From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mach-sti/Kconfig | 57 ++++++++++++++++++++++++ arch/arm/mach-sti/Makefile | 3 ++ arch/arm/mach-sti/board-dt.c | 31 ++++++++++++++ arch/arm/mach-sti/platsmp.c | 100 +++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-sti/smp.h | 16 +++++++ 5 files changed, 207 insertions(+) create mode 100644 arch/arm/mach-sti/Kconfig create mode 100644 arch/arm/mach-sti/Makefile create mode 100644 arch/arm/mach-sti/board-dt.c create mode 100644 arch/arm/mach-sti/platsmp.c create mode 100644 arch/arm/mach-sti/smp.h (limited to 'arch/arm/mach-sti') diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig new file mode 100644 index 000000000..b2d45cf10 --- /dev/null +++ b/arch/arm/mach-sti/Kconfig @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_STI + bool "STMicroelectronics Consumer Electronics SOCs" + depends on ARCH_MULTI_V7 + select ARM_GIC + select ST_IRQCHIP + select ARM_GLOBAL_TIMER + select CLKSRC_ST_LPC + select PINCTRL + select PINCTRL_ST + select MFD_SYSCON + select ARCH_HAS_RESET_CONTROLLER + select HAVE_ARM_SCU if SMP + select GPIOLIB + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_775420 + select PL310_ERRATA_753970 if CACHE_L2X0 + select PL310_ERRATA_769419 if CACHE_L2X0 + select RESET_CONTROLLER + help + Include support for STMicroelectronics' STiH415/416, STiH407/10 and + STiH418 family SoCs using the Device Tree for discovery. More + information can be found in Documentation/arm/sti/ and + Documentation/devicetree. + +if ARCH_STI + +config SOC_STIH415 + bool "STiH415 STMicroelectronics Consumer Electronics family" + default y + help + This enables support for STMicroelectronics Digital Consumer + Electronics family StiH415 parts, primarily targeted at set-top-box + and other digital audio/video applications using Flattned Device + Trees. + +config SOC_STIH416 + bool "STiH416 STMicroelectronics Consumer Electronics family" + default y + help + This enables support for STMicroelectronics Digital Consumer + Electronics family StiH416 parts, primarily targeted at set-top-box + and other digital audio/video applications using Flattened Device + Trees. + +config SOC_STIH407 + bool "STiH407 STMicroelectronics Consumer Electronics family" + default y + select STIH407_RESET + help + This enables support for STMicroelectronics Digital Consumer + Electronics family StiH407 parts, targetted at set-top-box + and other digital audio/video applications using Flattened Device + Trees. + +endif diff --git a/arch/arm/mach-sti/Makefile b/arch/arm/mach-sti/Makefile new file mode 100644 index 000000000..7e2a58257 --- /dev/null +++ b/arch/arm/mach-sti/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_SMP) += platsmp.o +obj-$(CONFIG_ARCH_STI) += board-dt.o diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c new file mode 100644 index 000000000..ffecbf296 --- /dev/null +++ b/arch/arm/mach-sti/board-dt.c @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author(s): Srinivas Kandagatla + */ + +#include +#include +#include +#include + +#include "smp.h" + +static const char *const stih41x_dt_match[] __initconst = { + "st,stih415", + "st,stih416", + "st,stih407", + "st,stih410", + "st,stih418", + NULL +}; + +DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree") + .dt_compat = stih41x_dt_match, + .l2c_aux_val = L2C_AUX_CTRL_SHARED_OVERRIDE | + L310_AUX_CTRL_DATA_PREFETCH | + L310_AUX_CTRL_INSTR_PREFETCH | + L2C_AUX_CTRL_WAY_SIZE(4), + .l2c_aux_mask = 0xc0000fff, + .smp = smp_ops(sti_smp_ops), +MACHINE_END diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c new file mode 100644 index 000000000..e2ba04b56 --- /dev/null +++ b/arch/arm/mach-sti/platsmp.c @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * arch/arm/mach-sti/platsmp.c + * + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * http://www.st.com + * + * Cloned from linux/arch/arm/mach-vexpress/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "smp.h" + +static u32 __iomem *cpu_strt_ptr; + +static int sti_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long entry_pa = __pa_symbol(secondary_startup); + + /* + * Secondary CPU is initialised and started by a U-BOOTROM firmware. + * Secondary CPU is spinning and waiting for a write at cpu_strt_ptr. + * Writing secondary_startup address at cpu_strt_ptr makes it to + * jump directly to secondary_startup(). + */ + __raw_writel(entry_pa, cpu_strt_ptr); + + /* wmb so that data is actually written before cache flush is done */ + smp_wmb(); + sync_cache_w(cpu_strt_ptr); + + return 0; +} + +static void __init sti_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *np; + void __iomem *scu_base; + u32 release_phys; + int cpu; + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + + if (np) { + scu_base = of_iomap(np, 0); + scu_enable(scu_base); + of_node_put(np); + } + + if (max_cpus <= 1) + return; + + for_each_possible_cpu(cpu) { + + np = of_get_cpu_node(cpu, NULL); + + if (!np) + continue; + + if (of_property_read_u32(np, "cpu-release-addr", + &release_phys)) { + pr_err("CPU %d: missing or invalid cpu-release-addr " + "property\n", cpu); + continue; + } + + /* + * cpu-release-addr is usually configured in SBC DMEM but can + * also be in RAM. + */ + + if (!memblock_is_memory(release_phys)) + cpu_strt_ptr = + ioremap(release_phys, sizeof(release_phys)); + else + cpu_strt_ptr = + (u32 __iomem *)phys_to_virt(release_phys); + + set_cpu_possible(cpu, true); + } +} + +const struct smp_operations sti_smp_ops __initconst = { + .smp_prepare_cpus = sti_smp_prepare_cpus, + .smp_boot_secondary = sti_boot_secondary, +}; diff --git a/arch/arm/mach-sti/smp.h b/arch/arm/mach-sti/smp.h new file mode 100644 index 000000000..23e929d83 --- /dev/null +++ b/arch/arm/mach-sti/smp.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * arch/arm/mach-sti/smp.h + * + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * http://www.st.com + */ + +#ifndef __MACH_STI_SMP_H +#define __MACH_STI_SMP_H + +extern const struct smp_operations sti_smp_ops; + +void sti_secondary_startup(void); + +#endif -- cgit v1.2.3