From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm64/crypto/sha1-ce-core.S | 150 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 150 insertions(+) create mode 100644 arch/arm64/crypto/sha1-ce-core.S (limited to 'arch/arm64/crypto/sha1-ce-core.S') diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S new file mode 100644 index 000000000..889ca0f89 --- /dev/null +++ b/arch/arm64/crypto/sha1-ce-core.S @@ -0,0 +1,150 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * sha1-ce-core.S - SHA-1 secure hash using ARMv8 Crypto Extensions + * + * Copyright (C) 2014 Linaro Ltd + */ + +#include +#include + + .text + .arch armv8-a+crypto + + k0 .req v0 + k1 .req v1 + k2 .req v2 + k3 .req v3 + + t0 .req v4 + t1 .req v5 + + dga .req q6 + dgav .req v6 + dgb .req s7 + dgbv .req v7 + + dg0q .req q12 + dg0s .req s12 + dg0v .req v12 + dg1s .req s13 + dg1v .req v13 + dg2s .req s14 + + .macro add_only, op, ev, rc, s0, dg1 + .ifc \ev, ev + add t1.4s, v\s0\().4s, \rc\().4s + sha1h dg2s, dg0s + .ifnb \dg1 + sha1\op dg0q, \dg1, t0.4s + .else + sha1\op dg0q, dg1s, t0.4s + .endif + .else + .ifnb \s0 + add t0.4s, v\s0\().4s, \rc\().4s + .endif + sha1h dg1s, dg0s + sha1\op dg0q, dg2s, t1.4s + .endif + .endm + + .macro add_update, op, ev, rc, s0, s1, s2, s3, dg1 + sha1su0 v\s0\().4s, v\s1\().4s, v\s2\().4s + add_only \op, \ev, \rc, \s1, \dg1 + sha1su1 v\s0\().4s, v\s3\().4s + .endm + + .macro loadrc, k, val, tmp + movz \tmp, :abs_g0_nc:\val + movk \tmp, :abs_g1:\val + dup \k, \tmp + .endm + + /* + * int sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src, + * int blocks) + */ +SYM_FUNC_START(sha1_ce_transform) + /* load round constants */ + loadrc k0.4s, 0x5a827999, w6 + loadrc k1.4s, 0x6ed9eba1, w6 + loadrc k2.4s, 0x8f1bbcdc, w6 + loadrc k3.4s, 0xca62c1d6, w6 + + /* load state */ + ld1 {dgav.4s}, [x0] + ldr dgb, [x0, #16] + + /* load sha1_ce_state::finalize */ + ldr_l w4, sha1_ce_offsetof_finalize, x4 + ldr w4, [x0, x4] + + /* load input */ +0: ld1 {v8.4s-v11.4s}, [x1], #64 + sub w2, w2, #1 + +CPU_LE( rev32 v8.16b, v8.16b ) +CPU_LE( rev32 v9.16b, v9.16b ) +CPU_LE( rev32 v10.16b, v10.16b ) +CPU_LE( rev32 v11.16b, v11.16b ) + +1: add t0.4s, v8.4s, k0.4s + mov dg0v.16b, dgav.16b + + add_update c, ev, k0, 8, 9, 10, 11, dgb + add_update c, od, k0, 9, 10, 11, 8 + add_update c, ev, k0, 10, 11, 8, 9 + add_update c, od, k0, 11, 8, 9, 10 + add_update c, ev, k1, 8, 9, 10, 11 + + add_update p, od, k1, 9, 10, 11, 8 + add_update p, ev, k1, 10, 11, 8, 9 + add_update p, od, k1, 11, 8, 9, 10 + add_update p, ev, k1, 8, 9, 10, 11 + add_update p, od, k2, 9, 10, 11, 8 + + add_update m, ev, k2, 10, 11, 8, 9 + add_update m, od, k2, 11, 8, 9, 10 + add_update m, ev, k2, 8, 9, 10, 11 + add_update m, od, k2, 9, 10, 11, 8 + add_update m, ev, k3, 10, 11, 8, 9 + + add_update p, od, k3, 11, 8, 9, 10 + add_only p, ev, k3, 9 + add_only p, od, k3, 10 + add_only p, ev, k3, 11 + add_only p, od + + /* update state */ + add dgbv.2s, dgbv.2s, dg1v.2s + add dgav.4s, dgav.4s, dg0v.4s + + cbz w2, 2f + cond_yield 3f, x5, x6 + b 0b + + /* + * Final block: add padding and total bit count. + * Skip if the input size was not a round multiple of the block size, + * the padding is handled by the C code in that case. + */ +2: cbz x4, 3f + ldr_l w4, sha1_ce_offsetof_count, x4 + ldr x4, [x0, x4] + movi v9.2d, #0 + mov x8, #0x80000000 + movi v10.2d, #0 + ror x7, x4, #29 // ror(lsl(x4, 3), 32) + fmov d8, x8 + mov x4, #0 + mov v11.d[0], xzr + mov v11.d[1], x7 + b 1b + + /* store new state */ +3: st1 {dgav.4s}, [x0] + str dgb, [x0, #16] + mov w0, w2 + ret +SYM_FUNC_END(sha1_ce_transform) -- cgit v1.2.3