From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/mm/proc-arm720.S | 205 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 205 insertions(+) create mode 100644 arch/arm/mm/proc-arm720.S (limited to 'arch/arm/mm/proc-arm720.S') diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S new file mode 100644 index 000000000..3b687e6dd --- /dev/null +++ b/arch/arm/mm/proc-arm720.S @@ -0,0 +1,205 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * linux/arch/arm/mm/proc-arm720.S: MMU functions for ARM720 + * + * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) + * Rob Scott (rscott@mtrob.fdns.net) + * Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd. + * hacked for non-paged-MM by Hyok S. Choi, 2004. + * + * These are the low level assembler for performing cache and TLB + * functions on the ARM720T. The ARM720T has a writethrough IDC + * cache, so we don't need to clean it. + * + * Changelog: + * 05-09-2000 SJH Created by moving 720 specific functions + * out of 'proc-arm6,7.S' per RMK discussion + * 07-25-2000 SJH Added idle function. + * 08-25-2000 DBS Updated for integration of ARM Ltd version. + * 04-20-2004 HSC modified for non-paged memory management mode. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "proc-macros.S" + +/* + * Function: arm720_proc_init (void) + * : arm720_proc_fin (void) + * + * Notes : This processor does not require these + */ +ENTRY(cpu_arm720_dcache_clean_area) +ENTRY(cpu_arm720_proc_init) + ret lr + +ENTRY(cpu_arm720_proc_fin) + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x1000 @ ...i............ + bic r0, r0, #0x000e @ ............wca. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ret lr + +/* + * Function: arm720_proc_do_idle(void) + * Params : r0 = unused + * Purpose : put the processor in proper idle mode + */ +ENTRY(cpu_arm720_do_idle) + ret lr + +/* + * Function: arm720_switch_mm(unsigned long pgd_phys) + * Params : pgd_phys Physical address of page table + * Purpose : Perform a task switch, saving the old process' state and restoring + * the new. + */ +ENTRY(cpu_arm720_switch_mm) +#ifdef CONFIG_MMU + mov r1, #0 + mcr p15, 0, r1, c7, c7, 0 @ invalidate cache + mcr p15, 0, r0, c2, c0, 0 @ update page table ptr + mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4) +#endif + ret lr + +/* + * Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext) + * Params : r0 = Address to set + * : r1 = value to set + * Purpose : Set a PTE and flush it out of any WB cache + */ + .align 5 +ENTRY(cpu_arm720_set_pte_ext) +#ifdef CONFIG_MMU + armv3_set_pte_ext wc_disable=0 +#endif + ret lr + +/* + * Function: arm720_reset + * Params : r0 = address to jump to + * Notes : This sets up everything for a reset + */ + .pushsection .idmap.text, "ax" +ENTRY(cpu_arm720_reset) + mov ip, #0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate cache +#ifdef CONFIG_MMU + mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4) +#endif + mrc p15, 0, ip, c1, c0, 0 @ get ctrl register + bic ip, ip, #0x000f @ ............wcam + bic ip, ip, #0x2100 @ ..v....s........ + mcr p15, 0, ip, c1, c0, 0 @ ctrl register + ret r0 +ENDPROC(cpu_arm720_reset) + .popsection + + .type __arm710_setup, #function +__arm710_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c7, 0 @ invalidate caches +#ifdef CONFIG_MMU + mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4) +#endif + mrc p15, 0, r0, c1, c0 @ get control register + ldr r5, arm710_cr1_clear + bic r0, r0, r5 + ldr r5, arm710_cr1_set + orr r0, r0, r5 + ret lr @ __ret (head.S) + .size __arm710_setup, . - __arm710_setup + + /* + * R + * .RVI ZFRS BLDP WCAM + * .... 0001 ..11 1101 + * + */ + .type arm710_cr1_clear, #object + .type arm710_cr1_set, #object +arm710_cr1_clear: + .word 0x0f3f +arm710_cr1_set: + .word 0x013d + + .type __arm720_setup, #function +__arm720_setup: + mov r0, #0 + mcr p15, 0, r0, c7, c7, 0 @ invalidate caches +#ifdef CONFIG_MMU + mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4) +#endif + adr r5, arm720_crval + ldmia r5, {r5, r6} + mrc p15, 0, r0, c1, c0 @ get control register + bic r0, r0, r5 + orr r0, r0, r6 + ret lr @ __ret (head.S) + .size __arm720_setup, . - __arm720_setup + + /* + * R + * .RVI ZFRS BLDP WCAM + * ..1. 1001 ..11 1101 + * + */ + .type arm720_crval, #object +arm720_crval: + crval clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130 + + __INITDATA + @ define struct processor (see and proc-macros.S) + define_processor_functions arm720, dabort=v4t_late_abort, pabort=legacy_pabort + + .section ".rodata" + + string cpu_arch_name, "armv4t" + string cpu_elf_name, "v4" + string cpu_arm710_name, "ARM710T" + string cpu_arm720_name, "ARM720T" + + .align + +/* + * See for a definition of this structure. + */ + + .section ".proc.info.init", "a" + +.macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req + .type __\name\()_proc_info,#object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + initfn \cpu_flush, __\name\()_proc_info @ cpu_flush + .long cpu_arch_name @ arch_name + .long cpu_elf_name @ elf_name + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap + .long \cpu_name + .long arm720_processor_functions + .long v4_tlb_fns + .long v4wt_user_fns + .long v4_cache_fns + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm + + arm720_proc_info arm710, 0x41807100, 0xffffff00, cpu_arm710_name, __arm710_setup + arm720_proc_info arm720, 0x41807200, 0xffffff00, cpu_arm720_name, __arm720_setup -- cgit v1.2.3