From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mach-omap2/Kconfig | 281 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 281 insertions(+) create mode 100644 arch/arm/mach-omap2/Kconfig (limited to 'arch/arm/mach-omap2/Kconfig') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig new file mode 100644 index 000000000..3b53dda9e --- /dev/null +++ b/arch/arm/mach-omap2/Kconfig @@ -0,0 +1,281 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "TI OMAP/AM/DM/DRA Family" + depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 + +config OMAP_HWMOD + bool + +config ARCH_OMAP2 + bool "TI OMAP2" + depends on ARCH_MULTI_V6 + select ARCH_OMAP2PLUS + select CPU_V6 + select OMAP_HWMOD + select SOC_HAS_OMAP2_SDRC + +config ARCH_OMAP3 + bool "TI OMAP3" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARM_CPU_SUSPEND + select OMAP_HWMOD + select OMAP_INTERCONNECT + select PM_OPP + select SOC_HAS_OMAP2_SDRC + select ARM_ERRATA_430973 + +config ARCH_OMAP4 + bool "TI OMAP4" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP + select ARM_CPU_SUSPEND + select ARM_ERRATA_720789 + select ARM_GIC + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select OMAP_INTERCONNECT + select OMAP_INTERCONNECT_BARRIER + select PL310_ERRATA_588369 if CACHE_L2X0 + select PL310_ERRATA_727915 if CACHE_L2X0 + select PM_OPP + select PM if CPU_IDLE + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + select OMAP_INTERCONNECT + +config SOC_OMAP5 + bool "TI OMAP5" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARM_CPU_SUSPEND + select ARM_GIC + select HAVE_ARM_SCU if SMP + select HAVE_ARM_ARCH_TIMER + select ARM_ERRATA_798181 if SMP + select OMAP_INTERCONNECT + select OMAP_INTERCONNECT_BARRIER + select PM_OPP + select ZONE_DMA if ARM_LPAE + +config SOC_AM33XX + bool "TI AM33XX" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARM_CPU_SUSPEND + +config SOC_AM43XX + bool "TI AM43x" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARM_GIC + select MACH_OMAP_GENERIC + select HAVE_ARM_SCU + select GENERIC_CLOCKEVENTS_BROADCAST + select HAVE_ARM_TWD + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + select OMAP_INTERCONNECT + select ARM_CPU_SUSPEND + +config SOC_DRA7XX + bool "TI DRA7XX" + depends on ARCH_MULTI_V7 + select ARCH_OMAP2PLUS + select ARM_CPU_SUSPEND + select ARM_GIC + select HAVE_ARM_SCU if SMP + select HAVE_ARM_ARCH_TIMER + select IRQ_CROSSBAR + select ARM_ERRATA_798181 if SMP + select OMAP_INTERCONNECT + select OMAP_INTERCONNECT_BARRIER + select PM_OPP + select ZONE_DMA if ARM_LPAE + select PINCTRL_TI_IODELAY if OF && PINCTRL + +config ARCH_OMAP2PLUS + bool + select ARCH_HAS_BANDGAP + select ARCH_HAS_RESET_CONTROLLER + select ARCH_OMAP + select CLKSRC_MMIO + select GENERIC_IRQ_CHIP + select GPIOLIB + select MACH_OMAP_GENERIC + select MEMORY + select MFD_SYSCON + select OMAP_DM_SYSTIMER + select OMAP_DM_TIMER + select OMAP_GPMC + select PINCTRL + select PM + select PM_GENERIC_DOMAINS + select PM_GENERIC_DOMAINS_OF + select RESET_CONTROLLER + select SOC_BUS + select TI_SYSC + select OMAP_IRQCHIP + select CLKSRC_TI_32K + help + Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 + +config OMAP_INTERCONNECT_BARRIER + bool + select ARM_HEAVY_MB + +config ARCH_OMAP + bool + +if ARCH_OMAP2PLUS + +menu "TI OMAP2/3/4 Specific Features" + +config ARCH_OMAP2PLUS_TYPICAL + bool "Typical OMAP configuration" + default y + select AEABI + select HIGHMEM + select I2C + select I2C_OMAP + select MENELAUS if ARCH_OMAP2 + select NEON if CPU_V7 + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 + select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 + select VFP + help + Compile a kernel suitable for booting most boards + +config SOC_HAS_OMAP2_SDRC + bool "OMAP2 SDRAM Controller support" + +config SOC_HAS_REALTIME_COUNTER + bool "Real time free running counter" + depends on SOC_OMAP5 || SOC_DRA7XX + default y + +config POWER_AVS_OMAP + bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" + depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM + select POWER_SUPPLY + help + Say Y to enable AVS(Adaptive Voltage Scaling) + support on OMAP containing the version 1 or + version 2 of the SmartReflex IP. + V1 is the 65nm version used in OMAP3430. + V2 is the update for the 45nm version of the IP used in OMAP3630 + and OMAP4430 + + Please note, that by default SmartReflex is only + initialized and not enabled. To enable the automatic voltage + compensation for vdd mpu and vdd core from user space, + user must write 1 to + /debug/smartreflex/sr_/autocomp, + where X is mpu_iva or core for OMAP3. + Optionally autocompensation can be enabled in the kernel + by default during system init via the enable_on_init flag + which an be passed as platform data to the smartreflex driver. + +config POWER_AVS_OMAP_CLASS3 + bool "Class 3 mode of Smartreflex Implementation" + depends on POWER_AVS_OMAP && TWL4030_CORE + help + Say Y to enable Class 3 implementation of Smartreflex + + Class 3 implementation of Smartreflex employs continuous hardware + voltage calibration. + +config OMAP3_L2_AUX_SECURE_SAVE_RESTORE + bool "OMAP3 HS/EMU save and restore for L2 AUX control register" + depends on ARCH_OMAP3 && PM + help + Without this option, L2 Auxiliary control register contents are + lost during off-mode entry on HS/EMU devices. This feature + requires support from PPA / boot-loader in HS/EMU devices, which + currently does not exist by default. + +config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID + int "Service ID for the support routine to set L2 AUX control" + depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE + default 43 + help + PPA routine service ID for setting L2 auxiliary control register. + +comment "OMAP Core Type" + depends on ARCH_OMAP2 + +config SOC_OMAP2420 + bool "OMAP2420 support" + depends on ARCH_OMAP2 + default y + select OMAP_DM_SYSTIMER + select OMAP_DM_TIMER + select SOC_HAS_OMAP2_SDRC + +config SOC_OMAP2430 + bool "OMAP2430 support" + depends on ARCH_OMAP2 + default y + select SOC_HAS_OMAP2_SDRC + +config SOC_OMAP3430 + bool "OMAP3430 support" + depends on ARCH_OMAP3 + default y + select SOC_HAS_OMAP2_SDRC + +config SOC_TI81XX + bool "TI81XX support" + depends on ARCH_OMAP3 + default y + +comment "OMAP Legacy Platform Data Board Type" + depends on ARCH_OMAP2PLUS + +config MACH_OMAP_GENERIC + bool + +config MACH_OMAP2_TUSB6010 + bool + depends on ARCH_OMAP2 && SOC_OMAP2420 + default y if MACH_NOKIA_N8X0 + +config MACH_NOKIA_N810 + bool + +config MACH_NOKIA_N810_WIMAX + bool + +config MACH_NOKIA_N8X0 + bool "Nokia N800/N810" + depends on SOC_OMAP2420 + default y + select MACH_NOKIA_N810 + select MACH_NOKIA_N810_WIMAX + +config OMAP3_SDRC_AC_TIMING + bool "Enable SDRC AC timing register changes" + depends on ARCH_OMAP3 + help + If you know that none of your system initiators will attempt to + access SDRAM during CORE DVFS, select Y here. This should boost + SDRAM performance at lower CORE OPPs. There are relatively few + users who will wish to say yes at this point - almost everyone will + wish to say no. Selecting yes without understanding what is + going on could result in system crashes; + +endmenu + +endif + +config OMAP5_ERRATA_801819 + bool "Errata 801819: An eviction from L1 data cache might stall indefinitely" + depends on SOC_OMAP5 || SOC_DRA7XX + help + A livelock can occur in the L2 cache arbitration that might prevent + a snoop from completing. Under certain conditions this can cause the + system to deadlock. + +endmenu -- cgit v1.2.3