From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm/nwfpe/softfloat-specialize | 367 ++++++++++++++++++++++++++++++++++++ 1 file changed, 367 insertions(+) create mode 100644 arch/arm/nwfpe/softfloat-specialize (limited to 'arch/arm/nwfpe/softfloat-specialize') diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize new file mode 100644 index 000000000..679a0269d --- /dev/null +++ b/arch/arm/nwfpe/softfloat-specialize @@ -0,0 +1,367 @@ + +/* +=============================================================================== + +This C source fragment is part of the SoftFloat IEC/IEEE Floating-point +Arithmetic Package, Release 2. + +Written by John R. Hauser. This work was made possible in part by the +International Computer Science Institute, located at Suite 600, 1947 Center +Street, Berkeley, California 94704. Funding was partially provided by the +National Science Foundation under grant MIP-9311980. The original version +of this code was written as part of a project to build a fixed-point vector +processor in collaboration with the University of California at Berkeley, +overseen by Profs. Nelson Morgan and John Wawrzynek. More information +is available through the Web page +http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt + +THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort +has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT +TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO +PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY +AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE. + +Derivative works are acceptable, even for commercial purposes, so long as +(1) they include prominent notice that the work is derivative, and (2) they +include prominent notice akin to these three paragraphs for those parts of +this code that are retained. + +=============================================================================== +*/ + +/* +------------------------------------------------------------------------------- +Underflow tininess-detection mode, statically initialized to default value. +(The declaration in `softfloat.h' must match the `int8' type here.) +------------------------------------------------------------------------------- +*/ +int8 float_detect_tininess = float_tininess_after_rounding; + +/* +------------------------------------------------------------------------------- +Raises the exceptions specified by `flags'. Floating-point traps can be +defined here if desired. It is currently not possible for such a trap to +substitute a result value. If traps are not implemented, this routine +should be simply `float_exception_flags |= flags;'. + +ScottB: November 4, 1998 +Moved this function out of softfloat-specialize into fpmodule.c. +This effectively isolates all the changes required for integrating with the +Linux kernel into fpmodule.c. Porting to NetBSD should only require modifying +fpmodule.c to integrate with the NetBSD kernel (I hope!). +------------------------------------------------------------------------------- +void float_raise( int8 flags ) +{ + float_exception_flags |= flags; +} +*/ + +/* +------------------------------------------------------------------------------- +Internal canonical NaN format. +------------------------------------------------------------------------------- +*/ +typedef struct { + flag sign; + bits64 high, low; +} commonNaNT; + +/* +------------------------------------------------------------------------------- +The pattern for a default generated single-precision NaN. +------------------------------------------------------------------------------- +*/ +#define float32_default_nan 0xFFFFFFFF + +/* +------------------------------------------------------------------------------- +Returns 1 if the single-precision floating-point value `a' is a NaN; +otherwise returns 0. +------------------------------------------------------------------------------- +*/ +flag float32_is_nan( float32 a ) +{ + + return ( 0xFF000000 < (bits32) ( a<<1 ) ); + +} + +/* +------------------------------------------------------------------------------- +Returns 1 if the single-precision floating-point value `a' is a signaling +NaN; otherwise returns 0. +------------------------------------------------------------------------------- +*/ +flag float32_is_signaling_nan( float32 a ) +{ + + return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF ); + +} + +/* +------------------------------------------------------------------------------- +Returns the result of converting the single-precision floating-point NaN +`a' to the canonical NaN format. If `a' is a signaling NaN, the invalid +exception is raised. +------------------------------------------------------------------------------- +*/ +static commonNaNT float32ToCommonNaN( float32 a ) +{ + commonNaNT z; + + if ( float32_is_signaling_nan( a ) ) float_raise( float_flag_invalid ); + z.sign = a>>31; + z.low = 0; + z.high = ( (bits64) a )<<41; + return z; + +} + +/* +------------------------------------------------------------------------------- +Returns the result of converting the canonical NaN `a' to the single- +precision floating-point format. +------------------------------------------------------------------------------- +*/ +static float32 commonNaNToFloat32( commonNaNT a ) +{ + + return ( ( (bits32) a.sign )<<31 ) | 0x7FC00000 | ( a.high>>41 ); + +} + +/* +------------------------------------------------------------------------------- +Takes two single-precision floating-point values `a' and `b', one of which +is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a +signaling NaN, the invalid exception is raised. +------------------------------------------------------------------------------- +*/ +static float32 propagateFloat32NaN( float32 a, float32 b ) +{ + flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN; + + aIsNaN = float32_is_nan( a ); + aIsSignalingNaN = float32_is_signaling_nan( a ); + bIsNaN = float32_is_nan( b ); + bIsSignalingNaN = float32_is_signaling_nan( b ); + a |= 0x00400000; + b |= 0x00400000; + if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid ); + if ( aIsNaN ) { + return ( aIsSignalingNaN & bIsNaN ) ? b : a; + } + else { + return b; + } + +} + +/* +------------------------------------------------------------------------------- +The pattern for a default generated double-precision NaN. +------------------------------------------------------------------------------- +*/ +#define float64_default_nan LIT64( 0xFFFFFFFFFFFFFFFF ) + +/* +------------------------------------------------------------------------------- +Returns 1 if the double-precision floating-point value `a' is a NaN; +otherwise returns 0. +------------------------------------------------------------------------------- +*/ +flag float64_is_nan( float64 a ) +{ + + return ( LIT64( 0xFFE0000000000000 ) < (bits64) ( a<<1 ) ); + +} + +/* +------------------------------------------------------------------------------- +Returns 1 if the double-precision floating-point value `a' is a signaling +NaN; otherwise returns 0. +------------------------------------------------------------------------------- +*/ +flag float64_is_signaling_nan( float64 a ) +{ + + return + ( ( ( a>>51 ) & 0xFFF ) == 0xFFE ) + && ( a & LIT64( 0x0007FFFFFFFFFFFF ) ); + +} + +/* +------------------------------------------------------------------------------- +Returns the result of converting the double-precision floating-point NaN +`a' to the canonical NaN format. If `a' is a signaling NaN, the invalid +exception is raised. +------------------------------------------------------------------------------- +*/ +static commonNaNT float64ToCommonNaN( float64 a ) +{ + commonNaNT z; + + if ( float64_is_signaling_nan( a ) ) float_raise( float_flag_invalid ); + z.sign = a>>63; + z.low = 0; + z.high = a<<12; + return z; + +} + +/* +------------------------------------------------------------------------------- +Returns the result of converting the canonical NaN `a' to the double- +precision floating-point format. +------------------------------------------------------------------------------- +*/ +static float64 commonNaNToFloat64( commonNaNT a ) +{ + + return + ( ( (bits64) a.sign )<<63 ) + | LIT64( 0x7FF8000000000000 ) + | ( a.high>>12 ); + +} + +/* +------------------------------------------------------------------------------- +Takes two double-precision floating-point values `a' and `b', one of which +is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a +signaling NaN, the invalid exception is raised. +------------------------------------------------------------------------------- +*/ +static float64 propagateFloat64NaN( float64 a, float64 b ) +{ + flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN; + + aIsNaN = float64_is_nan( a ); + aIsSignalingNaN = float64_is_signaling_nan( a ); + bIsNaN = float64_is_nan( b ); + bIsSignalingNaN = float64_is_signaling_nan( b ); + a |= LIT64( 0x0008000000000000 ); + b |= LIT64( 0x0008000000000000 ); + if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid ); + if ( aIsNaN ) { + return ( aIsSignalingNaN & bIsNaN ) ? b : a; + } + else { + return b; + } + +} + +#ifdef FLOATX80 + +/* +------------------------------------------------------------------------------- +The pattern for a default generated extended double-precision NaN. The +`high' and `low' values hold the most- and least-significant bits, +respectively. +------------------------------------------------------------------------------- +*/ +#define floatx80_default_nan_high 0xFFFF +#define floatx80_default_nan_low LIT64( 0xFFFFFFFFFFFFFFFF ) + +/* +------------------------------------------------------------------------------- +Returns 1 if the extended double-precision floating-point value `a' is a +NaN; otherwise returns 0. +------------------------------------------------------------------------------- +*/ +flag floatx80_is_nan( floatx80 a ) +{ + + return ( ( a.high & 0x7FFF ) == 0x7FFF ) && (bits64) ( a.low<<1 ); + +} + +/* +------------------------------------------------------------------------------- +Returns 1 if the extended double-precision floating-point value `a' is a +signaling NaN; otherwise returns 0. +------------------------------------------------------------------------------- +*/ +flag floatx80_is_signaling_nan( floatx80 a ) +{ + //register int lr; + bits64 aLow; + + //__asm__("mov %0, lr" : : "g" (lr)); + //fp_printk("floatx80_is_signalling_nan() called from 0x%08x\n",lr); + aLow = a.low & ~ LIT64( 0x4000000000000000 ); + return + ( ( a.high & 0x7FFF ) == 0x7FFF ) + && (bits64) ( aLow<<1 ) + && ( a.low == aLow ); + +} + +/* +------------------------------------------------------------------------------- +Returns the result of converting the extended double-precision floating- +point NaN `a' to the canonical NaN format. If `a' is a signaling NaN, the +invalid exception is raised. +------------------------------------------------------------------------------- +*/ +static commonNaNT floatx80ToCommonNaN( floatx80 a ) +{ + commonNaNT z; + + if ( floatx80_is_signaling_nan( a ) ) float_raise( float_flag_invalid ); + z.sign = a.high>>15; + z.low = 0; + z.high = a.low<<1; + return z; + +} + +/* +------------------------------------------------------------------------------- +Returns the result of converting the canonical NaN `a' to the extended +double-precision floating-point format. +------------------------------------------------------------------------------- +*/ +static floatx80 commonNaNToFloatx80( commonNaNT a ) +{ + floatx80 z; + + z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 ); + z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF; + z.__padding = 0; + return z; + +} + +/* +------------------------------------------------------------------------------- +Takes two extended double-precision floating-point values `a' and `b', one +of which is a NaN, and returns the appropriate NaN result. If either `a' or +`b' is a signaling NaN, the invalid exception is raised. +------------------------------------------------------------------------------- +*/ +static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b ) +{ + flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN; + + aIsNaN = floatx80_is_nan( a ); + aIsSignalingNaN = floatx80_is_signaling_nan( a ); + bIsNaN = floatx80_is_nan( b ); + bIsSignalingNaN = floatx80_is_signaling_nan( b ); + a.low |= LIT64( 0xC000000000000000 ); + b.low |= LIT64( 0xC000000000000000 ); + if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid ); + if ( aIsNaN ) { + return ( aIsSignalingNaN & bIsNaN ) ? b : a; + } + else { + return b; + } + +} + +#endif -- cgit v1.2.3