From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 557 ++++++++++++++++++++++++++++++ 1 file changed, 557 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi (limited to 'arch/arm64/boot/dts/mediatek/mt7986a.dtsi') diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi new file mode 100644 index 000000000..51944690e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -0,0 +1,557 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Author: Sam.Shih + */ + +#include +#include +#include +#include +#include + +/ { + compatible = "mediatek,mt7986a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + clk40m: oscillator-40m { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + clock-output-names = "clkxtal"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x0>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x1>; + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x2>; + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + enable-method = "psci"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + #cooling-cells = <2>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@43000000 { + reg = <0 0x43000000 0 0x30000>; + no-map; + }; + + wmcpu_emi: wmcpu-reserved@4fc00000 { + no-map; + reg = <0 0x4fc00000 0 0x00100000>; + }; + + wo_emi0: wo-emi@4fd00000 { + reg = <0 0x4fd00000 0 0x40000>; + no-map; + }; + + wo_emi1: wo-emi@4fd40000 { + reg = <0 0x4fd40000 0 0x40000>; + no-map; + }; + + wo_ilm0: wo-ilm@151e0000 { + reg = <0 0x151e0000 0 0x8000>; + no-map; + }; + + wo_ilm1: wo-ilm@151f0000 { + reg = <0 0x151f0000 0 0x8000>; + no-map; + }; + + wo_data: wo-data@4fd80000 { + reg = <0 0x4fd80000 0 0x240000>; + no-map; + }; + + wo_dlm0: wo-dlm@151e8000 { + reg = <0 0x151e8000 0 0x2000>; + no-map; + }; + + wo_dlm1: wo-dlm@151f8000 { + reg = <0 0x151f8000 0 0x2000>; + no-map; + }; + + wo_boot: wo-boot@15194000 { + reg = <0 0x15194000 0 0x1000>; + no-map; + }; + + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x10000>, /* GICD */ + <0 0x0c080000 0 0x80000>, /* GICR */ + <0 0x0c400000 0 0x2000>, /* GICC */ + <0 0x0c410000 0 0x1000>, /* GICH */ + <0 0x0c420000 0 0x2000>; /* GICV */ + interrupts = ; + }; + + infracfg: infracfg@10001000 { + compatible = "mediatek,mt7986-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + wed_pcie: wed-pcie@10003000 { + compatible = "mediatek,mt7986-wed-pcie", + "syscon"; + reg = <0 0x10003000 0 0x10>; + }; + + topckgen: topckgen@1001b000 { + compatible = "mediatek,mt7986-topckgen", "syscon"; + reg = <0 0x1001B000 0 0x1000>; + #clock-cells = <1>; + }; + + watchdog: watchdog@1001c000 { + compatible = "mediatek,mt7986-wdt"; + reg = <0 0x1001c000 0 0x1000>; + interrupts = ; + #reset-cells = <1>; + status = "disabled"; + }; + + apmixedsys: apmixedsys@1001e000 { + compatible = "mediatek,mt7986-apmixedsys"; + reg = <0 0x1001E000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@1001f000 { + compatible = "mediatek,mt7986a-pinctrl"; + reg = <0 0x1001f000 0 0x1000>, + <0 0x11c30000 0 0x1000>, + <0 0x11c40000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11e30000 0 0x1000>, + <0 0x11f00000 0 0x1000>, + <0 0x11f10000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt", + "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 100>; + interrupt-controller; + interrupts = ; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + }; + + sgmiisys0: syscon@10060000 { + compatible = "mediatek,mt7986-sgmiisys_0", + "syscon"; + reg = <0 0x10060000 0 0x1000>; + #clock-cells = <1>; + }; + + sgmiisys1: syscon@10070000 { + compatible = "mediatek,mt7986-sgmiisys_1", + "syscon"; + reg = <0 0x10070000 0 0x1000>; + #clock-cells = <1>; + }; + + trng: rng@1020f000 { + compatible = "mediatek,mt7986-rng", + "mediatek,mt7623-rng"; + reg = <0 0x1020f000 0 0x100>; + clocks = <&infracfg CLK_INFRA_TRNG_CK>; + clock-names = "rng"; + status = "disabled"; + }; + + crypto: crypto@10320000 { + compatible = "inside-secure,safexcel-eip97"; + reg = <0 0x10320000 0 0x40000>; + interrupts = , + , + , + ; + interrupt-names = "ring0", "ring1", "ring2", "ring3"; + clocks = <&infracfg CLK_INFRA_EIP97_CK>; + clock-names = "infra_eip97_ck"; + assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>; + status = "disabled"; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt7986-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = ; + clocks = <&infracfg CLK_INFRA_UART0_SEL>, + <&infracfg CLK_INFRA_UART0_CK>; + clock-names = "baud", "bus"; + assigned-clocks = <&topckgen CLK_TOP_UART_SEL>, + <&infracfg CLK_INFRA_UART0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_XTAL>, + <&topckgen CLK_TOP_UART_SEL>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt7986-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = ; + clocks = <&infracfg CLK_INFRA_UART1_SEL>, + <&infracfg CLK_INFRA_UART1_CK>; + clock-names = "baud", "bus"; + assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt7986-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = ; + clocks = <&infracfg CLK_INFRA_UART2_SEL>, + <&infracfg CLK_INFRA_UART2_CK>; + clock-names = "baud", "bus"; + assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>; + status = "disabled"; + }; + + i2c0: i2c@11008000 { + compatible = "mediatek,mt7986-i2c"; + reg = <0 0x11008000 0 0x90>, + <0 0x10217080 0 0x80>; + interrupts = ; + clock-div = <5>; + clocks = <&infracfg CLK_INFRA_I2C0_CK>, + <&infracfg CLK_INFRA_AP_DMA_CK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x100>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MPLL_D2>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_SPI0_CK>, + <&infracfg CLK_INFRA_SPI0_HCK_CK>; + clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; + status = "disabled"; + }; + + spi1: spi@1100b000 { + compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100b000 0 0x100>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MPLL_D2>, + <&topckgen CLK_TOP_SPIM_MST_SEL>, + <&infracfg CLK_INFRA_SPI1_CK>, + <&infracfg CLK_INFRA_SPI1_HCK_CK>; + clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; + status = "disabled"; + }; + + ssusb: usb@11200000 { + compatible = "mediatek,mt7986-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x2e00>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>, + <&infracfg CLK_INFRA_IUSB_CK>, + <&infracfg CLK_INFRA_IUSB_133_CK>, + <&infracfg CLK_INFRA_IUSB_66M_CK>, + <&topckgen CLK_TOP_U2U3_XHCI_SEL>; + clock-names = "sys_ck", + "ref_ck", + "mcu_ck", + "dma_ck", + "xhci_ck"; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>, + <&u2port1 PHY_TYPE_USB2>; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt7986-mmc"; + reg = <0 0x11230000 0 0x1000>, + <0 0x11c20000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>, + <&infracfg CLK_INFRA_MSDC_HCK_CK>, + <&infracfg CLK_INFRA_MSDC_CK>, + <&infracfg CLK_INFRA_MSDC_133M_CK>, + <&infracfg CLK_INFRA_MSDC_66M_CK>; + clock-names = "source", "hclk", "source_cg", "bus_clk", + "sys_cg"; + status = "disabled"; + }; + + pcie: pcie@11280000 { + compatible = "mediatek,mt7986-pcie", + "mediatek,mt8192-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0x00 0x11280000 0x00 0x4000>; + reg-names = "pcie-mac"; + interrupts = ; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0x00 0x20000000 0x00 + 0x20000000 0x00 0x10000000>; + clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>, + <&infracfg CLK_INFRA_IPCIE_CK>, + <&infracfg CLK_INFRA_IPCIER_CK>, + <&infracfg CLK_INFRA_IPCIEB_CK>; + clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m"; + status = "disabled"; + + phys = <&pcie_port PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + pcie_phy: t-phy@11c00000 { + compatible = "mediatek,mt7986-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + pcie_port: pcie-phy@11c00000 { + reg = <0 0x11c00000 0 0x20000>; + clocks = <&clk40m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + usb_phy: t-phy@11e10000 { + compatible = "mediatek,mt7986-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11e10000 0x1700>; + status = "disabled"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>, + <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port0: usb-phy@700 { + reg = <0x700 0x900>; + clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + u2port1: usb-phy@1000 { + reg = <0x1000 0x700>; + clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>, + <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + ethsys: syscon@15000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mediatek,mt7986-ethsys", + "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + wed0: wed@15010000 { + compatible = "mediatek,mt7986-wed", + "syscon"; + reg = <0 0x15010000 0 0x1000>; + interrupt-parent = <&gic>; + interrupts = ; + memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>, + <&wo_data>, <&wo_boot>; + memory-region-names = "wo-emi", "wo-ilm", "wo-dlm", + "wo-data", "wo-boot"; + mediatek,wo-ccif = <&wo_ccif0>; + }; + + wed1: wed@15011000 { + compatible = "mediatek,mt7986-wed", + "syscon"; + reg = <0 0x15011000 0 0x1000>; + interrupt-parent = <&gic>; + interrupts = ; + memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>, + <&wo_data>, <&wo_boot>; + memory-region-names = "wo-emi", "wo-ilm", "wo-dlm", + "wo-data", "wo-boot"; + mediatek,wo-ccif = <&wo_ccif1>; + }; + + wo_ccif0: syscon@151a5000 { + compatible = "mediatek,mt7986-wo-ccif", "syscon"; + reg = <0 0x151a5000 0 0x1000>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + wo_ccif1: syscon@151ad000 { + compatible = "mediatek,mt7986-wo-ccif", "syscon"; + reg = <0 0x151ad000 0 0x1000>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + eth: ethernet@15100000 { + compatible = "mediatek,mt7986-eth"; + reg = <0 0x15100000 0 0x80000>; + interrupts = , + , + , + ; + clocks = <ðsys CLK_ETH_FE_EN>, + <ðsys CLK_ETH_GP2_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_WOCPU1_EN>, + <ðsys CLK_ETH_WOCPU0_EN>, + <&sgmiisys0 CLK_SGMII0_TX250M_EN>, + <&sgmiisys0 CLK_SGMII0_RX250M_EN>, + <&sgmiisys0 CLK_SGMII0_CDR_REF>, + <&sgmiisys0 CLK_SGMII0_CDR_FB>, + <&sgmiisys1 CLK_SGMII1_TX250M_EN>, + <&sgmiisys1 CLK_SGMII1_RX250M_EN>, + <&sgmiisys1 CLK_SGMII1_CDR_REF>, + <&sgmiisys1 CLK_SGMII1_CDR_FB>, + <&topckgen CLK_TOP_NETSYS_SEL>, + <&topckgen CLK_TOP_NETSYS_500M_SEL>; + clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", + "sgmii2_tx250m", "sgmii2_rx250m", + "sgmii2_cdr_ref", "sgmii2_cdr_fb", + "netsys0", "netsys1"; + assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>, + <&topckgen CLK_TOP_SGM_325M_SEL>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, + <&apmixedsys CLK_APMIXED_SGMPLL>; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; + mediatek,wed-pcie = <&wed_pcie>; + mediatek,wed = <&wed0>, <&wed1>; + #reset-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wifi: wifi@18000000 { + compatible = "mediatek,mt7986-wmac"; + resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>; + reset-names = "consys"; + clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>, + <&topckgen CLK_TOP_AP2CNN_HOST_SEL>; + clock-names = "mcu", "ap2conn"; + reg = <0 0x18000000 0 0x1000000>, + <0 0x10003000 0 0x1000>, + <0 0x11d10000 0 0x1000>; + interrupts = , + , + , + ; + memory-region = <&wmcpu_emi>; + }; + }; + +}; -- cgit v1.2.3