From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mach-s5pv210/pm.c | 214 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 214 insertions(+) create mode 100644 arch/arm/mach-s5pv210/pm.c (limited to 'arch/arm/mach-s5pv210/pm.c') diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c new file mode 100644 index 000000000..d59c094cd --- /dev/null +++ b/arch/arm/mach-s5pv210/pm.c @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2010-2014 Samsung Electronics Co., Ltd. +// http://www.samsung.com +// +// S5PV210 - Power Management support +// +// Based on arch/arm/mach-s3c2410/pm.c +// Copyright (c) 2006 Simtec Electronics +// Ben Dooks + +#include +#include +#include +#include +#include + +#include +#include + +#include "common.h" +#include "regs-clock.h" + +/* helper functions to save and restore register state */ +struct sleep_save { + void __iomem *reg; + unsigned long val; +}; + +#define SAVE_ITEM(x) \ + { .reg = (x) } + +/** + * s3c_pm_do_save() - save a set of registers for restoration on resume. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Run through the list of registers given, saving their contents in the + * array for later restoration when we wakeup. + */ +static void s3c_pm_do_save(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + ptr->val = readl_relaxed(ptr->reg); + S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val); + } +} + +/** + * s3c_pm_do_restore() - restore register values from the save list. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Restore the register values saved from s3c_pm_do_save(). + * + * WARNING: Do not put any debug in here that may effect memory or use + * peripherals, as things may be changing! +*/ + +static void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) + writel_relaxed(ptr->val, ptr->reg); +} + +static struct sleep_save s5pv210_core_save[] = { + /* Clock ETC */ + SAVE_ITEM(S5P_MDNIE_SEL), +}; + +/* + * VIC wake-up support (TODO) + */ +static u32 s5pv210_irqwake_intmask = 0xffffffff; + +static u32 s5pv210_read_eint_wakeup_mask(void) +{ + return __raw_readl(S5P_EINT_WAKEUP_MASK); +} + +/* + * Suspend helpers. + */ +static int s5pv210_cpu_suspend(unsigned long arg) +{ + unsigned long tmp; + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 5\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + "wfi" : : "r" (tmp)); + + pr_info("Failed to suspend the system\n"); + return 1; /* Aborting suspend */ +} + +static void s5pv210_pm_prepare(void) +{ + unsigned int tmp; + + /* + * Set wake-up mask registers + * S5P_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend. + */ + __raw_writel(s5pv210_irqwake_intmask, S5P_WAKEUP_MASK); + + /* ensure at least INFORM0 has the resume address */ + __raw_writel(__pa_symbol(s5pv210_cpu_resume), S5P_INFORM0); + + tmp = __raw_readl(S5P_SLEEP_CFG); + tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN); + __raw_writel(tmp, S5P_SLEEP_CFG); + + /* WFI for SLEEP mode configuration by SYSCON */ + tmp = __raw_readl(S5P_PWR_CFG); + tmp &= S5P_CFG_WFI_CLEAN; + tmp |= S5P_CFG_WFI_SLEEP; + __raw_writel(tmp, S5P_PWR_CFG); + + /* SYSCON interrupt handling disable */ + tmp = __raw_readl(S5P_OTHERS); + tmp |= S5P_OTHER_SYSC_INTOFF; + __raw_writel(tmp, S5P_OTHERS); + + s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); +} + +/* + * Suspend operations. + */ +static int s5pv210_suspend_enter(suspend_state_t state) +{ + u32 eint_wakeup_mask = s5pv210_read_eint_wakeup_mask(); + int ret; + + S3C_PMDBG("%s: suspending the system...\n", __func__); + + S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__, + s5pv210_irqwake_intmask, eint_wakeup_mask); + + if (s5pv210_irqwake_intmask == -1U + && eint_wakeup_mask == -1U) { + pr_err("%s: No wake-up sources!\n", __func__); + pr_err("%s: Aborting sleep\n", __func__); + return -EINVAL; + } + + s3c_pm_save_uarts(false); + s5pv210_pm_prepare(); + flush_cache_all(); + s3c_pm_check_store(); + + ret = cpu_suspend(0, s5pv210_cpu_suspend); + if (ret) + return ret; + + s3c_pm_restore_uarts(false); + + S3C_PMDBG("%s: wakeup stat: %08x\n", __func__, + __raw_readl(S5P_WAKEUP_STAT)); + + s3c_pm_check_restore(); + + S3C_PMDBG("%s: resuming the system...\n", __func__); + + return 0; +} + +static int s5pv210_suspend_prepare(void) +{ + s3c_pm_check_prepare(); + + return 0; +} + +static void s5pv210_suspend_finish(void) +{ + s3c_pm_check_cleanup(); +} + +static const struct platform_suspend_ops s5pv210_suspend_ops = { + .enter = s5pv210_suspend_enter, + .prepare = s5pv210_suspend_prepare, + .finish = s5pv210_suspend_finish, + .valid = suspend_valid_only_mem, +}; + +/* + * Syscore operations used to delay restore of certain registers. + */ +static void s5pv210_pm_resume(void) +{ + s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); +} + +static struct syscore_ops s5pv210_pm_syscore_ops = { + .resume = s5pv210_pm_resume, +}; + +/* + * Initialization entry point. + */ +void __init s5pv210_pm_init(void) +{ + register_syscore_ops(&s5pv210_pm_syscore_ops); + suspend_set_ops(&s5pv210_suspend_ops); +} -- cgit v1.2.3