From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/boot/dts/s5pv210.dtsi | 634 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 634 insertions(+) create mode 100644 arch/arm/boot/dts/s5pv210.dtsi (limited to 'arch/arm/boot/dts/s5pv210.dtsi') diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi new file mode 100644 index 000000000..12e90a1cc --- /dev/null +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -0,0 +1,634 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk + * Tomasz Figa + * + * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional + * nodes can be added to this file. + */ + +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + csis0 = &csis0; + dmc0 = &dmc0; + dmc1 = &dmc1; + fimc0 = &fimc0; + fimc1 = &fimc1; + fimc2 = &fimc2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2s0 = &i2s0; + i2s1 = &i2s1; + i2s2 = &i2s2; + pinctrl0 = &pinctrl0; + spi0 = &spi0; + spi1 = &spi1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + }; + }; + + xxti: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "xxti"; + #clock-cells = <0>; + }; + + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "xusbxti"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + onenand: onenand@b0600000 { + compatible = "samsung,s5pv210-onenand"; + reg = <0xb0600000 0x2000>, + <0xb0000000 0x20000>, + <0xb0040000 0x20000>; + interrupt-parent = <&vic1>; + interrupts = <31>; + clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>; + clock-names = "bus", "onenand"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + chipid@e0000000 { + compatible = "samsung,s5pv210-chipid"; + reg = <0xe0000000 0x1000>; + }; + + clocks: clock-controller@e0100000 { + compatible = "samsung,s5pv210-clock"; + reg = <0xe0100000 0x10000>; + clock-names = "xxti", "xusbxti"; + clocks = <&xxti>, <&xusbxti>; + #clock-cells = <1>; + }; + + pmu_syscon: syscon@e0108000 { + compatible = "samsung-s5pv210-pmu", "syscon"; + reg = <0xe0108000 0x8000>; + }; + + pinctrl0: pinctrl@e0200000 { + compatible = "samsung,s5pv210-pinctrl"; + reg = <0xe0200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <30>; + + wakeup-interrupt-controller { + compatible = "samsung,s5pv210-wakeup-eint"; + interrupts = <16>; + interrupt-parent = <&vic0>; + }; + }; + + pdma0: dma-controller@e0900000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0900000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <19>; + clocks = <&clocks CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + pdma1: dma-controller@e0a00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0a00000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <20>; + clocks = <&clocks CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + adc: adc@e1700000 { + compatible = "samsung,s5pv210-adc"; + reg = <0xe1700000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <23>, <24>; + clocks = <&clocks CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + spi0: spi@e1300000 { + compatible = "samsung,s5pv210-spi"; + reg = <0xe1300000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <15>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@e1400000 { + compatible = "samsung,s5pv210-spi"; + reg = <0xe1400000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <16>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + keypad: keypad@e1600000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0xe1600000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <25>; + clocks = <&clocks CLK_KEYIF>; + clock-names = "keypad"; + status = "disabled"; + }; + + i2c0: i2c@e1800000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <14>; + clocks = <&clocks CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e1a00000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xe1a00000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <19>; + clocks = <&clocks CLK_I2C2>; + clock-names = "i2c"; + pinctrl-0 = <&i2c2_bus>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + clk_audss: clock-controller@eee10000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xeee10000 0x1000>; + clock-names = "hclk", "xxti", + "fout_epll", + "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, + <&clocks FOUT_EPLL>, + <&clocks SCLK_AUDIO0>; + #clock-cells = <1>; + }; + + i2s0: i2s@eee30000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0xeee30000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <16>; + dma-names = "tx", "rx", "tx-sec"; + dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>; + clock-names = "iis", + "i2s_opclk0", + "i2s_opclk1"; + clocks = <&clk_audss CLK_I2S>, + <&clk_audss CLK_I2S>, + <&clk_audss CLK_DOUT_AUD_BUS>; + samsung,idma-addr = <0xc0010000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1: i2s@e2100000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0xe2100000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <17>; + dma-names = "tx", "rx"; + dmas = <&pdma1 13>, <&pdma1 12>; + clock-names = "iis", "i2s_opclk0"; + clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2: i2s@e2a00000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0xe2a00000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <18>; + dma-names = "tx", "rx"; + dmas = <&pdma1 15>, <&pdma1 14>; + clock-names = "iis", "i2s_opclk0"; + clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + pwm: pwm@e2500000 { + compatible = "samsung,s5pc100-pwm"; + reg = <0xe2500000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <21>, <22>, <23>, <24>, <25>; + clock-names = "timers"; + clocks = <&clocks CLK_PWM>; + #pwm-cells = <3>; + }; + + watchdog: watchdog@e2700000 { + compatible = "samsung,s3c6410-wdt"; + reg = <0xe2700000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <26>; + clock-names = "watchdog"; + clocks = <&clocks CLK_WDT>; + }; + + rtc: rtc@e2800000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0xe2800000 0x100>; + interrupt-parent = <&vic0>; + interrupts = <28>, <29>; + clocks = <&clocks CLK_RTC>; + clock-names = "rtc"; + status = "disabled"; + }; + + uart0: serial@e2900000 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900000 0x400>; + interrupt-parent = <&vic1>; + interrupts = <10>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>, + <&clocks SCLK_UART0>; + status = "disabled"; + }; + + uart1: serial@e2900400 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900400 0x400>; + interrupt-parent = <&vic1>; + interrupts = <11>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>, + <&clocks SCLK_UART1>; + status = "disabled"; + }; + + uart2: serial@e2900800 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900800 0x400>; + interrupt-parent = <&vic1>; + interrupts = <12>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>, + <&clocks SCLK_UART2>; + status = "disabled"; + }; + + uart3: serial@e2900c00 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900c00 0x400>; + interrupt-parent = <&vic1>; + interrupts = <13>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>, + <&clocks SCLK_UART3>; + status = "disabled"; + }; + + sdhci0: mmc@eb000000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb000000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <26>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>, + <&clocks SCLK_MMC0>; + status = "disabled"; + }; + + sdhci1: mmc@eb100000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb100000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <27>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>, + <&clocks SCLK_MMC1>; + status = "disabled"; + }; + + sdhci2: mmc@eb200000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb200000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <28>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>, + <&clocks SCLK_MMC2>; + status = "disabled"; + }; + + sdhci3: mmc@eb300000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb300000 0x100000>; + interrupt-parent = <&vic3>; + interrupts = <2>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3"; + clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>, + <&clocks SCLK_MMC3>; + status = "disabled"; + }; + + hsotg: hsotg@ec000000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0xec000000 0x20000>; + interrupt-parent = <&vic1>; + interrupts = <24>; + clocks = <&clocks CLK_USB_OTG>; + clock-names = "otg"; + phy-names = "usb2-phy"; + phys = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: usbphy@ec100000 { + compatible = "samsung,s5pv210-usb2-phy"; + reg = <0xec100000 0x100>; + samsung,pmureg-phandle = <&pmu_syscon>; + clocks = <&clocks CLK_USB_OTG>, <&xusbxti>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + + ehci: usb@ec200000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0xec200000 0x100>; + interrupts = <23>; + interrupt-parent = <&vic1>; + clocks = <&clocks CLK_USB_HOST>; + clock-names = "usbhost"; + phys = <&usbphy 1>; + phy-names = "host"; + status = "disabled"; + }; + + ohci: usb@ec300000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0xec300000 0x100>; + interrupts = <23>; + interrupt-parent = <&vic1>; + clocks = <&clocks CLK_USB_HOST>; + clock-names = "usbhost"; + phys = <&usbphy 1>; + phy-names = "host"; + status = "disabled"; + }; + + mfc: codec@f1700000 { + compatible = "samsung,mfc-v5"; + reg = <0xf1700000 0x10000>; + interrupt-parent = <&vic2>; + interrupts = <14>; + clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>; + clock-names = "sclk_mfc", "mfc"; + }; + + vic0: interrupt-controller@f2000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2000000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@f2100000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2100000 0x1000>; + #interrupt-cells = <1>; + }; + + vic2: interrupt-controller@f2200000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2200000 0x1000>; + #interrupt-cells = <1>; + }; + + vic3: interrupt-controller@f2300000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2300000 0x1000>; + #interrupt-cells = <1>; + }; + + fimd: fimd@f8000000 { + compatible = "samsung,s5pv210-fimd"; + interrupt-parent = <&vic2>; + reg = <0xf8000000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <0>, <1>, <2>; + clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>; + clock-names = "sclk_fimd", "fimd"; + status = "disabled"; + }; + + dmc0: dmc@f0000000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf0000000 0x1000>; + }; + + dmc1: dmc@f1400000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf1400000 0x1000>; + }; + + g2d: g2d@fa000000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0xfa000000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <9>; + clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + }; + + mdma1: dma-controller@fa200000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xfa200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <18>; + clocks = <&clocks CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + rotator: rotator@fa300000 { + compatible = "samsung,s5pv210-rotator"; + reg = <0xfa300000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <4>; + clocks = <&clocks CLK_ROTATOR>; + clock-names = "rotator"; + }; + + i2c1: i2c@fab00000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xfab00000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <13>; + clocks = <&clocks CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + camera: camera { + compatible = "samsung,fimc", "simple-bus"; + pinctrl-names = "default"; + pinctrl-0 = <>; + clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>; + clock-names = "sclk_cam0", "sclk_cam1"; + #address-cells = <1>; + #size-cells = <1>; + #clock-cells = <1>; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; + ranges; + + csis0: csis@fa600000 { + compatible = "samsung,s5pv210-csis"; + reg = <0xfa600000 0x4000>; + interrupt-parent = <&vic2>; + interrupts = <29>; + clocks = <&clocks CLK_CSIS>, + <&clocks SCLK_CSIS>; + clock-names = "clk_csis", + "sclk_csis"; + bus-width = <4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + fimc0: fimc@fb200000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb200000 0x1000>; + interrupts = <5>; + interrupt-parent = <&vic2>; + clocks = <&clocks CLK_FIMC0>, + <&clocks SCLK_FIMC0>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,min-pix-alignment = <16 8>; + samsung,cam-if; + }; + + fimc1: fimc@fb300000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb300000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <6>; + clocks = <&clocks CLK_FIMC1>, + <&clocks SCLK_FIMC1>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,min-pix-alignment = <1 1>; + samsung,mainscaler-ext; + samsung,cam-if; + samsung,lcd-wb; + }; + + fimc2: fimc@fb400000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb400000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <7>; + clocks = <&clocks CLK_FIMC2>, + <&clocks SCLK_FIMC2>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <1920 8192 1280 1920>; + samsung,min-pix-alignment = <16 8>; + samsung,rotators = <0>; + samsung,cam-if; + }; + }; + + jpeg_codec: jpeg-codec@fb600000 { + compatible = "samsung,s5pv210-jpeg"; + reg = <0xfb600000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <8>; + clocks = <&clocks CLK_JPEG>; + clock-names = "jpeg"; + }; + }; +}; + +#include "s5pv210-pinctrl.dtsi" -- cgit v1.2.3