From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mach-omap2/cm_common.c | 379 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 379 insertions(+) create mode 100644 arch/arm/mach-omap2/cm_common.c (limited to 'arch/arm/mach-omap2/cm_common.c') diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c new file mode 100644 index 000000000..87f2c2d2d --- /dev/null +++ b/arch/arm/mach-omap2/cm_common.c @@ -0,0 +1,379 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * OMAP2+ common Clock Management (CM) IP block functions + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * XXX This code should eventually be moved to a CM driver. + */ + +#include +#include +#include +#include +#include +#include + +#include "cm2xxx.h" +#include "cm3xxx.h" +#include "cm33xx.h" +#include "cm44xx.h" +#include "clock.h" + +/* + * cm_ll_data: function pointers to SoC-specific implementations of + * common CM functions + */ +static struct cm_ll_data null_cm_ll_data; +static const struct cm_ll_data *cm_ll_data = &null_cm_ll_data; + +/* cm_base: base virtual address of the CM IP block */ +struct omap_domain_base cm_base; + +/* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */ +struct omap_domain_base cm2_base; + +#define CM_NO_CLOCKS 0x1 +#define CM_SINGLE_INSTANCE 0x2 + +/** + * cm_split_idlest_reg - split CM_IDLEST reg addr into its components + * @idlest_reg: CM_IDLEST* virtual address + * @prcm_inst: pointer to an s16 to return the PRCM instance offset + * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID + * + * Given an absolute CM_IDLEST register address @idlest_reg, passes + * the PRCM instance offset and IDLEST register ID back to the caller + * via the @prcm_inst and @idlest_reg_id. Returns -EINVAL upon error, + * or 0 upon success. XXX This function is only needed until absolute + * register addresses are removed from the OMAP struct clk records. + */ +int cm_split_idlest_reg(struct clk_omap_reg *idlest_reg, s16 *prcm_inst, + u8 *idlest_reg_id) +{ + int ret; + if (!cm_ll_data->split_idlest_reg) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + ret = cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst, + idlest_reg_id); + *prcm_inst -= cm_base.offset; + return ret; +} + +/** + * omap_cm_wait_module_ready - wait for a module to leave idle or standby + * @part: PRCM partition + * @prcm_mod: PRCM module offset + * @idlest_reg: CM_IDLESTx register + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon + * success, -EBUSY if the module doesn't enable in time, or -EINVAL if + * no per-SoC wait_module_ready() function pointer has been registered + * or if the idlest register is unknown on the SoC. + */ +int omap_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_reg, + u8 idlest_shift) +{ + if (!cm_ll_data->wait_module_ready) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + return cm_ll_data->wait_module_ready(part, prcm_mod, idlest_reg, + idlest_shift); +} + +/** + * omap_cm_wait_module_idle - wait for a module to enter idle or standby + * @part: PRCM partition + * @prcm_mod: PRCM module offset + * @idlest_reg: CM_IDLESTx register + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is no longer clocked. Return + * 0 upon success, -EBUSY if the module doesn't enable in time, or + * -EINVAL if no per-SoC wait_module_idle() function pointer has been + * registered or if the idlest register is unknown on the SoC. + */ +int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg, + u8 idlest_shift) +{ + if (!cm_ll_data->wait_module_idle) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + return cm_ll_data->wait_module_idle(part, prcm_mod, idlest_reg, + idlest_shift); +} + +/** + * omap_cm_module_enable - enable a module + * @mode: target mode for the module + * @part: PRCM partition + * @inst: PRCM instance + * @clkctrl_offs: CM_CLKCTRL register offset for the module + * + * Enables clocks for a module identified by (@part, @inst, @clkctrl_offs) + * making its IO space accessible. Return 0 upon success, -EINVAL if no + * per-SoC module_enable() function pointer has been registered. + */ +int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs) +{ + if (!cm_ll_data->module_enable) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + cm_ll_data->module_enable(mode, part, inst, clkctrl_offs); + return 0; +} + +/** + * omap_cm_module_disable - disable a module + * @part: PRCM partition + * @inst: PRCM instance + * @clkctrl_offs: CM_CLKCTRL register offset for the module + * + * Disables clocks for a module identified by (@part, @inst, @clkctrl_offs) + * makings its IO space inaccessible. Return 0 upon success, -EINVAL if + * no per-SoC module_disable() function pointer has been registered. + */ +int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs) +{ + if (!cm_ll_data->module_disable) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + cm_ll_data->module_disable(part, inst, clkctrl_offs); + return 0; +} + +u32 omap_cm_xlate_clkctrl(u8 part, u16 inst, u16 clkctrl_offs) +{ + if (!cm_ll_data->xlate_clkctrl) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return 0; + } + return cm_ll_data->xlate_clkctrl(part, inst, clkctrl_offs); +} + +/** + * cm_register - register per-SoC low-level data with the CM + * @cld: low-level per-SoC OMAP CM data & function pointers to register + * + * Register per-SoC low-level OMAP CM data and function pointers with + * the OMAP CM common interface. The caller must keep the data + * pointed to by @cld valid until it calls cm_unregister() and + * it returns successfully. Returns 0 upon success, -EINVAL if @cld + * is NULL, or -EEXIST if cm_register() has already been called + * without an intervening cm_unregister(). + */ +int cm_register(const struct cm_ll_data *cld) +{ + if (!cld) + return -EINVAL; + + if (cm_ll_data != &null_cm_ll_data) + return -EEXIST; + + cm_ll_data = cld; + + return 0; +} + +/** + * cm_unregister - unregister per-SoC low-level data & function pointers + * @cld: low-level per-SoC OMAP CM data & function pointers to unregister + * + * Unregister per-SoC low-level OMAP CM data and function pointers + * that were previously registered with cm_register(). The + * caller may not destroy any of the data pointed to by @cld until + * this function returns successfully. Returns 0 upon success, or + * -EINVAL if @cld is NULL or if @cld does not match the struct + * cm_ll_data * previously registered by cm_register(). + */ +int cm_unregister(const struct cm_ll_data *cld) +{ + if (!cld || cm_ll_data != cld) + return -EINVAL; + + cm_ll_data = &null_cm_ll_data; + + return 0; +} + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) +static struct omap_prcm_init_data cm_data __initdata = { + .index = TI_CLKM_CM, + .init = omap4_cm_init, +}; + +static struct omap_prcm_init_data cm2_data __initdata = { + .index = TI_CLKM_CM2, + .init = omap4_cm_init, +}; +#endif + +#ifdef CONFIG_ARCH_OMAP2 +static struct omap_prcm_init_data omap2_prcm_data __initdata = { + .index = TI_CLKM_CM, + .init = omap2xxx_cm_init, + .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE, +}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static struct omap_prcm_init_data omap3_cm_data __initdata = { + .index = TI_CLKM_CM, + .init = omap3xxx_cm_init, + .flags = CM_SINGLE_INSTANCE, + + /* + * IVA2 offset is a negative value, must offset the cm_base address + * by this to get it to positive side on the iomap + */ + .offset = -OMAP3430_IVA2_MOD, +}; +#endif + +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX) +static struct omap_prcm_init_data am3_prcm_data __initdata = { + .index = TI_CLKM_CM, + .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE, + .init = am33xx_cm_init, +}; +#endif + +#ifdef CONFIG_SOC_AM43XX +static struct omap_prcm_init_data am4_prcm_data __initdata = { + .index = TI_CLKM_CM, + .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE, + .init = omap4_cm_init, +}; +#endif + +static const struct of_device_id omap_cm_dt_match_table[] __initconst = { +#ifdef CONFIG_ARCH_OMAP2 + { .compatible = "ti,omap2-prcm", .data = &omap2_prcm_data }, +#endif +#ifdef CONFIG_ARCH_OMAP3 + { .compatible = "ti,omap3-cm", .data = &omap3_cm_data }, +#endif +#ifdef CONFIG_ARCH_OMAP4 + { .compatible = "ti,omap4-cm1", .data = &cm_data }, + { .compatible = "ti,omap4-cm2", .data = &cm2_data }, +#endif +#ifdef CONFIG_SOC_OMAP5 + { .compatible = "ti,omap5-cm-core-aon", .data = &cm_data }, + { .compatible = "ti,omap5-cm-core", .data = &cm2_data }, +#endif +#ifdef CONFIG_SOC_DRA7XX + { .compatible = "ti,dra7-cm-core-aon", .data = &cm_data }, + { .compatible = "ti,dra7-cm-core", .data = &cm2_data }, +#endif +#ifdef CONFIG_SOC_AM33XX + { .compatible = "ti,am3-prcm", .data = &am3_prcm_data }, +#endif +#ifdef CONFIG_SOC_AM43XX + { .compatible = "ti,am4-prcm", .data = &am4_prcm_data }, +#endif +#ifdef CONFIG_SOC_TI81XX + { .compatible = "ti,dm814-prcm", .data = &am3_prcm_data }, + { .compatible = "ti,dm816-prcm", .data = &am3_prcm_data }, +#endif + { } +}; + +/** + * omap2_cm_base_init - initialize iomappings for the CM drivers + * + * Detects and initializes the iomappings for the CM driver, based + * on the DT data. Returns 0 in success, negative error value + * otherwise. + */ +int __init omap2_cm_base_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + struct omap_prcm_init_data *data; + struct resource res; + int ret; + struct omap_domain_base *mem = NULL; + + for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) { + data = (struct omap_prcm_init_data *)match->data; + + ret = of_address_to_resource(np, 0, &res); + if (ret) { + of_node_put(np); + return ret; + } + + if (data->index == TI_CLKM_CM) + mem = &cm_base; + + if (data->index == TI_CLKM_CM2) + mem = &cm2_base; + + data->mem = ioremap(res.start, resource_size(&res)); + + if (mem) { + mem->pa = res.start + data->offset; + mem->va = data->mem + data->offset; + mem->offset = data->offset; + } + + data->np = np; + + if (data->init && (data->flags & CM_SINGLE_INSTANCE || + (cm_base.va && cm2_base.va))) + data->init(data); + } + + return 0; +} + +/** + * omap_cm_init - low level init for the CM drivers + * + * Initializes the low level clock infrastructure for CM drivers. + * Returns 0 in success, negative error value in failure. + */ +int __init omap_cm_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + const struct omap_prcm_init_data *data; + int ret; + + for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) { + data = match->data; + + if (data->flags & CM_NO_CLOCKS) + continue; + + ret = omap2_clk_provider_init(np, data->index, NULL, data->mem); + if (ret) { + of_node_put(np); + return ret; + } + } + + return 0; +} -- cgit v1.2.3