From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 1386 ++++++++++++++++++++ 1 file changed, 1386 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts (limited to 'arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts new file mode 100644 index 000000000..38f4ff229 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -0,0 +1,1386 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra210-p2180.dtsi" +#include "tegra210-p2597.dtsi" + +/ { + model = "NVIDIA Jetson TX1 Developer Kit"; + compatible = "nvidia,p2371-2180", "nvidia,tegra210"; + + pcie@1003000 { + status = "okay"; + + hvddio-pex-supply = <&vdd_1v8>; + dvddio-pex-supply = <&vdd_pex_1v05>; + vddio-pex-ctl-supply = <&vdd_1v8>; + + pci@1,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>; + phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3"; + status = "okay"; + }; + + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; + phy-names = "pcie-0"; + status = "okay"; + }; + }; + + host1x@50000000 { + dsi@54300000 { + status = "okay"; + + avdd-dsi-csi-supply = <&vdd_dsi_csi>; + + panel@0 { + compatible = "auo,b080uan01"; + reg = <0>; + + enable-gpios = <&gpio TEGRA_GPIO(V, 2) + GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_5v0_io>; + backlight = <&backlight>; + }; + }; + }; + + i2c@7000c400 { + backlight: backlight@2c { + compatible = "ti,lp8557"; + reg = <0x2c>; + power-supply = <&vdd_3v3_sys>; + + dev-ctrl = /bits/ 8 <0x80>; + init-brt = /bits/ 8 <0xff>; + + pwm-period = <29334>; + + pwms = <&pwm 0 29334>; + pwm-names = "lp8557"; + + /* boost frequency 1 MHz */ + rom_13h { + rom-addr = /bits/ 8 <0x13>; + rom-val = /bits/ 8 <0x01>; + }; + + /* 3 LED string */ + rom_14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0x87>; + }; + }; + }; + + i2c@7000c500 { + /* carrier board ID EEPROM */ + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + label = "system"; + vcc-supply = <&vdd_1v8>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + clock@70110000 { + status = "okay"; + + nvidia,cf = <6>; + nvidia,ci = <0>; + nvidia,cg = <2>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,sample-rate = <25000>; + + nvidia,pwm-min-microvolts = <708000>; + nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */ + nvidia,pwm-to-pmic; + nvidia,pwm-tristate-microvolts = <1000000>; + nvidia,pwm-voltage-step-microvolts = <19200>; + + pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable"; + pinctrl-0 = <&dvfs_pwm_active_state>; + pinctrl-1 = <&dvfs_pwm_inactive_state>; + }; + + aconnect@702c0000 { + status = "okay"; + + ahub@702d0800 { + status = "okay"; + + admaif@702d0000 { + status = "okay"; + }; + + i2s@702d1000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s1_ep>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s2_ep>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s3_ep>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1300 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s4_ep>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + i2s@702d1400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif_ep: endpoint { + remote-endpoint = <&xbar_i2s5_ep>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap_ep: endpoint { + dai-format = "i2s"; + /* Placeholder for external Codec */ + }; + }; + }; + }; + + sfc@702d2000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc1_in_ep>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc1_out_ep>; + }; + }; + }; + }; + + sfc@702d2200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc2_in_ep>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc2_out_ep>; + }; + }; + }; + }; + + sfc@702d2400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc3_in_ep>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc3_out_ep>; + }; + }; + }; + }; + + sfc@702d2600 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in_ep: endpoint { + remote-endpoint = <&xbar_sfc4_in_ep>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out_ep: endpoint { + remote-endpoint = <&xbar_sfc4_out_ep>; + }; + }; + }; + }; + + amx@702d3000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1_ep: endpoint { + remote-endpoint = <&xbar_amx1_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2_ep: endpoint { + remote-endpoint = <&xbar_amx1_in2_ep>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3_ep: endpoint { + remote-endpoint = <&xbar_amx1_in3_ep>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4_ep: endpoint { + remote-endpoint = <&xbar_amx1_in4_ep>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out_ep: endpoint { + remote-endpoint = <&xbar_amx1_out_ep>; + }; + }; + }; + }; + + amx@702d3100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1_ep: endpoint { + remote-endpoint = <&xbar_amx2_in1_ep>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2_ep: endpoint { + remote-endpoint = <&xbar_amx2_in2_ep>; + }; + }; + + amx2_in3_port: port@2 { + reg = <2>; + + amx2_in3_ep: endpoint { + remote-endpoint = <&xbar_amx2_in3_ep>; + }; + }; + + amx2_in4_port: port@3 { + reg = <3>; + + amx2_in4_ep: endpoint { + remote-endpoint = <&xbar_amx2_in4_ep>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out_ep: endpoint { + remote-endpoint = <&xbar_amx2_out_ep>; + }; + }; + }; + }; + + adx@702d3800 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in_ep: endpoint { + remote-endpoint = <&xbar_adx1_in_ep>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1_ep: endpoint { + remote-endpoint = <&xbar_adx1_out1_ep>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2_ep: endpoint { + remote-endpoint = <&xbar_adx1_out2_ep>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3_ep: endpoint { + remote-endpoint = <&xbar_adx1_out3_ep>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4_ep: endpoint { + remote-endpoint = <&xbar_adx1_out4_ep>; + }; + }; + }; + }; + + adx@702d3900 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in_ep: endpoint { + remote-endpoint = <&xbar_adx2_in_ep>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1_ep: endpoint { + remote-endpoint = <&xbar_adx2_out1_ep>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2_ep: endpoint { + remote-endpoint = <&xbar_adx2_out2_ep>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3_ep: endpoint { + remote-endpoint = <&xbar_adx2_out3_ep>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4_ep: endpoint { + remote-endpoint = <&xbar_adx2_out4_ep>; + }; + }; + }; + }; + + dmic@702d4000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic1_ep>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4100 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic2_ep>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + dmic@702d4200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic3_cif_ep: endpoint { + remote-endpoint = <&xbar_dmic3_ep>; + }; + }; + + dmic3_port: port@1 { + reg = <1>; + + dmic3_dap_ep: endpoint { + /* Placeholder for external Codec */ + }; + }; + }; + }; + + processing-engine@702d8000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope1_out_ep>; + }; + }; + }; + }; + + processing-engine@702d8400 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_ope2_in_ep>; + }; + }; + + ope2_out_port: port@1 { + reg = <0x1>; + + ope2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_ope2_out_ep>; + }; + }; + }; + }; + + mvc@702da000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc1_in_ep>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc1_out_ep>; + }; + }; + }; + }; + + mvc@702da200 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in_ep: endpoint { + remote-endpoint = <&xbar_mvc2_in_ep>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out_ep: endpoint { + remote-endpoint = <&xbar_mvc2_out_ep>; + }; + }; + }; + }; + + amixer@702dbb00 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mixer_in1_ep: endpoint { + remote-endpoint = <&xbar_mixer_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + mixer_in2_ep: endpoint { + remote-endpoint = <&xbar_mixer_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + mixer_in3_ep: endpoint { + remote-endpoint = <&xbar_mixer_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + mixer_in4_ep: endpoint { + remote-endpoint = <&xbar_mixer_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + mixer_in5_ep: endpoint { + remote-endpoint = <&xbar_mixer_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + mixer_in6_ep: endpoint { + remote-endpoint = <&xbar_mixer_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + mixer_in7_ep: endpoint { + remote-endpoint = <&xbar_mixer_in7_ep>; + }; + }; + + port@7 { + reg = <0x7>; + + mixer_in8_ep: endpoint { + remote-endpoint = <&xbar_mixer_in8_ep>; + }; + }; + + port@8 { + reg = <0x8>; + + mixer_in9_ep: endpoint { + remote-endpoint = <&xbar_mixer_in9_ep>; + }; + }; + + port@9 { + reg = <0x9>; + + mixer_in10_ep: endpoint { + remote-endpoint = <&xbar_mixer_in10_ep>; + }; + }; + + mixer_out1_port: port@a { + reg = <0xa>; + + mixer_out1_ep: endpoint { + remote-endpoint = <&xbar_mixer_out1_ep>; + }; + }; + + mixer_out2_port: port@b { + reg = <0xb>; + + mixer_out2_ep: endpoint { + remote-endpoint = <&xbar_mixer_out2_ep>; + }; + }; + + mixer_out3_port: port@c { + reg = <0xc>; + + mixer_out3_ep: endpoint { + remote-endpoint = <&xbar_mixer_out3_ep>; + }; + }; + + mixer_out4_port: port@d { + reg = <0xd>; + + mixer_out4_ep: endpoint { + remote-endpoint = <&xbar_mixer_out4_ep>; + }; + }; + + mixer_out5_port: port@e { + reg = <0xe>; + + mixer_out5_ep: endpoint { + remote-endpoint = <&xbar_mixer_out5_ep>; + }; + }; + }; + }; + + ports { + xbar_i2s1_port: port@a { + reg = <0xa>; + + xbar_i2s1_ep: endpoint { + remote-endpoint = <&i2s1_cif_ep>; + }; + }; + + xbar_i2s2_port: port@b { + reg = <0xb>; + + xbar_i2s2_ep: endpoint { + remote-endpoint = <&i2s2_cif_ep>; + }; + }; + + xbar_i2s3_port: port@c { + reg = <0xc>; + + xbar_i2s3_ep: endpoint { + remote-endpoint = <&i2s3_cif_ep>; + }; + }; + + xbar_i2s4_port: port@d { + reg = <0xd>; + + xbar_i2s4_ep: endpoint { + remote-endpoint = <&i2s4_cif_ep>; + }; + }; + + xbar_i2s5_port: port@e { + reg = <0xe>; + + xbar_i2s5_ep: endpoint { + remote-endpoint = <&i2s5_cif_ep>; + }; + }; + + xbar_dmic1_port: port@f { + reg = <0xf>; + + xbar_dmic1_ep: endpoint { + remote-endpoint = <&dmic1_cif_ep>; + }; + }; + + xbar_dmic2_port: port@10 { + reg = <0x10>; + + xbar_dmic2_ep: endpoint { + remote-endpoint = <&dmic2_cif_ep>; + }; + }; + + xbar_dmic3_port: port@11 { + reg = <0x11>; + + xbar_dmic3_ep: endpoint { + remote-endpoint = <&dmic3_cif_ep>; + }; + }; + + xbar_sfc1_in_port: port@12 { + reg = <0x12>; + + xbar_sfc1_in_ep: endpoint { + remote-endpoint = <&sfc1_cif_in_ep>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_sfc1_out_ep: endpoint { + remote-endpoint = <&sfc1_cif_out_ep>; + }; + }; + + xbar_sfc2_in_port: port@14 { + reg = <0x14>; + + xbar_sfc2_in_ep: endpoint { + remote-endpoint = <&sfc2_cif_in_ep>; + }; + }; + + port@15 { + reg = <0x15>; + + xbar_sfc2_out_ep: endpoint { + remote-endpoint = <&sfc2_cif_out_ep>; + }; + }; + + xbar_sfc3_in_port: port@16 { + reg = <0x16>; + + xbar_sfc3_in_ep: endpoint { + remote-endpoint = <&sfc3_cif_in_ep>; + }; + }; + + port@17 { + reg = <0x17>; + + xbar_sfc3_out_ep: endpoint { + remote-endpoint = <&sfc3_cif_out_ep>; + }; + }; + + xbar_sfc4_in_port: port@18 { + reg = <0x18>; + + xbar_sfc4_in_ep: endpoint { + remote-endpoint = <&sfc4_cif_in_ep>; + }; + }; + + port@19 { + reg = <0x19>; + + xbar_sfc4_out_ep: endpoint { + remote-endpoint = <&sfc4_cif_out_ep>; + }; + }; + + xbar_mvc1_in_port: port@1a { + reg = <0x1a>; + + xbar_mvc1_in_ep: endpoint { + remote-endpoint = <&mvc1_cif_in_ep>; + }; + }; + + port@1b { + reg = <0x1b>; + + xbar_mvc1_out_ep: endpoint { + remote-endpoint = <&mvc1_cif_out_ep>; + }; + }; + + xbar_mvc2_in_port: port@1c { + reg = <0x1c>; + + xbar_mvc2_in_ep: endpoint { + remote-endpoint = <&mvc2_cif_in_ep>; + }; + }; + + port@1d { + reg = <0x1d>; + + xbar_mvc2_out_ep: endpoint { + remote-endpoint = <&mvc2_cif_out_ep>; + }; + }; + + xbar_amx1_in1_port: port@1e { + reg = <0x1e>; + + xbar_amx1_in1_ep: endpoint { + remote-endpoint = <&amx1_in1_ep>; + }; + }; + + xbar_amx1_in2_port: port@1f { + reg = <0x1f>; + + xbar_amx1_in2_ep: endpoint { + remote-endpoint = <&amx1_in2_ep>; + }; + }; + + xbar_amx1_in3_port: port@20 { + reg = <0x20>; + + xbar_amx1_in3_ep: endpoint { + remote-endpoint = <&amx1_in3_ep>; + }; + }; + + xbar_amx1_in4_port: port@21 { + reg = <0x21>; + + xbar_amx1_in4_ep: endpoint { + remote-endpoint = <&amx1_in4_ep>; + }; + }; + + port@22 { + reg = <0x22>; + + xbar_amx1_out_ep: endpoint { + remote-endpoint = <&amx1_out_ep>; + }; + }; + + xbar_amx2_in1_port: port@23 { + reg = <0x23>; + + xbar_amx2_in1_ep: endpoint { + remote-endpoint = <&amx2_in1_ep>; + }; + }; + + xbar_amx2_in2_port: port@24 { + reg = <0x24>; + + xbar_amx2_in2_ep: endpoint { + remote-endpoint = <&amx2_in2_ep>; + }; + }; + + xbar_amx2_in3_port: port@25 { + reg = <0x25>; + + xbar_amx2_in3_ep: endpoint { + remote-endpoint = <&amx2_in3_ep>; + }; + }; + + xbar_amx2_in4_port: port@26 { + reg = <0x26>; + + xbar_amx2_in4_ep: endpoint { + remote-endpoint = <&amx2_in4_ep>; + }; + }; + + port@27 { + reg = <0x27>; + + xbar_amx2_out_ep: endpoint { + remote-endpoint = <&amx2_out_ep>; + }; + }; + + xbar_adx1_in_port: port@28 { + reg = <0x28>; + + xbar_adx1_in_ep: endpoint { + remote-endpoint = <&adx1_in_ep>; + }; + }; + + port@29 { + reg = <0x29>; + + xbar_adx1_out1_ep: endpoint { + remote-endpoint = <&adx1_out1_ep>; + }; + }; + + port@2a { + reg = <0x2a>; + + xbar_adx1_out2_ep: endpoint { + remote-endpoint = <&adx1_out2_ep>; + }; + }; + + port@2b { + reg = <0x2b>; + + xbar_adx1_out3_ep: endpoint { + remote-endpoint = <&adx1_out3_ep>; + }; + }; + + port@2c { + reg = <0x2c>; + + xbar_adx1_out4_ep: endpoint { + remote-endpoint = <&adx1_out4_ep>; + }; + }; + + xbar_adx2_in_port: port@2d { + reg = <0x2d>; + + xbar_adx2_in_ep: endpoint { + remote-endpoint = <&adx2_in_ep>; + }; + }; + + port@2e { + reg = <0x2e>; + + xbar_adx2_out1_ep: endpoint { + remote-endpoint = <&adx2_out1_ep>; + }; + }; + + port@2f { + reg = <0x2f>; + + xbar_adx2_out2_ep: endpoint { + remote-endpoint = <&adx2_out2_ep>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_adx2_out3_ep: endpoint { + remote-endpoint = <&adx2_out3_ep>; + }; + }; + + port@31 { + reg = <0x31>; + + xbar_adx2_out4_ep: endpoint { + remote-endpoint = <&adx2_out4_ep>; + }; + }; + + xbar_mixer_in1_port: port@32 { + reg = <0x32>; + + xbar_mixer_in1_ep: endpoint { + remote-endpoint = <&mixer_in1_ep>; + }; + }; + + xbar_mixer_in2_port: port@33 { + reg = <0x33>; + + xbar_mixer_in2_ep: endpoint { + remote-endpoint = <&mixer_in2_ep>; + }; + }; + + xbar_mixer_in3_port: port@34 { + reg = <0x34>; + + xbar_mixer_in3_ep: endpoint { + remote-endpoint = <&mixer_in3_ep>; + }; + }; + + xbar_mixer_in4_port: port@35 { + reg = <0x35>; + + xbar_mixer_in4_ep: endpoint { + remote-endpoint = <&mixer_in4_ep>; + }; + }; + + xbar_mixer_in5_port: port@36 { + reg = <0x36>; + + xbar_mixer_in5_ep: endpoint { + remote-endpoint = <&mixer_in5_ep>; + }; + }; + + xbar_mixer_in6_port: port@37 { + reg = <0x37>; + + xbar_mixer_in6_ep: endpoint { + remote-endpoint = <&mixer_in6_ep>; + }; + }; + + xbar_mixer_in7_port: port@38 { + reg = <0x38>; + + xbar_mixer_in7_ep: endpoint { + remote-endpoint = <&mixer_in7_ep>; + }; + }; + + xbar_mixer_in8_port: port@39 { + reg = <0x39>; + + xbar_mixer_in8_ep: endpoint { + remote-endpoint = <&mixer_in8_ep>; + }; + }; + + xbar_mixer_in9_port: port@3a { + reg = <0x3a>; + + xbar_mixer_in9_ep: endpoint { + remote-endpoint = <&mixer_in9_ep>; + }; + }; + + xbar_mixer_in10_port: port@3b { + reg = <0x3b>; + + xbar_mixer_in10_ep: endpoint { + remote-endpoint = <&mixer_in10_ep>; + }; + }; + + port@3c { + reg = <0x3c>; + + xbar_mixer_out1_ep: endpoint { + remote-endpoint = <&mixer_out1_ep>; + }; + }; + + port@3d { + reg = <0x3d>; + + xbar_mixer_out2_ep: endpoint { + remote-endpoint = <&mixer_out2_ep>; + }; + }; + + port@3e { + reg = <0x3e>; + + xbar_mixer_out3_ep: endpoint { + remote-endpoint = <&mixer_out3_ep>; + }; + }; + + port@3f { + reg = <0x3f>; + + xbar_mixer_out4_ep: endpoint { + remote-endpoint = <&mixer_out4_ep>; + }; + }; + + port@40 { + reg = <0x40>; + + xbar_mixer_out5_ep: endpoint { + remote-endpoint = <&mixer_out5_ep>; + }; + }; + + xbar_ope1_in_port: port@41 { + reg = <0x41>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@42 { + reg = <0x42>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; + + xbar_ope2_in_port: port@43 { + reg = <0x43>; + + xbar_ope2_in_ep: endpoint { + remote-endpoint = <&ope2_cif_in_ep>; + }; + }; + + port@44 { + reg = <0x44>; + + xbar_ope2_out_ep: endpoint { + remote-endpoint = <&ope2_cif_out_ep>; + }; + }; + }; + }; + + dma-controller@702e2000 { + status = "okay"; + }; + + interrupt-controller@702f9000 { + status = "okay"; + }; + }; + + sound { + compatible = "nvidia,tegra210-audio-graph-card"; + status = "okay"; + + dais = /* FE */ + <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, + <&admaif7_port>, <&admaif8_port>, <&admaif9_port>, + <&admaif10_port>, + /* Router */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>, + <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>, + <&xbar_dmic2_port>, <&xbar_dmic3_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>, + <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>, + <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, + <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, + <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_ope1_in_port>, <&xbar_ope2_in_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&mixer_out1_port>, <&mixer_out2_port>, + <&mixer_out3_port>, <&mixer_out4_port>, + <&mixer_out5_port>, + <&ope1_out_port>, <&ope2_out_port>, + /* I/O DAP Ports */ + <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, + <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>; + + label = "NVIDIA Jetson TX1 APE"; + }; +}; -- cgit v1.2.3