From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../boot/dts/freescale/fsl-lx2160a-bluebox3.dts | 662 +++++++++++++++++++++ 1 file changed, 662 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts (limited to 'arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts') diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts new file mode 100644 index 000000000..042c486bd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts @@ -0,0 +1,662 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A BLUEBOX3 +// +// Copyright 2020-2021 NXP + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "NXP Layerscape LX2160ABLUEBOX3"; + compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + mmc0 = &esdhc0; + mmc1 = &esdhc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "MC34717-3.3VSB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&can0 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&can1 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&crypto { + status = "okay"; +}; + +&dpmac5 { + phy-handle = <&aqr113c_phy1>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac6 { + phy-handle = <&aqr113c_phy2>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac9 { + phy-handle = <&aqr113c_phy3>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac10 { + phy-handle = <&aqr113c_phy4>; + phy-mode = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac17 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&dpmac18 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&emdio1 { + status = "okay"; + + aqr113c_phy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + /* IRQ_10G_PHY2 */ + interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>; + }; + + aqr113c_phy1: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x8>; + /* IRQ_10G_PHY1 */ + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; + }; + + sw1_mii3_phy: ethernet-phy@5 { + /* AR8035 */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x5>; + interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>; + }; + + sw2_mii3_phy: ethernet-phy@6 { + /* AR8035 */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x6>; + interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&emdio2 { + status = "okay"; + + aqr113c_phy4: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + /* IRQ_10G_PHY4 */ + interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; + }; + + aqr113c_phy3: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x8>; + /* IRQ_10G_PHY3 */ + interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; + + mt35xu512aba1: flash@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temp2: temperature-sensor@48 { + compatible = "nxp,sa56004"; + reg = <0x48>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + + temp1: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + i2c-mux@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + spi_bridge: spi@28 { + compatible = "nxp,sc18is602b"; + reg = <0x28>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9846"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + /* The I2C multiplexer and temperature sensors are on + * the T6 riser card. + */ + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + + q12: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + q11: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + + q13: temperature-sensor@48 { + compatible = "nxp,sa56004"; + reg = <0x48>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + + q14: temperature-sensor@4a { + compatible = "nxp,sa56004"; + reg = <0x4a>; + vcc-supply = <&sb_3v3>; + #thermal-sensor-cells = <1>; + }; + }; + }; + }; + }; +}; + +&pcs_mdio5 { + status = "okay"; +}; + +&pcs_mdio6 { + status = "okay"; +}; + +&pcs_mdio9 { + status = "okay"; +}; + +&pcs_mdio10 { + status = "okay"; +}; + +&spi_bridge { + sw1: ethernet-switch@0 { + compatible = "nxp,sja1110a"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-cpol; + dsa,member = <0 0>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Microcontroller port */ + port@0 { + reg = <0>; + status = "disabled"; + }; + + /* SW1_P1 */ + port@1 { + reg = <1>; + label = "con_2x20"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@2 { + reg = <2>; + ethernet = <&dpmac17>; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@3 { + reg = <3>; + label = "1ge_p1"; + phy-mode = "rgmii-id"; + phy-handle = <&sw1_mii3_phy>; + }; + + sw1p4: port@4 { + reg = <4>; + link = <&sw2p1>; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "trx1"; + phy-mode = "internal"; + phy-handle = <&sw1_port5_base_t1_phy>; + }; + + port@6 { + reg = <6>; + label = "trx2"; + phy-mode = "internal"; + phy-handle = <&sw1_port6_base_t1_phy>; + }; + + port@7 { + reg = <7>; + label = "trx3"; + phy-mode = "internal"; + phy-handle = <&sw1_port7_base_t1_phy>; + }; + + port@8 { + reg = <8>; + label = "trx4"; + phy-mode = "internal"; + phy-handle = <&sw1_port8_base_t1_phy>; + }; + + port@9 { + reg = <9>; + label = "trx5"; + phy-mode = "internal"; + phy-handle = <&sw1_port9_base_t1_phy>; + }; + + port@a { + reg = <10>; + label = "trx6"; + phy-mode = "internal"; + phy-handle = <&sw1_port10_base_t1_phy>; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + compatible = "nxp,sja1110-base-t1-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sw1_port5_base_t1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + sw1_port6_base_t1_phy: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + sw1_port7_base_t1_phy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + + sw1_port8_base_t1_phy: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + sw1_port9_base_t1_phy: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x5>; + }; + + sw1_port10_base_t1_phy: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x6>; + }; + }; + }; + }; + + sw2: ethernet-switch@2 { + compatible = "nxp,sja1110a"; + reg = <2>; + spi-max-frequency = <4000000>; + spi-cpol; + dsa,member = <0 1>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* Microcontroller port */ + port@0 { + reg = <0>; + status = "disabled"; + }; + + sw2p1: port@1 { + reg = <1>; + link = <&sw1p4>; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@2 { + reg = <2>; + ethernet = <&dpmac18>; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@3 { + reg = <3>; + label = "1ge_p2"; + phy-mode = "rgmii-id"; + phy-handle = <&sw2_mii3_phy>; + }; + + port@4 { + reg = <4>; + label = "to_sw3"; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "trx7"; + phy-mode = "internal"; + phy-handle = <&sw2_port5_base_t1_phy>; + }; + + port@6 { + reg = <6>; + label = "trx8"; + phy-mode = "internal"; + phy-handle = <&sw2_port6_base_t1_phy>; + }; + + port@7 { + reg = <7>; + label = "trx9"; + phy-mode = "internal"; + phy-handle = <&sw2_port7_base_t1_phy>; + }; + + port@8 { + reg = <8>; + label = "trx10"; + phy-mode = "internal"; + phy-handle = <&sw2_port8_base_t1_phy>; + }; + + port@9 { + reg = <9>; + label = "trx11"; + phy-mode = "internal"; + phy-handle = <&sw2_port9_base_t1_phy>; + }; + + port@a { + reg = <10>; + label = "trx12"; + phy-mode = "internal"; + phy-handle = <&sw2_port10_base_t1_phy>; + }; + }; + + mdios { + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + compatible = "nxp,sja1110-base-t1-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sw2_port5_base_t1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + sw2_port6_base_t1_phy: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + sw2_port7_base_t1_phy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + + sw2_port8_base_t1_phy: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + sw2_port9_base_t1_phy: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x5>; + }; + + sw2_port10_base_t1_phy: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x6>; + }; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; -- cgit v1.2.3