RK_PB6 1 &pcfg_pull_none>, + <0 RK_PC4 2 &pcfg_pull_none>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <0 RK_PC5 1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <0 RK_PC6 1 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <0 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + pwm4 { + pwm4_pin: pwm4-pin { + rockchip,pins = <1 RK_PC1 3 &pcfg_pull_none>; + }; + }; + + pwm5 { + pwm5_pin: pwm5-pin { + rockchip,pins = <1 RK_PA7 2 &pcfg_pull_none>; + }; + }; + + pwm6 { + pwm6_pin: pwm6-pin { + rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>; + }; + }; + + pwm7 { + pwm7_pin: pwm7-pin { + rockchip,pins = <1 RK_PB1 2 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <3 RK_PC4 1 &pcfg_pull_none_drv_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <3 RK_PC5 1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_cd: sdmmc-cd { + rockchip,pins = <0 RK_PA1 1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <3 RK_PC3 1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC2 1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC1 1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC0 1 &pcfg_pull_up_drv_4ma>; + }; + }; + + spim0 { + spim0_clk: spim0-clk { + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_up>; + }; + + spim0_cs0: spim0-cs0 { + rockchip,pins = <1 RK_PD1 2 &pcfg_pull_up>; + }; + + spim0_tx: spim0-tx { + rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>; + }; + + spim0_rx: spim0-rx { + rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>; + }; + }; + + spim1 { + spim1_clk: spim1-clk { + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_up>; + }; + + spim1_cs0: spim1-cs0 { + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_up>; + }; + + spim1_rx: spim1-rx { + rockchip,pins = <0 RK_PB0 1 &pcfg_pull_up>; + }; + + spim1_tx: spim1-tx { + rockchip,pins = <0 RK_PA7 1 &pcfg_pull_up>; + }; + }; + + tsadc { + otp_out: otp-out { + rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>; + }; + + otp_pin: otp-pin { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>, + <3 RK_PA5 1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <3 RK_PA4 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>; + }; + + uart0_rts_pin: uart0-rts-pin { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <1 RK_PD3 1 &pcfg_pull_up>, + <1 RK_PD2 1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>; + }; + }; + + uart2m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = <2 RK_PD2 1 &pcfg_pull_up>, + <2 RK_PD1 1 &pcfg_pull_none>; + }; + }; + + uart2m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up>, + <3 RK_PC2 2 &pcfg_pull_none>; + }; + }; + + uart2_5v { + uart2_5v_cts: uart2_5v-cts { + rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>; + }; + + uart2_5v_rts: uart2_5v-rts { + rockchip,pins = <1 RK_PD5 1 &pcfg_pull_none>; + }; + }; + }; +}; -- cgit v1.2.3