From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm64/boot/dts/mediatek/mt8516.dtsi | 527 +++++++++++++++++++++++++++++++ 1 file changed, 527 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8516.dtsi (limited to 'arch/arm64/boot/dts/mediatek/mt8516.dtsi') diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi new file mode 100644 index 000000000..9cbd6dd8f --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 MediaTek Inc. + * Copyright (c) 2019 BayLibre, SAS. + * Author: Fabien Parent + */ + +#include +#include +#include +#include + +#include "mt8516-pinfunc.h" + +/ { + compatible = "mediatek,mt8516"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + opp-598000000 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <1150000>; + }; + opp-747500000 { + opp-hz = /bits/ 64 <747500000>; + opp-microvolt = <1150000>; + }; + opp-1040000000 { + opp-hz = /bits/ 64 <1040000000>; + opp-microvolt = <1200000>; + }; + opp-1196000000 { + opp-hz = /bits/ 64 <1196000000>; + opp-microvolt = <1250000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1300000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0>; + enable-method = "psci"; + cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>, + <&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>; + clocks = <&infracfg CLK_IFR_MUX1_SEL>, + <&topckgen CLK_TOP_MAINPLL_D2>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x1>; + enable-method = "psci"; + cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>, + <&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>; + clocks = <&infracfg CLK_IFR_MUX1_SEL>, + <&topckgen CLK_TOP_MAINPLL_D2>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x2>; + enable-method = "psci"; + cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>, + <&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>; + clocks = <&infracfg CLK_IFR_MUX1_SEL>, + <&topckgen CLK_TOP_MAINPLL_D2>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x3>; + enable-method = "psci"; + cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>, + <&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>; + clocks = <&infracfg CLK_IFR_MUX1_SEL>, + <&topckgen CLK_TOP_MAINPLL_D2>; + clock-names = "cpu", "intermediate", "armpll"; + operating-points-v2 = <&cluster0_opp>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + entry-latency-us = <600>; + exit-latency-us = <600>; + min-residency-us = <1200>; + arm,psci-suspend-param = <0x0010000>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + entry-latency-us = <800>; + exit-latency-us = <1000>; + min-residency-us = <2000>; + arm,psci-suspend-param = <0x2010000>; + }; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + clk26m: clk26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: clk32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "clk32k"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 128 KiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: secmon@43000000 { + no-map; + reg = <0 0x43000000 0 0x20000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + topckgen: topckgen@10000000 { + compatible = "mediatek,mt8516-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: infracfg@10001000 { + compatible = "mediatek,mt8516-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pericfg: pericfg@10003050 { + compatible = "mediatek,mt8516-pericfg", "syscon"; + reg = <0 0x10003050 0 0x1000>; + }; + + apmixedsys: apmixedsys@10018000 { + compatible = "mediatek,mt8516-apmixedsys", "syscon"; + reg = <0 0x10018000 0 0x710>; + #clock-cells = <1>; + }; + + watchdog@10007000 { + compatible = "mediatek,mt8516-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x1000>; + interrupts = ; + #reset-cells = <1>; + }; + + timer: timer@10008000 { + compatible = "mediatek,mt8516-timer", + "mediatek,mt6577-timer"; + reg = <0 0x10008000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_CLK26M_D2>, + <&topckgen CLK_TOP_APXGPT>; + clock-names = "clk13m", "bus"; + }; + + syscfg_pctl: syscfg-pctl@10005000 { + compatible = "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + pio: pinctrl@1000b000 { + compatible = "mediatek,mt8516-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = ; + }; + + efuse: efuse@10009000 { + compatible = "mediatek,mt8516-efuse", "mediatek,efuse"; + reg = <0 0x10009000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + pwrap: pwrap@1000f000 { + compatible = "mediatek,mt8516-pwrap"; + reg = <0 0x1000f000 0 0x1000>; + reg-names = "pwrap"; + interrupts = ; + clocks = <&topckgen CLK_TOP_PMICWRAP_26M>, + <&topckgen CLK_TOP_PMICWRAP_AP>; + clock-names = "spi", "wrap"; + }; + + sysirq: interrupt-controller@10200620 { + compatible = "mediatek,mt8516-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200620 0 0x20>; + }; + + gic: interrupt-controller@10310000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x10310000 0 0x1000>, + <0 0x10320000 0 0x1000>, + <0 0x10340000 0 0x2000>, + <0 0x10360000 0 0x2000>; + interrupts = ; + }; + + apdma: dma-controller@11000480 { + compatible = "mediatek,mt8516-uart-dma", + "mediatek,mt6577-uart-dma"; + reg = <0 0x11000480 0 0x80>, + <0 0x11000500 0 0x80>, + <0 0x11000580 0 0x80>, + <0 0x11000600 0 0x80>, + <0 0x11000980 0 0x80>, + <0 0x11000a00 0 0x80>; + interrupts = , + , + , + , + , + ; + dma-requests = <6>; + clocks = <&topckgen CLK_TOP_APDMA>; + clock-names = "apdma"; + #dma-cells = <1>; + }; + + uart0: serial@11005000 { + compatible = "mediatek,mt8516-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UART0_SEL>, + <&topckgen CLK_TOP_UART0>; + clock-names = "baud", "bus"; + dmas = <&apdma 0 + &apdma 1>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart1: serial@11006000 { + compatible = "mediatek,mt8516-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11006000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UART1_SEL>, + <&topckgen CLK_TOP_UART1>; + clock-names = "baud", "bus"; + dmas = <&apdma 2 + &apdma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart2: serial@11007000 { + compatible = "mediatek,mt8516-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11007000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UART2_SEL>, + <&topckgen CLK_TOP_UART2>; + clock-names = "baud", "bus"; + dmas = <&apdma 4 + &apdma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c0: i2c@11009000 { + compatible = "mediatek,mt8516-i2c", + "mediatek,mt2712-i2c"; + reg = <0 0x11009000 0 0x90>, + <0 0x11000180 0 0x80>; + interrupts = ; + clocks = <&topckgen CLK_TOP_I2C0>, + <&topckgen CLK_TOP_APDMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@1100a000 { + compatible = "mediatek,mt8516-i2c", + "mediatek,mt2712-i2c"; + reg = <0 0x1100a000 0 0x90>, + <0 0x11000200 0 0x80>; + interrupts = ; + clocks = <&topckgen CLK_TOP_I2C1>, + <&topckgen CLK_TOP_APDMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@1100b000 { + compatible = "mediatek,mt8516-i2c", + "mediatek,mt2712-i2c"; + reg = <0 0x1100b000 0 0x90>, + <0 0x11000280 0 0x80>; + interrupts = ; + clocks = <&topckgen CLK_TOP_I2C2>, + <&topckgen CLK_TOP_APDMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi: spi@1100c000 { + compatible = "mediatek,mt8516-spi", + "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100c000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL_D12>, + <&topckgen CLK_TOP_SPI_SEL>, + <&topckgen CLK_TOP_SPI>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + mmc0: mmc@11120000 { + compatible = "mediatek,mt8516-mmc"; + reg = <0 0x11120000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MSDC0>, + <&topckgen CLK_TOP_AHB_INFRA_SEL>, + <&topckgen CLK_TOP_MSDC0_INFRA>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc1: mmc@11130000 { + compatible = "mediatek,mt8516-mmc"; + reg = <0 0x11130000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MSDC1>, + <&topckgen CLK_TOP_AHB_INFRA_SEL>, + <&topckgen CLK_TOP_MSDC1_INFRA>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc2: mmc@11170000 { + compatible = "mediatek,mt8516-mmc"; + reg = <0 0x11170000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_MSDC2>, + <&topckgen CLK_TOP_RG_MSDC2>, + <&topckgen CLK_TOP_MSDC2_INFRA>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + ethernet: ethernet@11180000 { + compatible = "mediatek,mt8516-eth"; + reg = <0 0x11180000 0 0x1000>; + mediatek,pericfg = <&pericfg>; + interrupts = ; + clocks = <&topckgen CLK_TOP_RG_ETH>, + <&topckgen CLK_TOP_66M_ETH>, + <&topckgen CLK_TOP_133M_ETH>; + clock-names = "core", "reg", "trans"; + status = "disabled"; + }; + + rng: rng@1020c000 { + compatible = "mediatek,mt8516-rng", + "mediatek,mt7623-rng"; + reg = <0 0x1020c000 0 0x100>; + clocks = <&topckgen CLK_TOP_TRNG>; + clock-names = "rng"; + }; + + pwm: pwm@11008000 { + compatible = "mediatek,mt8516-pwm"; + reg = <0 0x11008000 0 0x1000>; + #pwm-cells = <2>; + interrupts = ; + clocks = <&topckgen CLK_TOP_PWM>, + <&topckgen CLK_TOP_PWM_B>, + <&topckgen CLK_TOP_PWM1_FB>, + <&topckgen CLK_TOP_PWM2_FB>, + <&topckgen CLK_TOP_PWM3_FB>, + <&topckgen CLK_TOP_PWM4_FB>, + <&topckgen CLK_TOP_PWM5_FB>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3", + "pwm4", "pwm5"; + }; + + usb0: usb@11100000 { + compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb"; + reg = <0 0x11100000 0 0x1000>; + interrupts = ; + interrupt-names = "mc"; + phys = <&usb0_port PHY_TYPE_USB2>; + clocks = <&topckgen CLK_TOP_USB>, + <&topckgen CLK_TOP_USBIF>, + <&topckgen CLK_TOP_USB_1P>; + clock-names = "main","mcu","univpll"; + status = "disabled"; + }; + + usb1: usb@11190000 { + compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb"; + reg = <0 0x11190000 0 0x1000>; + interrupts = ; + interrupt-names = "mc"; + phys = <&usb1_port PHY_TYPE_USB2>; + clocks = <&topckgen CLK_TOP_USB>, + <&topckgen CLK_TOP_USBIF>, + <&topckgen CLK_TOP_USB_1P>; + clock-names = "main","mcu","univpll"; + dr_mode = "host"; + status = "disabled"; + }; + + usb_phy: t-phy@11110000 { + compatible = "mediatek,mt8516-tphy", + "mediatek,generic-tphy-v1"; + reg = <0 0x11110000 0 0x800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb0_port: usb-phy@11110800 { + reg = <0 0x11110800 0 0x100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + usb1_port: usb-phy@11110900 { + reg = <0 0x11110900 0 0x100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + auxadc: adc@11003000 { + compatible = "mediatek,mt8516-auxadc", + "mediatek,mt8173-auxadc"; + reg = <0 0x11003000 0 0x1000>; + clocks = <&topckgen CLK_TOP_AUX_ADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + }; +}; -- cgit v1.2.3