From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mach-versatile/Kconfig | 326 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 326 insertions(+) create mode 100644 arch/arm/mach-versatile/Kconfig (limited to 'arch/arm/mach-versatile/Kconfig') diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig new file mode 100644 index 000000000..b1519b4dc --- /dev/null +++ b/arch/arm/mach-versatile/Kconfig @@ -0,0 +1,326 @@ +# SPDX-License-Identifier: GPL-2.0 +config ARCH_VERSATILE + bool "ARM Ltd. Versatile family" + depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select ARM_AMBA + select ARM_TIMER_SP804 + select ARM_VIC + select CLKSRC_VERSATILE + select CPU_ARM926T + select CLK_ICST + select MFD_SYSCON + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VERSATILE + select VERSATILE_FPGA_IRQ + help + This enables support for ARM Ltd Versatile board. + +menuconfig ARCH_INTEGRATOR + bool "ARM Ltd. Integrator family" + depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 + depends on CPU_LITTLE_ENDIAN || ARCH_MULTI_V6 + select ARM_AMBA + select CMA + select DMA_CMA + select HAVE_TCM + select CLK_ICST + select MFD_SYSCON + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VERSATILE + select POWER_SUPPLY + select SOC_INTEGRATOR_CM + select VERSATILE_FPGA_IRQ + help + Support for ARM's Integrator platform. + +if ARCH_INTEGRATOR + +config ARCH_INTEGRATOR_AP + bool "Support Integrator/AP and Integrator/PP2 platforms" + select INTEGRATOR_AP_TIMER + select SERIAL_AMBA_PL010 if TTY + select SERIAL_AMBA_PL010_CONSOLE if TTY + select SOC_BUS + help + Include support for the ARM(R) Integrator/AP and + Integrator/PP2 platforms. + +config INTEGRATOR_IMPD1 + bool "Include support for Integrator/IM-PD1" + depends on ARCH_INTEGRATOR_AP + select ARM_VIC + select GPIO_PL061 + select GPIOLIB + select REGULATOR + select REGULATOR_FIXED_VOLTAGE + help + The IM-PD1 is an add-on logic module for the Integrator which + allows ARM(R) Ltd PrimeCells to be developed and evaluated. + The IM-PD1 can be found on the Integrator/PP2 platform. + +config INTEGRATOR_CM720T + bool "Integrator/CM720T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T + select CPU_ARM720T + +config INTEGRATOR_CM920T + bool "Integrator/CM920T core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V4T + select CPU_ARM920T + +config INTEGRATOR_CM922T_XA10 + bool "Integrator/CM922T-XA10 core module" + depends on ARCH_MULTI_V4T + depends on ARCH_INTEGRATOR_AP + select CPU_ARM922T + +config INTEGRATOR_CM926EJS + bool "Integrator/CM926EJ-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM926T + +config INTEGRATOR_CM10200E_REV0 + bool "Integrator/CM10200E rev.0 core module" + depends on ARCH_INTEGRATOR_AP && n + depends on ARCH_MULTI_V5 + select CPU_ARM1020 + +config INTEGRATOR_CM10200E + bool "Integrator/CM10200E core module" + depends on ARCH_INTEGRATOR_AP && n + depends on ARCH_MULTI_V5 + select CPU_ARM1020E + +config INTEGRATOR_CM10220E + bool "Integrator/CM10220E core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM1022 + +config INTEGRATOR_CM1026EJS + bool "Integrator/CM1026EJ-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V5 + select CPU_ARM1026 + +config INTEGRATOR_CM1136JFS + bool "Integrator/CM1136JF-S core module" + depends on ARCH_INTEGRATOR_AP + depends on ARCH_MULTI_V6 + select CPU_V6 + +config ARCH_INTEGRATOR_CP + bool "Support Integrator/CP platform" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 + select ARM_TIMER_SP804 + select SERIAL_AMBA_PL011 if TTY + select SERIAL_AMBA_PL011_CONSOLE if TTY + select SOC_BUS + help + Include support for the ARM(R) Integrator CP platform. + +config INTEGRATOR_CT926 + bool "Integrator/CT926 (ARM926EJ-S) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V5 + select CPU_ARM926T + +config INTEGRATOR_CTB36 + bool "Integrator/CTB36 (ARM1136JF-S) core tile" + depends on ARCH_INTEGRATOR_CP + depends on ARCH_MULTI_V6 + select CPU_V6 + +config ARCH_CINTEGRATOR + depends on ARCH_INTEGRATOR_CP + def_bool y + +endif + +menuconfig ARCH_REALVIEW + bool "ARM Ltd. RealView family" + depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select CLK_SP810 + select GPIO_PL061 if GPIOLIB + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select HAVE_PATA_PLATFORM + select HAVE_TCM + select CLK_ICST + select MACH_REALVIEW_EB if ARCH_MULTI_V5 + select MFD_SYSCON + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VERSATILE + select POWER_SUPPLY + select SOC_REALVIEW + help + This enables support for ARM Ltd RealView boards. + +if ARCH_REALVIEW + +config MACH_REALVIEW_EB + bool "Support RealView(R) Emulation Baseboard" + select ARM_GIC + select CPU_ARM926T if ARCH_MULTI_V5 + help + Include support for the ARM(R) RealView(R) Emulation Baseboard + platform. On an ARMv5 kernel, this will include support for + the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least + one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore + core tile options should be enabled. + +config REALVIEW_EB_ARM1136 + bool "Support ARM1136J(F)-S Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + select CPU_V6 + help + Enable support for the ARM1136 tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_ARM1176 + bool "Support ARM1176JZ(F)-S Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + help + Enable support for the ARM1176 tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_A9MP + bool "Support Multicore Cortex-A9 Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V7 + help + Enable support for the Cortex-A9MPCore tile fitted to the + Realview(R) Emulation Baseboard platform. + +config REALVIEW_EB_ARM11MP + bool "Support ARM11MPCore Tile" + depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 + select HAVE_SMP + help + Enable support for the ARM11MPCore tile fitted to the Realview(R) + Emulation Baseboard platform. + +config MACH_REALVIEW_PB11MP + bool "Support RealView(R) Platform Baseboard for ARM11MPCore" + depends on ARCH_MULTI_V6 + select HAVE_SMP + help + Include support for the ARM(R) RealView(R) Platform Baseboard for + the ARM11MPCore. This platform has an on-board ARM11MPCore and has + support for PCI-E and Compact Flash. + +# ARMv6 CPU without K extensions, but does have the new exclusive ops +config MACH_REALVIEW_PB1176 + bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" + depends on ARCH_MULTI_V6 + select CPU_V6 + select HAVE_TCM + help + Include support for the ARM(R) RealView(R) Platform Baseboard for + ARM1176JZF-S. + +config MACH_REALVIEW_PBA8 + bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" + depends on ARCH_MULTI_V7 + help + Include support for the ARM(R) RealView Platform Baseboard for + Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has + support for PCI-E and Compact Flash. + +config MACH_REALVIEW_PBX + bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9" + depends on ARCH_MULTI_V7 + select ZONE_DMA + help + Include support for the ARM(R) RealView(R) Platform Baseboard + Explore. + +endif + +menuconfig ARCH_VEXPRESS + bool "ARM Ltd. Versatile Express family" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_GLOBAL_TIMER + select ARM_TIMER_SP804 + select GPIOLIB + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select CLK_ICST + select NO_IOPORT_MAP + select PLAT_VERSATILE + select POWER_RESET + select POWER_RESET_VEXPRESS + select POWER_SUPPLY + select REGULATOR if MMC_ARMMMCI + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select VEXPRESS_CONFIG + help + This option enables support for systems using Cortex processor based + ARM core and logic (FPGA) tiles on the Versatile Express motherboard, + for example: + + - CoreTile Express A5x2 (V2P-CA5s) + - CoreTile Express A9x4 (V2P-CA9) + - CoreTile Express A15x2 (V2P-CA15) + - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs + (Soft Macrocell Models) + - Versatile Express RTSMs (Models) + + You must boot using a Flattened Device Tree in order to use these + platforms. The traditional (ATAGs) boot method is not usable on + these boards with this option. + +if ARCH_VEXPRESS + +config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA + bool "Enable A5 and A9 only errata work-arounds" + default y + select ARM_ERRATA_643719 if SMP + select ARM_ERRATA_720789 + select PL310_ERRATA_753970 if CACHE_L2X0 + help + Provides common dependencies for Versatile Express platforms + based on Cortex-A5 and Cortex-A9 processors. In order to + build a working kernel, you must also enable relevant core + tile support or Flattened Device Tree based support options. + +config ARCH_VEXPRESS_DCSCB + bool "Dual Cluster System Control Block (DCSCB) support" + depends on MCPM + select ARM_CCI400_PORT_CTRL + help + Support for the Dual Cluster System Configuration Block (DCSCB). + This is needed to provide CPU and cluster power management + on RTSM implementing big.LITTLE. + +config ARCH_VEXPRESS_SPC + bool "Versatile Express Serial Power Controller (SPC)" + select PM_OPP + help + The TC2 (A15x2 A7x3) versatile express core tile integrates a logic + block called Serial Power Controller (SPC) that provides the interface + between the dual cluster test-chip and the M3 microcontroller that + carries out power management. + +config ARCH_VEXPRESS_TC2_PM + bool "Versatile Express TC2 power management" + depends on MCPM + select ARM_CCI400_PORT_CTRL + select ARCH_VEXPRESS_SPC + select ARM_CPU_SUSPEND + help + Support for CPU and cluster power management on Versatile Express + with a TC2 (A15x2 A7x3) big.LITTLE core tile. + +endif -- cgit v1.2.3