From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/include/asm/cacheflush.h | 475 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 475 insertions(+) create mode 100644 arch/arm/include/asm/cacheflush.h (limited to 'arch/arm/include/asm/cacheflush.h') diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h new file mode 100644 index 000000000..a094f964c --- /dev/null +++ b/arch/arm/include/asm/cacheflush.h @@ -0,0 +1,475 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * arch/arm/include/asm/cacheflush.h + * + * Copyright (C) 1999-2002 Russell King + */ +#ifndef _ASMARM_CACHEFLUSH_H +#define _ASMARM_CACHEFLUSH_H + +#include + +#include +#include +#include +#include + +#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) + +/* + * This flag is used to indicate that the page pointed to by a pte is clean + * and does not require cleaning before returning it to the user. + */ +#define PG_dcache_clean PG_arch_1 + +/* + * MM Cache Management + * =================== + * + * The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files + * implement these methods. + * + * Start addresses are inclusive and end addresses are exclusive; + * start addresses should be rounded down, end addresses up. + * + * See Documentation/core-api/cachetlb.rst for more information. + * Please note that the implementation of these, and the required + * effects are cache-type (VIVT/VIPT/PIPT) specific. + * + * flush_icache_all() + * + * Unconditionally clean and invalidate the entire icache. + * Currently only needed for cache-v6.S and cache-v7.S, see + * __flush_icache_all for the generic implementation. + * + * flush_kern_all() + * + * Unconditionally clean and invalidate the entire cache. + * + * flush_kern_louis() + * + * Flush data cache levels up to the level of unification + * inner shareable and invalidate the I-cache. + * Only needed from v7 onwards, falls back to flush_cache_all() + * for all other processor versions. + * + * flush_user_all() + * + * Clean and invalidate all user space cache entries + * before a change of page tables. + * + * flush_user_range(start, end, flags) + * + * Clean and invalidate a range of cache entries in the + * specified address space before a change of page tables. + * - start - user start address (inclusive, page aligned) + * - end - user end address (exclusive, page aligned) + * - flags - vma->vm_flags field + * + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * - start - virtual start address + * - end - virtual end address + * + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start, end. If you have non-snooping + * Harvard caches, you need to implement this function. + * - start - virtual start address + * - end - virtual end address + * + * flush_kern_dcache_area(kaddr, size) + * + * Ensure that the data held in page is written back. + * - kaddr - page address + * - size - region size + * + * DMA Cache Coherency + * =================== + * + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * - start - virtual start address + * - end - virtual end address + */ + +struct cpu_cache_fns { + void (*flush_icache_all)(void); + void (*flush_kern_all)(void); + void (*flush_kern_louis)(void); + void (*flush_user_all)(void); + void (*flush_user_range)(unsigned long, unsigned long, unsigned int); + + void (*coherent_kern_range)(unsigned long, unsigned long); + int (*coherent_user_range)(unsigned long, unsigned long); + void (*flush_kern_dcache_area)(void *, size_t); + + void (*dma_map_area)(const void *, size_t, int); + void (*dma_unmap_area)(const void *, size_t, int); + + void (*dma_flush_range)(const void *, const void *); +} __no_randomize_layout; + +/* + * Select the calling method + */ +#ifdef MULTI_CACHE + +extern struct cpu_cache_fns cpu_cache; + +#define __cpuc_flush_icache_all cpu_cache.flush_icache_all +#define __cpuc_flush_kern_all cpu_cache.flush_kern_all +#define __cpuc_flush_kern_louis cpu_cache.flush_kern_louis +#define __cpuc_flush_user_all cpu_cache.flush_user_all +#define __cpuc_flush_user_range cpu_cache.flush_user_range +#define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range +#define __cpuc_coherent_user_range cpu_cache.coherent_user_range +#define __cpuc_flush_dcache_area cpu_cache.flush_kern_dcache_area + +/* + * These are private to the dma-mapping API. Do not use directly. + * Their sole purpose is to ensure that data held in the cache + * is visible to DMA, or data written by DMA to system memory is + * visible to the CPU. + */ +#define dmac_flush_range cpu_cache.dma_flush_range + +#else + +extern void __cpuc_flush_icache_all(void); +extern void __cpuc_flush_kern_all(void); +extern void __cpuc_flush_kern_louis(void); +extern void __cpuc_flush_user_all(void); +extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); +extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); +extern int __cpuc_coherent_user_range(unsigned long, unsigned long); +extern void __cpuc_flush_dcache_area(void *, size_t); + +/* + * These are private to the dma-mapping API. Do not use directly. + * Their sole purpose is to ensure that data held in the cache + * is visible to DMA, or data written by DMA to system memory is + * visible to the CPU. + */ +extern void dmac_flush_range(const void *, const void *); + +#endif + +/* + * Copy user data from/to a page which is mapped into a different + * processes address space. Really, we want to allow our "user + * space" model to handle this. + */ +extern void copy_to_user_page(struct vm_area_struct *, struct page *, + unsigned long, void *, const void *, unsigned long); +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + } while (0) + +/* + * Convert calls to our calling convention. + */ + +/* Invalidate I-cache */ +#define __flush_icache_all_generic() \ + asm("mcr p15, 0, %0, c7, c5, 0" \ + : : "r" (0)); + +/* Invalidate I-cache inner shareable */ +#define __flush_icache_all_v7_smp() \ + asm("mcr p15, 0, %0, c7, c1, 0" \ + : : "r" (0)); + +/* + * Optimized __flush_icache_all for the common cases. Note that UP ARMv7 + * will fall through to use __flush_icache_all_generic. + */ +#if (defined(CONFIG_CPU_V7) && \ + (defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K))) || \ + defined(CONFIG_SMP_ON_UP) +#define __flush_icache_preferred __cpuc_flush_icache_all +#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP) +#define __flush_icache_preferred __flush_icache_all_v7_smp +#elif __LINUX_ARM_ARCH__ == 6 && defined(CONFIG_ARM_ERRATA_411920) +#define __flush_icache_preferred __cpuc_flush_icache_all +#else +#define __flush_icache_preferred __flush_icache_all_generic +#endif + +static inline void __flush_icache_all(void) +{ + __flush_icache_preferred(); + dsb(ishst); +} + +/* + * Flush caches up to Level of Unification Inner Shareable + */ +#define flush_cache_louis() __cpuc_flush_kern_louis() + +#define flush_cache_all() __cpuc_flush_kern_all() + +static inline void vivt_flush_cache_mm(struct mm_struct *mm) +{ + if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) + __cpuc_flush_user_all(); +} + +static inline void +vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + + if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) + __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end), + vma->vm_flags); +} + +static inline void +vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) +{ + struct mm_struct *mm = vma->vm_mm; + + if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) { + unsigned long addr = user_addr & PAGE_MASK; + __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); + } +} + +#ifndef CONFIG_CPU_CACHE_VIPT +#define flush_cache_mm(mm) \ + vivt_flush_cache_mm(mm) +#define flush_cache_range(vma,start,end) \ + vivt_flush_cache_range(vma,start,end) +#define flush_cache_page(vma,addr,pfn) \ + vivt_flush_cache_page(vma,addr,pfn) +#else +extern void flush_cache_mm(struct mm_struct *mm); +extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn); +#endif + +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + +/* + * flush_icache_user_range is used when we want to ensure that the + * Harvard caches are synchronised for the user space address range. + * This is used for the ARM private sys_cacheflush system call. + */ +#define flush_icache_user_range(s,e) __cpuc_coherent_user_range(s,e) + +/* + * Perform necessary cache operations to ensure that data previously + * stored within this range of addresses can be executed by the CPU. + */ +#define flush_icache_range(s,e) __cpuc_coherent_kern_range(s,e) + +/* + * Perform necessary cache operations to ensure that the TLB will + * see data written in the specified area. + */ +#define clean_dcache_area(start,size) cpu_dcache_clean_area(start, size) + +/* + * flush_dcache_page is used when the kernel has written to the page + * cache page at virtual address page->virtual. + * + * If this page isn't mapped (ie, page_mapping == NULL), or it might + * have userspace mappings, then we _must_ always clean + invalidate + * the dcache entries associated with the kernel mapping. + * + * Otherwise we can defer the operation, and clean the cache when we are + * about to change to user space. This is the same method as used on SPARC64. + * See update_mmu_cache for the user space part. + */ +#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 +extern void flush_dcache_page(struct page *); + +#define ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE 1 +static inline void flush_kernel_vmap_range(void *addr, int size) +{ + if ((cache_is_vivt() || cache_is_vipt_aliasing())) + __cpuc_flush_dcache_area(addr, (size_t)size); +} +static inline void invalidate_kernel_vmap_range(void *addr, int size) +{ + if ((cache_is_vivt() || cache_is_vipt_aliasing())) + __cpuc_flush_dcache_area(addr, (size_t)size); +} + +#define ARCH_HAS_FLUSH_ANON_PAGE +static inline void flush_anon_page(struct vm_area_struct *vma, + struct page *page, unsigned long vmaddr) +{ + extern void __flush_anon_page(struct vm_area_struct *vma, + struct page *, unsigned long); + if (PageAnon(page)) + __flush_anon_page(vma, page, vmaddr); +} + +#define flush_dcache_mmap_lock(mapping) xa_lock_irq(&mapping->i_pages) +#define flush_dcache_mmap_unlock(mapping) xa_unlock_irq(&mapping->i_pages) + +/* + * We don't appear to need to do anything here. In fact, if we did, we'd + * duplicate cache flushing elsewhere performed by flush_dcache_page(). + */ +#define flush_icache_page(vma,page) do { } while (0) + +/* + * flush_cache_vmap() is used when creating mappings (eg, via vmap, + * vmalloc, ioremap etc) in kernel space for pages. On non-VIPT + * caches, since the direct-mappings of these pages may contain cached + * data, we need to do a full cache flush to ensure that writebacks + * don't corrupt data placed into these pages via the new mappings. + */ +static inline void flush_cache_vmap(unsigned long start, unsigned long end) +{ + if (!cache_is_vipt_nonaliasing()) + flush_cache_all(); + else + /* + * set_pte_at() called from vmap_pte_range() does not + * have a DSB after cleaning the cache line. + */ + dsb(ishst); +} + +static inline void flush_cache_vunmap(unsigned long start, unsigned long end) +{ + if (!cache_is_vipt_nonaliasing()) + flush_cache_all(); +} + +/* + * Memory synchronization helpers for mixed cached vs non cached accesses. + * + * Some synchronization algorithms have to set states in memory with the + * cache enabled or disabled depending on the code path. It is crucial + * to always ensure proper cache maintenance to update main memory right + * away in that case. + * + * Any cached write must be followed by a cache clean operation. + * Any cached read must be preceded by a cache invalidate operation. + * Yet, in the read case, a cache flush i.e. atomic clean+invalidate + * operation is needed to avoid discarding possible concurrent writes to the + * accessed memory. + * + * Also, in order to prevent a cached writer from interfering with an + * adjacent non-cached writer, each state variable must be located to + * a separate cache line. + */ + +/* + * This needs to be >= the max cache writeback size of all + * supported platforms included in the current kernel configuration. + * This is used to align state variables to their own cache lines. + */ +#define __CACHE_WRITEBACK_ORDER 6 /* guessed from existing platforms */ +#define __CACHE_WRITEBACK_GRANULE (1 << __CACHE_WRITEBACK_ORDER) + +/* + * There is no __cpuc_clean_dcache_area but we use it anyway for + * code intent clarity, and alias it to __cpuc_flush_dcache_area. + */ +#define __cpuc_clean_dcache_area __cpuc_flush_dcache_area + +/* + * Ensure preceding writes to *p by this CPU are visible to + * subsequent reads by other CPUs: + */ +static inline void __sync_cache_range_w(volatile void *p, size_t size) +{ + char *_p = (char *)p; + + __cpuc_clean_dcache_area(_p, size); + outer_clean_range(__pa(_p), __pa(_p + size)); +} + +/* + * Ensure preceding writes to *p by other CPUs are visible to + * subsequent reads by this CPU. We must be careful not to + * discard data simultaneously written by another CPU, hence the + * usage of flush rather than invalidate operations. + */ +static inline void __sync_cache_range_r(volatile void *p, size_t size) +{ + char *_p = (char *)p; + +#ifdef CONFIG_OUTER_CACHE + if (outer_cache.flush_range) { + /* + * Ensure dirty data migrated from other CPUs into our cache + * are cleaned out safely before the outer cache is cleaned: + */ + __cpuc_clean_dcache_area(_p, size); + + /* Clean and invalidate stale data for *p from outer ... */ + outer_flush_range(__pa(_p), __pa(_p + size)); + } +#endif + + /* ... and inner cache: */ + __cpuc_flush_dcache_area(_p, size); +} + +#define sync_cache_w(ptr) __sync_cache_range_w(ptr, sizeof *(ptr)) +#define sync_cache_r(ptr) __sync_cache_range_r(ptr, sizeof *(ptr)) + +/* + * Disabling cache access for one CPU in an ARMv7 SMP system is tricky. + * To do so we must: + * + * - Clear the SCTLR.C bit to prevent further cache allocations + * - Flush the desired level of cache + * - Clear the ACTLR "SMP" bit to disable local coherency + * + * ... and so without any intervening memory access in between those steps, + * not even to the stack. + * + * WARNING -- After this has been called: + * + * - No ldrex/strex (and similar) instructions must be used. + * - The CPU is obviously no longer coherent with the other CPUs. + * - This is unlikely to work as expected if Linux is running non-secure. + * + * Note: + * + * - This is known to apply to several ARMv7 processor implementations, + * however some exceptions may exist. Caveat emptor. + * + * - The clobber list is dictated by the call to v7_flush_dcache_*. + */ +#define v7_exit_coherency_flush(level) \ + asm volatile( \ + ".arch armv7-a \n\t" \ + "mrc p15, 0, r0, c1, c0, 0 @ get SCTLR \n\t" \ + "bic r0, r0, #"__stringify(CR_C)" \n\t" \ + "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR \n\t" \ + "isb \n\t" \ + "bl v7_flush_dcache_"__stringify(level)" \n\t" \ + "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR \n\t" \ + "bic r0, r0, #(1 << 6) @ disable local coherency \n\t" \ + "mcr p15, 0, r0, c1, c0, 1 @ set ACTLR \n\t" \ + "isb \n\t" \ + "dsb" \ + : : : "r0","r1","r2","r3","r4","r5","r6", \ + "r9","r10","ip","lr","memory" ) + +void flush_uprobe_xol_access(struct page *page, unsigned long uaddr, + void *kaddr, unsigned long len); + + +#ifdef CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND +void check_cpu_icache_size(int cpuid); +#else +static inline void check_cpu_icache_size(int cpuid) { } +#endif + +#endif -- cgit v1.2.3