From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mach-omap2/board-generic.c | 372 ++++++++++++++++++++++++++++++++++++ 1 file changed, 372 insertions(+) create mode 100644 arch/arm/mach-omap2/board-generic.c (limited to 'arch/arm/mach-omap2/board-generic.c') diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c new file mode 100644 index 000000000..1610c567a --- /dev/null +++ b/arch/arm/mach-omap2/board-generic.c @@ -0,0 +1,372 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt + * + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ + * + * Modified from the original mach-omap/omap2/board-generic.c did by Paul + * to support the OMAP2+ device tree boards with an unique board file. + */ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "common.h" + +static const struct of_device_id omap_dt_match_table[] __initconst = { + { .compatible = "simple-bus", }, + { .compatible = "ti,omap-infra", }, + { } +}; + +static void __init __maybe_unused omap_generic_init(void) +{ + pdata_quirks_init(omap_dt_match_table); + omap_soc_device_init(); +} + +/* Clocks are needed early, see drivers/clocksource for the rest */ +static void __init __maybe_unused omap_init_time_of(void) +{ + omap_clk_init(); + timer_probe(); +} + +/* Used by am437x for ARM timer in non-SMP configurations */ +#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +void tick_broadcast(const struct cpumask *mask) +{ +} +#endif + +#ifdef CONFIG_SOC_OMAP2420 +static const char *const omap242x_boards_compat[] __initconst = { + "ti,omap2420", + NULL, +}; + +DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap242x_map_io, + .init_early = omap2420_init_early, + .init_machine = omap_generic_init, + .init_time = omap_init_time_of, + .dt_compat = omap242x_boards_compat, + .restart = omap2xxx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static const char *const omap243x_boards_compat[] __initconst = { + "ti,omap2430", + NULL, +}; + +DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap243x_map_io, + .init_early = omap2430_init_early, + .init_machine = omap_generic_init, + .init_time = omap_init_time_of, + .dt_compat = omap243x_boards_compat, + .restart = omap2xxx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_ARCH_OMAP3 +/* Some boards need board name for legacy userspace in /proc/cpuinfo */ +static const char *const n900_boards_compat[] __initconst = { + "nokia,omap3-n900", + NULL, +}; + +/* Set system_rev from atags */ +static void __init rx51_set_system_rev(const struct tag *tags) +{ + const struct tag *tag; + + if (tags->hdr.tag != ATAG_CORE) + return; + + for_each_tag(tag, tags) { + if (tag->hdr.tag == ATAG_REVISION) { + system_rev = tag->u.revision.rev; + break; + } + } +} + +/* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags, + * save them while the data is still not overwritten + */ +static void __init rx51_reserve(void) +{ + const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100); + + save_atags(tags); + rx51_set_system_rev(tags); + omap_reserve(); +} + +DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board") + .reserve = rx51_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap_init_time_of, + .dt_compat = n900_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END + +/* Generic omap3 boards, most boards can use these */ +static const char *const omap3_boards_compat[] __initconst = { + "ti,omap3430", + "ti,omap3", + NULL, +}; + +DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap_init_time_of, + .dt_compat = omap3_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END + +static const char *const omap36xx_boards_compat[] __initconst = { + "ti,omap3630", + "ti,omap36xx", + NULL, +}; + +DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap_init_time_of, + .dt_compat = omap36xx_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END + +static const char *const omap3_gp_boards_compat[] __initconst = { + "ti,omap3-beagle", + "timll,omap3-devkit8000", + NULL, +}; + +DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap_init_time_of, + .dt_compat = omap3_gp_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END + +static const char *const am3517_boards_compat[] __initconst = { + "ti,am3517", + NULL, +}; + +DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = am35xx_init_early, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap_init_time_of, + .dt_compat = am3517_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_SOC_TI81XX +static const char *const ti814x_boards_compat[] __initconst = { + "ti,dm8148", + "ti,dm814", + NULL, +}; + +DT_MACHINE_START(TI814X_DT, "Generic ti814x (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = ti81xx_map_io, + .init_early = ti814x_init_early, + .init_machine = omap_generic_init, + .init_late = ti81xx_init_late, + .init_time = omap_init_time_of, + .dt_compat = ti814x_boards_compat, + .restart = ti81xx_restart, +MACHINE_END + +static const char *const ti816x_boards_compat[] __initconst = { + "ti,dm8168", + "ti,dm816", + NULL, +}; + +DT_MACHINE_START(TI816X_DT, "Generic ti816x (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = ti81xx_map_io, + .init_early = ti816x_init_early, + .init_machine = omap_generic_init, + .init_late = ti81xx_init_late, + .init_time = omap_init_time_of, + .dt_compat = ti816x_boards_compat, + .restart = ti81xx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_SOC_AM33XX +static const char *const am33xx_boards_compat[] __initconst = { + "ti,am33xx", + NULL, +}; + +DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = am33xx_map_io, + .init_early = am33xx_init_early, + .init_machine = omap_generic_init, + .init_late = am33xx_init_late, + .init_time = omap_init_time_of, + .dt_compat = am33xx_boards_compat, + .restart = am33xx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_ARCH_OMAP4 +static const char *const omap4_boards_compat[] __initconst = { + "ti,omap4460", + "ti,omap4430", + "ti,omap4", + NULL, +}; + +DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") + .l2c_aux_val = OMAP_L2C_AUX_CTRL, + .l2c_aux_mask = 0xcf9fffff, + .l2c_write_sec = omap4_l2c310_write_sec, + .reserve = omap_reserve, + .smp = smp_ops(omap4_smp_ops), + .map_io = omap4_map_io, + .init_early = omap4430_init_early, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_late = omap4430_init_late, + .init_time = omap_init_time_of, + .dt_compat = omap4_boards_compat, + .restart = omap44xx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_SOC_OMAP5 +static const char *const omap5_boards_compat[] __initconst = { + "ti,omap5432", + "ti,omap5430", + "ti,omap5", + NULL, +}; + +DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) + .dma_zone_size = SZ_2G, +#endif + .reserve = omap_reserve, + .smp = smp_ops(omap4_smp_ops), + .map_io = omap5_map_io, + .init_early = omap5_init_early, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_late = omap5_init_late, + .init_time = omap5_realtime_timer_init, + .dt_compat = omap5_boards_compat, + .restart = omap44xx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_SOC_AM43XX +static const char *const am43_boards_compat[] __initconst = { + "ti,am4372", + "ti,am43", + NULL, +}; + +DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") + .l2c_aux_val = OMAP_L2C_AUX_CTRL, + .l2c_aux_mask = 0xcf9fffff, + .l2c_write_sec = omap4_l2c310_write_sec, + .map_io = am33xx_map_io, + .init_early = am43xx_init_early, + .init_late = am43xx_init_late, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_time = omap_init_time_of, + .dt_compat = am43_boards_compat, + .restart = omap44xx_restart, +MACHINE_END +#endif + +#ifdef CONFIG_SOC_DRA7XX +static const char *const dra74x_boards_compat[] __initconst = { + "ti,dra762", + "ti,am5728", + "ti,am5726", + "ti,dra742", + "ti,dra7", + NULL, +}; + +DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)") +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) + .dma_zone_size = SZ_2G, +#endif + .reserve = omap_reserve, + .smp = smp_ops(omap4_smp_ops), + .map_io = dra7xx_map_io, + .init_early = dra7xx_init_early, + .init_late = dra7xx_init_late, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_time = omap5_realtime_timer_init, + .dt_compat = dra74x_boards_compat, + .restart = omap44xx_restart, +MACHINE_END + +static const char *const dra72x_boards_compat[] __initconst = { + "ti,am5718", + "ti,am5716", + "ti,dra722", + "ti,dra718", + NULL, +}; + +DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)") +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) + .dma_zone_size = SZ_2G, +#endif + .reserve = omap_reserve, + .map_io = dra7xx_map_io, + .init_early = dra7xx_init_early, + .init_late = dra7xx_init_late, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_time = omap5_realtime_timer_init, + .dt_compat = dra72x_boards_compat, + .restart = omap44xx_restart, +MACHINE_END +#endif -- cgit v1.2.3