From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../boot/dts/microchip/sparx5_pcb134_board.dtsi | 907 +++++++++++++++++++++ 1 file changed, 907 insertions(+) create mode 100644 arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi (limited to 'arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi') diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi new file mode 100644 index 000000000..ed94a80bf --- /dev/null +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -0,0 +1,907 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +/dts-v1/; +#include "sparx5_pcb_common.dtsi" + +/{ + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + priority = <200>; + }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "twr0:green"; + gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>; + }; + led@1 { + label = "twr0:yellow"; + gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>; + }; + led@2 { + label = "twr1:green"; + gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>; + }; + led@3 { + label = "twr1:yellow"; + gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>; + }; + led@4 { + label = "twr2:green"; + gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>; + }; + led@5 { + label = "twr2:yellow"; + gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>; + }; + led@6 { + label = "twr3:green"; + gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>; + }; + led@7 { + label = "twr3:yellow"; + gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>; + }; + led@8 { + label = "eth12:green"; + gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@9 { + label = "eth12:yellow"; + gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@10 { + label = "eth13:green"; + gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@11 { + label = "eth13:yellow"; + gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@12 { + label = "eth14:green"; + gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@13 { + label = "eth14:yellow"; + gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@14 { + label = "eth15:green"; + gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@15 { + label = "eth15:yellow"; + gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@16 { + label = "eth48:green"; + gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@17 { + label = "eth48:yellow"; + gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@18 { + label = "eth49:green"; + gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@19 { + label = "eth49:yellow"; + gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@20 { + label = "eth50:green"; + gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@21 { + label = "eth50:yellow"; + gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@22 { + label = "eth51:green"; + gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@23 { + label = "eth51:yellow"; + gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@24 { + label = "eth52:green"; + gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@25 { + label = "eth52:yellow"; + gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@26 { + label = "eth53:green"; + gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@27 { + label = "eth53:yellow"; + gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@28 { + label = "eth54:green"; + gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@29 { + label = "eth54:yellow"; + gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@30 { + label = "eth55:green"; + gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@31 { + label = "eth55:yellow"; + gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@32 { + label = "eth56:green"; + gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@33 { + label = "eth56:yellow"; + gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@34 { + label = "eth57:green"; + gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@35 { + label = "eth57:yellow"; + gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@36 { + label = "eth58:green"; + gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@37 { + label = "eth58:yellow"; + gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@38 { + label = "eth59:green"; + gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@39 { + label = "eth59:yellow"; + gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@40 { + label = "eth60:green"; + gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@41 { + label = "eth60:yellow"; + gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@42 { + label = "eth61:green"; + gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@43 { + label = "eth61:yellow"; + gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@44 { + label = "eth62:green"; + gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@45 { + label = "eth62:yellow"; + gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@46 { + label = "eth63:green"; + gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led@47 { + label = "eth63:yellow"; + gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <8 15>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <8000000>; + reg = <0>; + }; +}; + +&spi0 { + status = "okay"; + spi@0 { + compatible = "spi-mux"; + mux-controls = <&mux>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; /* CS0 */ + flash@9 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <8000000>; + reg = <0x9>; /* SPI */ + }; + }; +}; + +&sgpio0 { + status = "okay"; + microchip,sgpio-port-ranges = <8 15>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&sgpio1 { + status = "okay"; + microchip,sgpio-port-ranges = <24 31>; + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + +&sgpio2 { + status = "okay"; + microchip,sgpio-port-ranges = <0 0>, <11 31>; +}; + +&gpio { + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", + "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35", + "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0 { + pins = "GPIO_16"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1 { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2 { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3 { + pins = "GPIO_19"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_4: i2cmux-4 { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_5: i2cmux-5 { + pins = "GPIO_22"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_6: i2cmux-6 { + pins = "GPIO_36"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_7: i2cmux-7 { + pins = "GPIO_35"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_8: i2cmux-8 { + pins = "GPIO_50"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_9: i2cmux-9 { + pins = "GPIO_51"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_10: i2cmux-10 { + pins = "GPIO_56"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_11: i2cmux-11 { + pins = "GPIO_57"; + function = "twi_scl_m"; + output-high; + }; +}; + +&axi { + i2c0_imux: i2c0-imux@0 { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + }; + i2c0_emux: i2c0-emux@0 { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + }; +}; + +&i2c0_imux { + pinctrl-names = + "i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4", + "i2c_sfp5", "i2c_sfp6", "i2c_sfp7", "i2c_sfp8", + "i2c_sfp9", "i2c_sfp10", "i2c_sfp11", "i2c_sfp12", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_4>; + pinctrl-5 = <&i2cmux_5>; + pinctrl-6 = <&i2cmux_6>; + pinctrl-7 = <&i2cmux_7>; + pinctrl-8 = <&i2cmux_8>; + pinctrl-9 = <&i2cmux_9>; + pinctrl-10 = <&i2cmux_10>; + pinctrl-11 = <&i2cmux_11>; + pinctrl-12 = <&i2cmux_pins_i>; + i2c_sfp1: i2c_sfp1 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp2: i2c_sfp2 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp3: i2c_sfp3 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp4: i2c_sfp4 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp5: i2c_sfp5 { + reg = <0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp6: i2c_sfp6 { + reg = <0x5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp7: i2c_sfp7 { + reg = <0x6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp8: i2c_sfp8 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp9: i2c_sfp9 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp10: i2c_sfp10 { + reg = <0x9>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp11: i2c_sfp11 { + reg = <0xa>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp12: i2c_sfp12 { + reg = <0xb>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&i2c0_emux { + mux-gpios = <&gpio 55 GPIO_ACTIVE_HIGH + &gpio 60 GPIO_ACTIVE_HIGH + &gpio 61 GPIO_ACTIVE_HIGH + &gpio 54 GPIO_ACTIVE_HIGH>; + idle-state = <0x8>; + i2c_sfp13: i2c_sfp13 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp14: i2c_sfp14 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp15: i2c_sfp15 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp16: i2c_sfp16 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp17: i2c_sfp17 { + reg = <0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp18: i2c_sfp18 { + reg = <0x5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp19: i2c_sfp19 { + reg = <0x6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c_sfp20: i2c_sfp20 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio3 { + status = "okay"; + phy64: ethernet-phy@64 { + reg = <28>; + }; +}; + +&axi { + sfp_eth12: sfp-eth12 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp1>; + tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth13: sfp-eth13 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp2>; + tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth14: sfp-eth14 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp3>; + tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth15: sfp-eth15 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp4>; + tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth48: sfp-eth48 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp5>; + tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth49: sfp-eth49 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp6>; + tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth50: sfp-eth50 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp7>; + tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth51: sfp-eth51 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp8>; + tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth52: sfp-eth52 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp9>; + tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth53: sfp-eth53 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp10>; + tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth54: sfp-eth54 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp11>; + tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth55: sfp-eth55 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp12>; + tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth56: sfp-eth56 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp13>; + tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth57: sfp-eth57 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp14>; + tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth58: sfp-eth58 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp15>; + tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth59: sfp-eth59 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp16>; + tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth60: sfp-eth60 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp17>; + tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth61: sfp-eth61 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp18>; + tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth62: sfp-eth62 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp19>; + tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; + }; + sfp_eth63: sfp-eth63 { + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp20>; + tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>; + los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; + }; +}; + +&switch { + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* 10G SFPs */ + port12: port@12 { + reg = <12>; + microchip,bandwidth = <10000>; + phys = <&serdes 13>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth12>; + microchip,sd-sgpio = <301>; + managed = "in-band-status"; + }; + port13: port@13 { + reg = <13>; + /* Example: CU SFP, 1G speed */ + microchip,bandwidth = <10000>; + phys = <&serdes 14>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth13>; + microchip,sd-sgpio = <305>; + managed = "in-band-status"; + }; + port14: port@14 { + reg = <14>; + microchip,bandwidth = <10000>; + phys = <&serdes 15>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth14>; + microchip,sd-sgpio = <309>; + managed = "in-band-status"; + }; + port15: port@15 { + reg = <15>; + microchip,bandwidth = <10000>; + phys = <&serdes 16>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth15>; + microchip,sd-sgpio = <313>; + managed = "in-band-status"; + }; + port48: port@48 { + reg = <48>; + microchip,bandwidth = <10000>; + phys = <&serdes 17>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth48>; + microchip,sd-sgpio = <317>; + managed = "in-band-status"; + }; + port49: port@49 { + reg = <49>; + microchip,bandwidth = <10000>; + phys = <&serdes 18>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth49>; + microchip,sd-sgpio = <321>; + managed = "in-band-status"; + }; + port50: port@50 { + reg = <50>; + microchip,bandwidth = <10000>; + phys = <&serdes 19>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth50>; + microchip,sd-sgpio = <325>; + managed = "in-band-status"; + }; + port51: port@51 { + reg = <51>; + microchip,bandwidth = <10000>; + phys = <&serdes 20>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth51>; + microchip,sd-sgpio = <329>; + managed = "in-band-status"; + }; + port52: port@52 { + reg = <52>; + microchip,bandwidth = <10000>; + phys = <&serdes 21>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth52>; + microchip,sd-sgpio = <333>; + managed = "in-band-status"; + }; + port53: port@53 { + reg = <53>; + microchip,bandwidth = <10000>; + phys = <&serdes 22>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth53>; + microchip,sd-sgpio = <337>; + managed = "in-band-status"; + }; + port54: port@54 { + reg = <54>; + microchip,bandwidth = <10000>; + phys = <&serdes 23>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth54>; + microchip,sd-sgpio = <341>; + managed = "in-band-status"; + }; + port55: port@55 { + reg = <55>; + microchip,bandwidth = <10000>; + phys = <&serdes 24>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth55>; + microchip,sd-sgpio = <345>; + managed = "in-band-status"; + }; + /* 25G SFPs */ + port56: port@56 { + reg = <56>; + microchip,bandwidth = <10000>; + phys = <&serdes 25>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth56>; + microchip,sd-sgpio = <349>; + managed = "in-band-status"; + }; + port57: port@57 { + reg = <57>; + microchip,bandwidth = <10000>; + phys = <&serdes 26>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth57>; + microchip,sd-sgpio = <353>; + managed = "in-band-status"; + }; + port58: port@58 { + reg = <58>; + microchip,bandwidth = <10000>; + phys = <&serdes 27>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth58>; + microchip,sd-sgpio = <357>; + managed = "in-band-status"; + }; + port59: port@59 { + reg = <59>; + microchip,bandwidth = <10000>; + phys = <&serdes 28>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth59>; + microchip,sd-sgpio = <361>; + managed = "in-band-status"; + }; + port60: port@60 { + reg = <60>; + microchip,bandwidth = <10000>; + phys = <&serdes 29>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth60>; + microchip,sd-sgpio = <365>; + managed = "in-band-status"; + }; + port61: port@61 { + reg = <61>; + microchip,bandwidth = <10000>; + phys = <&serdes 30>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth61>; + microchip,sd-sgpio = <369>; + managed = "in-band-status"; + }; + port62: port@62 { + reg = <62>; + microchip,bandwidth = <10000>; + phys = <&serdes 31>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth62>; + microchip,sd-sgpio = <373>; + managed = "in-band-status"; + }; + port63: port@63 { + reg = <63>; + microchip,bandwidth = <10000>; + phys = <&serdes 32>; + phy-mode = "10gbase-r"; + sfp = <&sfp_eth63>; + microchip,sd-sgpio = <377>; + managed = "in-band-status"; + }; + /* Finally the Management interface */ + port64: port@64 { + reg = <64>; + microchip,bandwidth = <1000>; + phys = <&serdes 0>; + phy-handle = <&phy64>; + phy-mode = "sgmii"; + }; + }; +}; -- cgit v1.2.3