From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mach-omap2/pm44xx.c | 296 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 296 insertions(+) create mode 100644 arch/arm/mach-omap2/pm44xx.c (limited to 'arch/arm/mach-omap2/pm44xx.c') diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c new file mode 100644 index 000000000..f57802f3e --- /dev/null +++ b/arch/arm/mach-omap2/pm44xx.c @@ -0,0 +1,296 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * OMAP4+ Power Management Routines + * + * Copyright (C) 2010-2013 Texas Instruments, Inc. + * Rajendra Nayak + * Santosh Shilimkar + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "soc.h" +#include "common.h" +#include "clockdomain.h" +#include "powerdomain.h" +#include "pm.h" + +u16 pm44xx_errata; + +struct power_state { + struct powerdomain *pwrdm; + u32 next_state; + u32 next_logic_state; +#ifdef CONFIG_SUSPEND + u32 saved_state; + u32 saved_logic_state; +#endif + struct list_head node; +}; + +/** + * struct static_dep_map - Static dependency map + * @from: from clockdomain + * @to: to clockdomain + */ +struct static_dep_map { + const char *from; + const char *to; +}; + +static u32 cpu_suspend_state = PWRDM_POWER_OFF; + +static LIST_HEAD(pwrst_list); + +#ifdef CONFIG_SUSPEND +static int omap4_pm_suspend(void) +{ + struct power_state *pwrst; + int state, ret = 0; + u32 cpu_id = smp_processor_id(); + + /* Save current powerdomain state */ + list_for_each_entry(pwrst, &pwrst_list, node) { + pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); + pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm); + } + + /* Set targeted power domain states by suspend */ + list_for_each_entry(pwrst, &pwrst_list, node) { + omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); + pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->next_logic_state); + } + + /* + * For MPUSS to hit power domain retention(CSWR or OSWR), + * CPU0 and CPU1 power domains need to be in OFF or DORMANT state, + * since CPU power domain CSWR is not supported by hardware + * Only master CPU follows suspend path. All other CPUs follow + * CPU hotplug path in system wide suspend. On OMAP4, CPU power + * domain CSWR is not supported by hardware. + * More details can be found in OMAP4430 TRM section 4.3.4.2. + */ + omap4_enter_lowpower(cpu_id, cpu_suspend_state, false); + + /* Restore next powerdomain state */ + list_for_each_entry(pwrst, &pwrst_list, node) { + state = pwrdm_read_prev_pwrst(pwrst->pwrdm); + if (state > pwrst->next_state) { + pr_info("Powerdomain (%s) didn't enter target state %d\n", + pwrst->pwrdm->name, pwrst->next_state); + ret = -1; + } + omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); + pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state); + } + if (ret) { + pr_crit("Could not enter target state in pm_suspend\n"); + /* + * OMAP4 chip PM currently works only with certain (newer) + * versions of bootloaders. This is due to missing code in the + * kernel to properly reset and initialize some devices. + * Warn the user about the bootloader version being one of the + * possible causes. + * http://www.spinics.net/lists/arm-kernel/msg218641.html + */ + pr_warn("A possible cause could be an old bootloader - try u-boot >= v2012.07\n"); + } else { + pr_info("Successfully put all powerdomains to target state\n"); + } + + return 0; +} +#else +#define omap4_pm_suspend NULL +#endif /* CONFIG_SUSPEND */ + +static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) +{ + struct power_state *pwrst; + + if (!pwrdm->pwrsts) + return 0; + + /* + * Skip CPU0 and CPU1 power domains. CPU1 is programmed + * through hotplug path and CPU0 explicitly programmed + * further down in the code path + */ + if (!strncmp(pwrdm->name, "cpu", 3)) { + if (IS_PM44XX_ERRATUM(PM_OMAP4_CPU_OSWR_DISABLE)) + cpu_suspend_state = PWRDM_POWER_RET; + return 0; + } + + if (!strncmp(pwrdm->name, "core", 4) || + !strncmp(pwrdm->name, "l4per", 5)) + pwrdm_set_logic_retst(pwrdm, PWRDM_POWER_OFF); + + pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC); + if (!pwrst) + return -ENOMEM; + + pwrst->pwrdm = pwrdm; + pwrst->next_state = pwrdm_get_valid_lp_state(pwrdm, false, + PWRDM_POWER_RET); + pwrst->next_logic_state = pwrdm_get_valid_lp_state(pwrdm, true, + PWRDM_POWER_OFF); + + list_add(&pwrst->node, &pwrst_list); + + return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state); +} + +/** + * omap_default_idle - OMAP4 default ilde routine.' + * + * Implements OMAP4 memory, IO ordering requirements which can't be addressed + * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPU_IDLE and + * by secondary CPU with CONFIG_CPU_IDLE. + */ +static void omap_default_idle(void) +{ + omap_do_wfi(); +} + +/* + * The dynamic dependency between MPUSS -> MEMIF and + * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as + * expected. The hardware recommendation is to enable static + * dependencies for these to avoid system lock ups or random crashes. + * The L4 wakeup depedency is added to workaround the OCP sync hardware + * BUG with 32K synctimer which lead to incorrect timer value read + * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which + * are part of L4 wakeup clockdomain. + */ +static const struct static_dep_map omap4_static_dep_map[] = { + {.from = "mpuss_clkdm", .to = "l3_emif_clkdm"}, + {.from = "mpuss_clkdm", .to = "l3_1_clkdm"}, + {.from = "mpuss_clkdm", .to = "l3_2_clkdm"}, + {.from = "ducati_clkdm", .to = "l3_1_clkdm"}, + {.from = "ducati_clkdm", .to = "l3_2_clkdm"}, + {.from = NULL} /* TERMINATION */ +}; + +static const struct static_dep_map omap5_dra7_static_dep_map[] = { + {.from = "mpu_clkdm", .to = "emif_clkdm"}, + {.from = NULL} /* TERMINATION */ +}; + +/** + * omap4plus_init_static_deps() - Initialize a static dependency map + * @map: Mapping of clock domains + */ +static inline int omap4plus_init_static_deps(const struct static_dep_map *map) +{ + int ret; + struct clockdomain *from, *to; + + if (!map) + return 0; + + while (map->from) { + from = clkdm_lookup(map->from); + to = clkdm_lookup(map->to); + if (!from || !to) { + pr_err("Failed lookup %s or %s for wakeup dependency\n", + map->from, map->to); + return -EINVAL; + } + ret = clkdm_add_wkdep(from, to); + if (ret) { + pr_err("Failed to add %s -> %s wakeup dependency(%d)\n", + map->from, map->to, ret); + return ret; + } + + map++; + } + + return 0; +} + +/** + * omap4_pm_init_early - Does early initialization necessary for OMAP4+ devices + * + * Initializes basic stuff for power management functionality. + */ +int __init omap4_pm_init_early(void) +{ + if (cpu_is_omap446x()) + pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD; + + if (soc_is_omap54xx() || soc_is_dra7xx()) + pm44xx_errata |= PM_OMAP4_CPU_OSWR_DISABLE; + + return 0; +} + +/** + * omap4_pm_init - Init routine for OMAP4+ devices + * + * Initializes all powerdomain and clockdomain target states + * and all PRCM settings. + * Return: Returns the error code returned by called functions. + */ +int __init omap4_pm_init(void) +{ + int ret = 0; + + if (omap_rev() == OMAP4430_REV_ES1_0) { + WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); + return -ENODEV; + } + + pr_info("Power Management for TI OMAP4+ devices.\n"); + + /* + * OMAP4 chip PM currently works only with certain (newer) + * versions of bootloaders. This is due to missing code in the + * kernel to properly reset and initialize some devices. + * http://www.spinics.net/lists/arm-kernel/msg218641.html + */ + if (cpu_is_omap44xx()) + pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n"); + + ret = pwrdm_for_each(pwrdms_setup, NULL); + if (ret) { + pr_err("Failed to setup powerdomains.\n"); + goto err2; + } + + if (cpu_is_omap44xx()) + ret = omap4plus_init_static_deps(omap4_static_dep_map); + else if (soc_is_omap54xx() || soc_is_dra7xx()) + ret = omap4plus_init_static_deps(omap5_dra7_static_dep_map); + + if (ret) { + pr_err("Failed to initialise static dependencies.\n"); + goto err2; + } + + ret = omap4_mpuss_init(); + if (ret) { + pr_err("Failed to initialise OMAP4 MPUSS\n"); + goto err2; + } + + (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); + + omap_common_suspend_init(omap4_pm_suspend); + + /* Overwrite the default cpu_do_idle() */ + arm_pm_idle = omap_default_idle; + + if (cpu_is_omap44xx() || soc_is_omap54xx()) + omap4_idle_init(); + +err2: + return ret; +} -- cgit v1.2.3