From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 668 +++++++++++++++++++++ 1 file changed, 668 insertions(+) create mode 100644 arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c (limited to 'arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c') diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c new file mode 100644 index 000000000..4982e04ea --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -0,0 +1,668 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * omap_hwmod_2xxx_ipblock_data.c - common IP block data for OMAP2xxx + * + * Copyright (C) 2011 Nokia Corporation + * Paul Walmsley + */ + +#include + +#include "omap_hwmod.h" +#include "omap_hwmod_common_data.h" +#include "cm-regbits-24xx.h" +#include "prm-regbits-24xx.h" +#include "wd_timer.h" + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2_dispc_sysc, +}; + +/* OMAP2xxx Timer Common */ +static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_timer_hwmod_class = { + .name = "timer", + .sysc = &omap2xxx_timer_sysc, +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap2xxx_wd_timer_sysc, + .pre_shutdown = &omap2_wd_timer_disable, + .reset = &omap2_wd_timer_reset, +}; + +/* + * 'gpio' class + * general purpose io module + */ +static struct omap_hwmod_class_sysconfig omap2xxx_gpio_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2xxx_gpio_hwmod_class = { + .name = "gpio", + .sysc = &omap2xxx_gpio_sysc, +}; + +/* + * 'mailbox' class + * mailbox module allowing communication between the on-chip processors + * using a queued mailbox-interrupt mechanism. + */ + +static struct omap_hwmod_class_sysconfig omap2xxx_mailbox_sysc = { + .rev_offs = 0x000, + .sysc_offs = 0x010, + .syss_offs = 0x014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2xxx_mailbox_hwmod_class = { + .name = "mailbox", + .sysc = &omap2xxx_mailbox_sysc, +}; + +/* + * 'mcspi' class + * multichannel serial port interface (mcspi) / master/slave synchronous serial + * bus + */ + +static struct omap_hwmod_class_sysconfig omap2xxx_mcspi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2xxx_mcspi_class = { + .name = "mcspi", + .sysc = &omap2xxx_mcspi_sysc, +}; + +/* + * 'gpmc' class + * general purpose memory controller + */ + +static struct omap_hwmod_class_sysconfig omap2xxx_gpmc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_gpmc_hwmod_class = { + .name = "gpmc", + .sysc = &omap2xxx_gpmc_sysc, +}; + +/* + * IP blocks + */ + +/* L3 */ +struct omap_hwmod omap2xxx_l3_main_hwmod = { + .name = "l3_main", + .class = &l3_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* L4 CORE */ +struct omap_hwmod omap2xxx_l4_core_hwmod = { + .name = "l4_core", + .class = &l4_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* L4 WKUP */ +struct omap_hwmod omap2xxx_l4_wkup_hwmod = { + .name = "l4_wkup", + .class = &l4_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* MPU */ +struct omap_hwmod omap2xxx_mpu_hwmod = { + .name = "mpu", + .class = &mpu_hwmod_class, + .main_clk = "mpu_ck", +}; + +/* timer3 */ +struct omap_hwmod omap2xxx_timer3_hwmod = { + .name = "timer3", + .main_clk = "gpt3_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, + }, + }, + .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, +}; + +/* timer4 */ +struct omap_hwmod omap2xxx_timer4_hwmod = { + .name = "timer4", + .main_clk = "gpt4_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, + }, + }, + .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, +}; + +/* timer5 */ +struct omap_hwmod omap2xxx_timer5_hwmod = { + .name = "timer5", + .main_clk = "gpt5_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, + }, + }, + .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, +}; + +/* timer6 */ +struct omap_hwmod omap2xxx_timer6_hwmod = { + .name = "timer6", + .main_clk = "gpt6_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, + }, + }, + .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, +}; + +/* timer7 */ +struct omap_hwmod omap2xxx_timer7_hwmod = { + .name = "timer7", + .main_clk = "gpt7_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, + }, + }, + .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, +}; + +/* timer8 */ +struct omap_hwmod omap2xxx_timer8_hwmod = { + .name = "timer8", + .main_clk = "gpt8_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, + }, + }, + .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, +}; + +/* timer9 */ +struct omap_hwmod omap2xxx_timer9_hwmod = { + .name = "timer9", + .main_clk = "gpt9_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT, + }, + }, + .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, +}; + +/* timer10 */ +struct omap_hwmod omap2xxx_timer10_hwmod = { + .name = "timer10", + .main_clk = "gpt10_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT, + }, + }, + .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, +}; + +/* timer11 */ +struct omap_hwmod omap2xxx_timer11_hwmod = { + .name = "timer11", + .main_clk = "gpt11_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT, + }, + }, + .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, +}; + +/* timer12 */ +struct omap_hwmod omap2xxx_timer12_hwmod = { + .name = "timer12", + .main_clk = "gpt12_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT, + }, + }, + .class = &omap2xxx_timer_hwmod_class, + .flags = HWMOD_SET_DEFAULT_CLOCKACT, +}; + +/* wd_timer2 */ +struct omap_hwmod omap2xxx_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap2xxx_wd_timer_hwmod_class, + .main_clk = "mpu_wdt_fck", + .prcm = { + .omap2 = { + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, + }, + }, +}; + +/* UART1 */ + +struct omap_hwmod omap2xxx_uart1_hwmod = { + .name = "uart1", + .main_clk = "uart1_fck", + .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, + }, + }, + .class = &omap2_uart_class, +}; + +/* UART2 */ + +struct omap_hwmod omap2xxx_uart2_hwmod = { + .name = "uart2", + .main_clk = "uart2_fck", + .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, + }, + }, + .class = &omap2_uart_class, +}; + +/* UART3 */ + +struct omap_hwmod omap2xxx_uart3_hwmod = { + .name = "uart3", + .main_clk = "uart3_fck", + .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, + }, + }, + .class = &omap2_uart_class, +}; + +/* dss */ + +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ + { .role = "tv_clk", .clk = "dss_54m_fck" }, + { .role = "sys_clk", .clk = "dss2_fck" }, +}; + +struct omap_hwmod omap2xxx_dss_core_hwmod = { + .name = "dss_core", + .class = &omap2_dss_hwmod_class, + .main_clk = "dss1_fck", /* instead of dss_fck */ + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, +}; + +struct omap_hwmod omap2xxx_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap2_dispc_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + }, + }, + .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr, +}; + +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + +struct omap_hwmod omap2xxx_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap2_rfbi_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + }, + }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), + .flags = HWMOD_NO_IDLEST, +}; + +struct omap_hwmod omap2xxx_dss_venc_hwmod = { + .name = "dss_venc", + .class = &omap2_venc_hwmod_class, + .main_clk = "dss_54m_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + }, + }, + .flags = HWMOD_NO_IDLEST, +}; + +/* gpio1 */ +struct omap_hwmod omap2xxx_gpio1_hwmod = { + .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .class = &omap2xxx_gpio_hwmod_class, +}; + +/* gpio2 */ +struct omap_hwmod omap2xxx_gpio2_hwmod = { + .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .class = &omap2xxx_gpio_hwmod_class, +}; + +/* gpio3 */ +struct omap_hwmod omap2xxx_gpio3_hwmod = { + .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .class = &omap2xxx_gpio_hwmod_class, +}; + +/* gpio4 */ +struct omap_hwmod omap2xxx_gpio4_hwmod = { + .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .class = &omap2xxx_gpio_hwmod_class, +}; + +/* mcspi1 */ +struct omap_hwmod omap2xxx_mcspi1_hwmod = { + .name = "mcspi1", + .main_clk = "mcspi1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT, + }, + }, + .class = &omap2xxx_mcspi_class, +}; + +/* mcspi2 */ +struct omap_hwmod omap2xxx_mcspi2_hwmod = { + .name = "mcspi2", + .main_clk = "mcspi2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT, + }, + }, + .class = &omap2xxx_mcspi_class, +}; + +/* gpmc */ +struct omap_hwmod omap2xxx_gpmc_hwmod = { + .name = "gpmc", + .class = &omap2xxx_gpmc_hwmod_class, + .main_clk = "gpmc_fck", + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS, + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + }, + }, +}; + +/* RNG */ + +static struct omap_hwmod_class_sysconfig omap2_rng_sysc = { + .rev_offs = 0x3c, + .sysc_offs = 0x40, + .syss_offs = 0x44, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2_rng_hwmod_class = { + .name = "rng", + .sysc = &omap2_rng_sysc, +}; + +struct omap_hwmod omap2xxx_rng_hwmod = { + .name = "rng", + .main_clk = "l4_ck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 4, + .idlest_idle_bit = OMAP24XX_ST_RNG_SHIFT, + }, + }, + /* + * XXX The first read from the SYSSTATUS register of the RNG + * after the SYSCONFIG SOFTRESET bit is set triggers an + * imprecise external abort. It's unclear why this happens. + * Until this is analyzed, skip the IP block reset. + */ + .flags = HWMOD_INIT_NO_RESET, + .class = &omap2_rng_hwmod_class, +}; + +/* SHAM */ + +static struct omap_hwmod_class_sysconfig omap2_sham_sysc = { + .rev_offs = 0x5c, + .sysc_offs = 0x60, + .syss_offs = 0x64, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_sham_class = { + .name = "sham", + .sysc = &omap2_sham_sysc, +}; + +struct omap_hwmod omap2xxx_sham_hwmod = { + .name = "sham", + .main_clk = "l4_ck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 4, + .idlest_idle_bit = OMAP24XX_ST_SHA_SHIFT, + }, + }, + .class = &omap2xxx_sham_class, +}; + +/* AES */ + +static struct omap_hwmod_class_sysconfig omap2_aes_sysc = { + .rev_offs = 0x44, + .sysc_offs = 0x48, + .syss_offs = 0x4c, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap2xxx_aes_class = { + .name = "aes", + .sysc = &omap2_aes_sysc, +}; + +struct omap_hwmod omap2xxx_aes_hwmod = { + .name = "aes", + .main_clk = "l4_ck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .idlest_reg_id = 4, + .idlest_idle_bit = OMAP24XX_ST_AES_SHIFT, + }, + }, + .class = &omap2xxx_aes_class, +}; -- cgit v1.2.3