From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mach-ep93xx/ts72xx.c | 422 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 422 insertions(+) create mode 100644 arch/arm/mach-ep93xx/ts72xx.c (limited to 'arch/arm/mach-ep93xx/ts72xx.c') diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c new file mode 100644 index 000000000..d3de7283e --- /dev/null +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * arch/arm/mach-ep93xx/ts72xx.c + * Technologic Systems TS72xx SBC support. + * + * Copyright (C) 2006 Lennert Buytenhek + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "gpio-ep93xx.h" +#include "hardware.h" + +#include +#include +#include + +#include "soc.h" +#include "ts72xx.h" + +/************************************************************************* + * IO map + *************************************************************************/ +static struct map_desc ts72xx_io_desc[] __initdata = { + { + .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE), + .length = TS72XX_MODEL_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE), + .length = TS72XX_OPTIONS_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), + .length = TS72XX_OPTIONS2_SIZE, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)TS72XX_CPLDVER_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE), + .length = TS72XX_CPLDVER_SIZE, + .type = MT_DEVICE, + } +}; + +static void __init ts72xx_map_io(void) +{ + ep93xx_map_io(); + iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc)); +} + + +/************************************************************************* + * NAND flash + *************************************************************************/ +#define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */ +#define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */ + +static void ts72xx_nand_hwcontrol(struct nand_chip *chip, + int cmd, unsigned int ctrl) +{ + if (ctrl & NAND_CTRL_CHANGE) { + void __iomem *addr = chip->legacy.IO_ADDR_R; + unsigned char bits; + + addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE); + + bits = __raw_readb(addr) & ~0x07; + bits |= (ctrl & NAND_NCE) << 2; /* bit 0 -> bit 2 */ + bits |= (ctrl & NAND_CLE); /* bit 1 -> bit 1 */ + bits |= (ctrl & NAND_ALE) >> 2; /* bit 2 -> bit 0 */ + + __raw_writeb(bits, addr); + } + + if (cmd != NAND_CMD_NONE) + __raw_writeb(cmd, chip->legacy.IO_ADDR_W); +} + +static int ts72xx_nand_device_ready(struct nand_chip *chip) +{ + void __iomem *addr = chip->legacy.IO_ADDR_R; + + addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE); + + return !!(__raw_readb(addr) & 0x20); +} + +#define TS72XX_BOOTROM_PART_SIZE (SZ_16K) +#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M) + +static struct mtd_partition ts72xx_nand_parts[] = { + { + .name = "TS-BOOTROM", + .offset = 0, + .size = TS72XX_BOOTROM_PART_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "Linux", + .offset = MTDPART_OFS_RETAIN, + .size = TS72XX_REDBOOT_PART_SIZE, + /* leave so much for last partition */ + }, { + .name = "RedBoot", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, +}; + +static struct platform_nand_data ts72xx_nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .chip_delay = 15, + }, + .ctrl = { + .cmd_ctrl = ts72xx_nand_hwcontrol, + .dev_ready = ts72xx_nand_device_ready, + }, +}; + +static struct resource ts72xx_nand_resource[] = { + { + .start = 0, /* filled in later */ + .end = 0, /* filled in later */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ts72xx_nand_flash = { + .name = "gen_nand", + .id = -1, + .dev.platform_data = &ts72xx_nand_data, + .resource = ts72xx_nand_resource, + .num_resources = ARRAY_SIZE(ts72xx_nand_resource), +}; + +static void __init ts72xx_register_flash(struct mtd_partition *parts, int n, + resource_size_t start) +{ + /* + * TS7200 has NOR flash all other TS72xx board have NAND flash. + */ + if (board_is_ts7200()) { + ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); + } else { + ts72xx_nand_resource[0].start = start; + ts72xx_nand_resource[0].end = start + SZ_16M - 1; + + ts72xx_nand_data.chip.partitions = parts; + ts72xx_nand_data.chip.nr_partitions = n; + + platform_device_register(&ts72xx_nand_flash); + } +} + +/************************************************************************* + * RTC M48T86 + *************************************************************************/ +#define TS72XX_RTC_INDEX_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x00800000) +#define TS72XX_RTC_DATA_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x01700000) + +static struct resource ts72xx_rtc_resources[] = { + DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01), + DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01), +}; + +static struct platform_device ts72xx_rtc_device = { + .name = "rtc-m48t86", + .id = -1, + .resource = ts72xx_rtc_resources, + .num_resources = ARRAY_SIZE(ts72xx_rtc_resources), +}; + +/************************************************************************* + * Watchdog (in CPLD) + *************************************************************************/ +#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000) +#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000) + +static struct resource ts72xx_wdt_resources[] = { + DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01), + DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01), +}; + +static struct platform_device ts72xx_wdt_device = { + .name = "ts72xx-wdt", + .id = -1, + .resource = ts72xx_wdt_resources, + .num_resources = ARRAY_SIZE(ts72xx_wdt_resources), +}; + +/************************************************************************* + * ETH + *************************************************************************/ +static struct ep93xx_eth_data __initdata ts72xx_eth_data = { + .phy_id = 1, +}; + +/************************************************************************* + * SPI SD/MMC host + *************************************************************************/ +#define BK3_EN_SDCARD_PHYS_BASE 0x12400000 +#define BK3_EN_SDCARD_PWR 0x0 +#define BK3_DIS_SDCARD_PWR 0x0C +static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd) +{ + void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K); + + if (!pwr_sd) { + pr_err("Failed to enable SD card power!"); + return; + } + + pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__, + !!vdd ? "ON" : "OFF", vdd); + + if (!!vdd) + __raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd); + else + __raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd); + + iounmap(pwr_sd); +} + +static struct mmc_spi_platform_data bk3_spi_mmc_data = { + .detect_delay = 500, + .powerup_msecs = 100, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .caps = MMC_CAP_NONREMOVABLE, + .setpower = bk3_mmc_spi_setpower, +}; + +/************************************************************************* + * SPI Bus - SD card access + *************************************************************************/ +static struct spi_board_info bk3_spi_board_info[] __initdata = { + { + .modalias = "mmc_spi", + .platform_data = &bk3_spi_mmc_data, + .max_speed_hz = 7.4E6, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +/* + * This is a stub -> the FGPIO[3] pin is not connected on the schematic + * The all work is performed automatically by !SPI_FRAME (SFRM1) and + * goes through CPLD + */ +static struct gpiod_lookup_table bk3_spi_cs_gpio_table = { + .dev_id = "spi0", + .table = { + GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct ep93xx_spi_info bk3_spi_master __initdata = { + .use_dma = 1, +}; + +/************************************************************************* + * TS72XX support code + *************************************************************************/ +#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) + +/* Relative to EP93XX_CS1_PHYS_BASE */ +#define TS73XX_FPGA_LOADER_BASE 0x03c00000 + +static struct resource ts73xx_fpga_resources[] = { + { + .start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE, + .end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ts73xx_fpga_device = { + .name = "ts73xx-fpga-mgr", + .id = -1, + .resource = ts73xx_fpga_resources, + .num_resources = ARRAY_SIZE(ts73xx_fpga_resources), +}; + +#endif + +/************************************************************************* + * SPI Bus + *************************************************************************/ +static struct spi_board_info ts72xx_spi_devices[] __initdata = { + { + .modalias = "tmp122", + .max_speed_hz = 2 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = { + .dev_id = "spi0", + .table = { + /* DIO_17 */ + GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct ep93xx_spi_info ts72xx_spi_info __initdata = { + /* Intentionally left blank */ +}; + +static void __init ts72xx_init_machine(void) +{ + ep93xx_init_devices(); + ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts), + is_ts9420_installed() ? + EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE); + platform_device_register(&ts72xx_rtc_device); + platform_device_register(&ts72xx_wdt_device); + + ep93xx_register_eth(&ts72xx_eth_data, 1); +#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) + if (board_is_ts7300()) + platform_device_register(&ts73xx_fpga_device); +#endif + gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table); + ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, + ARRAY_SIZE(ts72xx_spi_devices)); +} + +MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") + /* Maintainer: Lennert Buytenhek */ + .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, + .map_io = ts72xx_map_io, + .init_irq = ep93xx_init_irq, + .init_time = ep93xx_timer_init, + .init_machine = ts72xx_init_machine, + .restart = ep93xx_restart, +MACHINE_END + +/************************************************************************* + * EP93xx I2S audio peripheral handling + *************************************************************************/ +static struct resource ep93xx_i2s_resource[] = { + DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), + DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"), +}; + +static struct platform_device ep93xx_i2s_device = { + .name = "ep93xx-spilink-i2s", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), + .resource = ep93xx_i2s_resource, +}; + +/************************************************************************* + * BK3 support code + *************************************************************************/ +static struct mtd_partition bk3_nand_parts[] = { + { + .name = "System", + .offset = 0x00000000, + .size = 0x01e00000, + }, { + .name = "Data", + .offset = 0x01e00000, + .size = 0x05f20000 + }, { + .name = "RedBoot", + .offset = 0x07d20000, + .size = 0x002e0000, + .mask_flags = MTD_WRITEABLE, /* force RO */ + }, +}; + +static void __init bk3_init_machine(void) +{ + ep93xx_init_devices(); + + ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts), + EP93XX_CS6_PHYS_BASE); + + ep93xx_register_eth(&ts72xx_eth_data, 1); + + gpiod_add_lookup_table(&bk3_spi_cs_gpio_table); + ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info, + ARRAY_SIZE(bk3_spi_board_info)); + + /* Configure ep93xx's I2S to use AC97 pins */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); + platform_device_register(&ep93xx_i2s_device); +} + +MACHINE_START(BK3, "Liebherr controller BK3.1") + /* Maintainer: Lukasz Majewski */ + .atag_offset = 0x100, + .nr_irqs = NR_EP93XX_IRQS, + .map_io = ts72xx_map_io, + .init_irq = ep93xx_init_irq, + .init_time = ep93xx_timer_init, + .init_machine = bk3_init_machine, + .restart = ep93xx_restart, +MACHINE_END -- cgit v1.2.3