From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mach-omap2/sr_device.c | 210 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 210 insertions(+) create mode 100644 arch/arm/mach-omap2/sr_device.c (limited to 'arch/arm/mach-omap2/sr_device.c') diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c new file mode 100644 index 000000000..d2133423b --- /dev/null +++ b/arch/arm/mach-omap2/sr_device.c @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * OMAP3/OMAP4 smartreflex device file + * + * Author: Thara Gopinath + * + * Based originally on code from smartreflex.c + * Copyright (C) 2010 Texas Instruments, Inc. + * Thara Gopinath + * + * Copyright (C) 2008 Nokia Corporation + * Kalle Jokiniemi + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Lesly A M + */ +#include + +#include +#include +#include + +#include "soc.h" +#include "omap_device.h" +#include "voltage.h" +#include "control.h" +#include "pm.h" + +/* Read EFUSE values from control registers for OMAP3430 */ +static void __init sr_set_nvalues(struct omap_volt_data *volt_data, + struct omap_sr_data *sr_data) +{ + struct omap_sr_nvalue_table *nvalue_table; + int i, j, count = 0; + + sr_data->nvalue_count = 0; + sr_data->nvalue_table = NULL; + + while (volt_data[count].volt_nominal) + count++; + + nvalue_table = kcalloc(count, sizeof(*nvalue_table), GFP_KERNEL); + if (!nvalue_table) + return; + + for (i = 0, j = 0; i < count; i++) { + u32 v; + + /* + * In OMAP4 the efuse registers are 24 bit aligned. + * A readl_relaxed will fail for non-32 bit aligned address + * and hence the 8-bit read and shift. + */ + if (cpu_is_omap44xx()) { + u16 offset = volt_data[i].sr_efuse_offs; + + v = omap_ctrl_readb(offset) | + omap_ctrl_readb(offset + 1) << 8 | + omap_ctrl_readb(offset + 2) << 16; + } else { + v = omap_ctrl_readl(volt_data[i].sr_efuse_offs); + } + + /* + * Many OMAP SoCs don't have the eFuse values set. + * For example, pretty much all OMAP3xxx before + * ES3.something. + * + * XXX There needs to be some way for board files or + * userspace to add these in. + */ + if (v == 0) + continue; + + nvalue_table[j].nvalue = v; + nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs; + nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit; + nvalue_table[j].volt_nominal = volt_data[i].volt_nominal; + + j++; + } + + sr_data->nvalue_table = nvalue_table; + sr_data->nvalue_count = j; +} + +extern struct omap_sr_data omap_sr_pdata[]; + +static int __init sr_init_by_name(const char *name, const char *voltdm) +{ + struct omap_sr_data *sr_data = NULL; + struct omap_volt_data *volt_data; + static int i; + + if (!strncmp(name, "smartreflex_mpu_iva", 20) || + !strncmp(name, "smartreflex_mpu", 16)) + sr_data = &omap_sr_pdata[OMAP_SR_MPU]; + else if (!strncmp(name, "smartreflex_core", 17)) + sr_data = &omap_sr_pdata[OMAP_SR_CORE]; + else if (!strncmp(name, "smartreflex_iva", 16)) + sr_data = &omap_sr_pdata[OMAP_SR_IVA]; + + if (!sr_data) { + pr_err("%s: Unknown instance %s\n", __func__, name); + return -EINVAL; + } + + sr_data->name = name; + if (cpu_is_omap343x()) + sr_data->ip_type = 1; + else + sr_data->ip_type = 2; + sr_data->senn_mod = 0x1; + sr_data->senp_mod = 0x1; + + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + sr_data->err_weight = OMAP3430_SR_ERRWEIGHT; + sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT; + sr_data->accum_data = OMAP3430_SR_ACCUMDATA; + if (!(strcmp(sr_data->name, "smartreflex_mpu"))) { + sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT; + sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT; + } else { + sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT; + sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT; + } + } + + sr_data->voltdm = voltdm_lookup(voltdm); + if (!sr_data->voltdm) { + pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", + __func__, voltdm); + goto exit; + } + + omap_voltage_get_volttable(sr_data->voltdm, &volt_data); + if (!volt_data) { + pr_err("%s: No Voltage table registered for VDD%d\n", + __func__, i + 1); + goto exit; + } + + sr_set_nvalues(volt_data, sr_data); + +exit: + i++; + + return 0; +} + +#ifdef CONFIG_OMAP_HWMOD +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +{ + struct omap_smartreflex_dev_attr *sr_dev_attr; + + sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; + if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { + pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", + __func__, oh->name); + return 0; + } + + return sr_init_by_name(oh->name, sr_dev_attr->sensor_voltdm_name); +} +#else +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +{ + return -EINVAL; +} +#endif + +static const char * const omap4_sr_instances[] = { + "mpu", + "iva", + "core", +}; + +static const char * const dra7_sr_instances[] = { + "mpu", + "core", +}; + +int __init omap_devinit_smartreflex(void) +{ + const char * const *sr_inst = NULL; + int i, nr_sr = 0; + + if (soc_is_omap44xx()) { + sr_inst = omap4_sr_instances; + nr_sr = ARRAY_SIZE(omap4_sr_instances); + + } else if (soc_is_dra7xx()) { + sr_inst = dra7_sr_instances; + nr_sr = ARRAY_SIZE(dra7_sr_instances); + } + + if (nr_sr) { + const char *name, *voltdm; + + for (i = 0; i < nr_sr; i++) { + name = kasprintf(GFP_KERNEL, "smartreflex_%s", sr_inst[i]); + voltdm = sr_inst[i]; + sr_init_by_name(name, voltdm); + } + + return 0; + } + + return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL); +} -- cgit v1.2.3