From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm64/include/uapi/asm/kvm.h | 473 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 473 insertions(+) create mode 100644 arch/arm64/include/uapi/asm/kvm.h (limited to 'arch/arm64/include/uapi/asm/kvm.h') diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h new file mode 100644 index 000000000..a7a857f17 --- /dev/null +++ b/arch/arm64/include/uapi/asm/kvm.h @@ -0,0 +1,473 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2012,2013 - ARM Ltd + * Author: Marc Zyngier + * + * Derived from arch/arm/include/uapi/asm/kvm.h: + * Copyright (C) 2012 - Virtual Open Systems and Columbia University + * Author: Christoffer Dall + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef __ARM_KVM_H__ +#define __ARM_KVM_H__ + +#define KVM_SPSR_EL1 0 +#define KVM_SPSR_SVC KVM_SPSR_EL1 +#define KVM_SPSR_ABT 1 +#define KVM_SPSR_UND 2 +#define KVM_SPSR_IRQ 3 +#define KVM_SPSR_FIQ 4 +#define KVM_NR_SPSR 5 + +#ifndef __ASSEMBLY__ +#include +#include +#include +#include + +#define __KVM_HAVE_GUEST_DEBUG +#define __KVM_HAVE_IRQ_LINE +#define __KVM_HAVE_READONLY_MEM +#define __KVM_HAVE_VCPU_EVENTS + +#define KVM_COALESCED_MMIO_PAGE_OFFSET 1 +#define KVM_DIRTY_LOG_PAGE_OFFSET 64 + +#define KVM_REG_SIZE(id) \ + (1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) + +struct kvm_regs { + struct user_pt_regs regs; /* sp = sp_el0 */ + + __u64 sp_el1; + __u64 elr_el1; + + __u64 spsr[KVM_NR_SPSR]; + + struct user_fpsimd_state fp_regs; +}; + +/* + * Supported CPU Targets - Adding a new target type is not recommended, + * unless there are some special registers not supported by the + * genericv8 syreg table. + */ +#define KVM_ARM_TARGET_AEM_V8 0 +#define KVM_ARM_TARGET_FOUNDATION_V8 1 +#define KVM_ARM_TARGET_CORTEX_A57 2 +#define KVM_ARM_TARGET_XGENE_POTENZA 3 +#define KVM_ARM_TARGET_CORTEX_A53 4 +/* Generic ARM v8 target */ +#define KVM_ARM_TARGET_GENERIC_V8 5 + +#define KVM_ARM_NUM_TARGETS 6 + +/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */ +#define KVM_ARM_DEVICE_TYPE_SHIFT 0 +#define KVM_ARM_DEVICE_TYPE_MASK GENMASK(KVM_ARM_DEVICE_TYPE_SHIFT + 15, \ + KVM_ARM_DEVICE_TYPE_SHIFT) +#define KVM_ARM_DEVICE_ID_SHIFT 16 +#define KVM_ARM_DEVICE_ID_MASK GENMASK(KVM_ARM_DEVICE_ID_SHIFT + 15, \ + KVM_ARM_DEVICE_ID_SHIFT) + +/* Supported device IDs */ +#define KVM_ARM_DEVICE_VGIC_V2 0 + +/* Supported VGIC address types */ +#define KVM_VGIC_V2_ADDR_TYPE_DIST 0 +#define KVM_VGIC_V2_ADDR_TYPE_CPU 1 + +#define KVM_VGIC_V2_DIST_SIZE 0x1000 +#define KVM_VGIC_V2_CPU_SIZE 0x2000 + +/* Supported VGICv3 address types */ +#define KVM_VGIC_V3_ADDR_TYPE_DIST 2 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 +#define KVM_VGIC_ITS_ADDR_TYPE 4 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION 5 + +#define KVM_VGIC_V3_DIST_SIZE SZ_64K +#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) +#define KVM_VGIC_V3_ITS_SIZE (2 * SZ_64K) + +#define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ +#define KVM_ARM_VCPU_EL1_32BIT 1 /* CPU running a 32bit VM */ +#define KVM_ARM_VCPU_PSCI_0_2 2 /* CPU uses PSCI v0.2 */ +#define KVM_ARM_VCPU_PMU_V3 3 /* Support guest PMUv3 */ +#define KVM_ARM_VCPU_SVE 4 /* enable SVE for this CPU */ +#define KVM_ARM_VCPU_PTRAUTH_ADDRESS 5 /* VCPU uses address authentication */ +#define KVM_ARM_VCPU_PTRAUTH_GENERIC 6 /* VCPU uses generic authentication */ + +struct kvm_vcpu_init { + __u32 target; + __u32 features[7]; +}; + +struct kvm_sregs { +}; + +struct kvm_fpu { +}; + +/* + * See v8 ARM ARM D7.3: Debug Registers + * + * The architectural limit is 16 debug registers of each type although + * in practice there are usually less (see ID_AA64DFR0_EL1). + * + * Although the control registers are architecturally defined as 32 + * bits wide we use a 64 bit structure here to keep parity with + * KVM_GET/SET_ONE_REG behaviour which treats all system registers as + * 64 bit values. It also allows for the possibility of the + * architecture expanding the control registers without having to + * change the userspace ABI. + */ +#define KVM_ARM_MAX_DBG_REGS 16 +struct kvm_guest_debug_arch { + __u64 dbg_bcr[KVM_ARM_MAX_DBG_REGS]; + __u64 dbg_bvr[KVM_ARM_MAX_DBG_REGS]; + __u64 dbg_wcr[KVM_ARM_MAX_DBG_REGS]; + __u64 dbg_wvr[KVM_ARM_MAX_DBG_REGS]; +}; + +#define KVM_DEBUG_ARCH_HSR_HIGH_VALID (1 << 0) +struct kvm_debug_exit_arch { + __u32 hsr; + __u32 hsr_high; /* ESR_EL2[61:32] */ + __u64 far; /* used for watchpoints */ +}; + +/* + * Architecture specific defines for kvm_guest_debug->control + */ + +#define KVM_GUESTDBG_USE_SW_BP (1 << 16) +#define KVM_GUESTDBG_USE_HW (1 << 17) + +struct kvm_sync_regs { + /* Used with KVM_CAP_ARM_USER_IRQ */ + __u64 device_irq_level; +}; + +/* + * PMU filter structure. Describe a range of events with a particular + * action. To be used with KVM_ARM_VCPU_PMU_V3_FILTER. + */ +struct kvm_pmu_event_filter { + __u16 base_event; + __u16 nevents; + +#define KVM_PMU_EVENT_ALLOW 0 +#define KVM_PMU_EVENT_DENY 1 + + __u8 action; + __u8 pad[3]; +}; + +/* for KVM_GET/SET_VCPU_EVENTS */ +struct kvm_vcpu_events { + struct { + __u8 serror_pending; + __u8 serror_has_esr; + __u8 ext_dabt_pending; + /* Align it to 8 bytes */ + __u8 pad[5]; + __u64 serror_esr; + } exception; + __u32 reserved[12]; +}; + +struct kvm_arm_copy_mte_tags { + __u64 guest_ipa; + __u64 length; + void __user *addr; + __u64 flags; + __u64 reserved[2]; +}; + +#define KVM_ARM_TAGS_TO_GUEST 0 +#define KVM_ARM_TAGS_FROM_GUEST 1 + +/* If you need to interpret the index values, here is the key: */ +#define KVM_REG_ARM_COPROC_MASK 0x000000000FFF0000 +#define KVM_REG_ARM_COPROC_SHIFT 16 + +/* Normal registers are mapped as coprocessor 16. */ +#define KVM_REG_ARM_CORE (0x0010 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_CORE_REG(name) (offsetof(struct kvm_regs, name) / sizeof(__u32)) + +/* Some registers need more space to represent values. */ +#define KVM_REG_ARM_DEMUX (0x0011 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_DEMUX_ID_MASK 0x000000000000FF00 +#define KVM_REG_ARM_DEMUX_ID_SHIFT 8 +#define KVM_REG_ARM_DEMUX_ID_CCSIDR (0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT) +#define KVM_REG_ARM_DEMUX_VAL_MASK 0x00000000000000FF +#define KVM_REG_ARM_DEMUX_VAL_SHIFT 0 + +/* AArch64 system registers */ +#define KVM_REG_ARM64_SYSREG (0x0013 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM64_SYSREG_OP0_MASK 0x000000000000c000 +#define KVM_REG_ARM64_SYSREG_OP0_SHIFT 14 +#define KVM_REG_ARM64_SYSREG_OP1_MASK 0x0000000000003800 +#define KVM_REG_ARM64_SYSREG_OP1_SHIFT 11 +#define KVM_REG_ARM64_SYSREG_CRN_MASK 0x0000000000000780 +#define KVM_REG_ARM64_SYSREG_CRN_SHIFT 7 +#define KVM_REG_ARM64_SYSREG_CRM_MASK 0x0000000000000078 +#define KVM_REG_ARM64_SYSREG_CRM_SHIFT 3 +#define KVM_REG_ARM64_SYSREG_OP2_MASK 0x0000000000000007 +#define KVM_REG_ARM64_SYSREG_OP2_SHIFT 0 + +#define ARM64_SYS_REG_SHIFT_MASK(x,n) \ + (((x) << KVM_REG_ARM64_SYSREG_ ## n ## _SHIFT) & \ + KVM_REG_ARM64_SYSREG_ ## n ## _MASK) + +#define __ARM64_SYS_REG(op0,op1,crn,crm,op2) \ + (KVM_REG_ARM64 | KVM_REG_ARM64_SYSREG | \ + ARM64_SYS_REG_SHIFT_MASK(op0, OP0) | \ + ARM64_SYS_REG_SHIFT_MASK(op1, OP1) | \ + ARM64_SYS_REG_SHIFT_MASK(crn, CRN) | \ + ARM64_SYS_REG_SHIFT_MASK(crm, CRM) | \ + ARM64_SYS_REG_SHIFT_MASK(op2, OP2)) + +#define ARM64_SYS_REG(...) (__ARM64_SYS_REG(__VA_ARGS__) | KVM_REG_SIZE_U64) + +/* Physical Timer EL0 Registers */ +#define KVM_REG_ARM_PTIMER_CTL ARM64_SYS_REG(3, 3, 14, 2, 1) +#define KVM_REG_ARM_PTIMER_CVAL ARM64_SYS_REG(3, 3, 14, 2, 2) +#define KVM_REG_ARM_PTIMER_CNT ARM64_SYS_REG(3, 3, 14, 0, 1) + +/* + * EL0 Virtual Timer Registers + * + * WARNING: + * KVM_REG_ARM_TIMER_CVAL and KVM_REG_ARM_TIMER_CNT are not defined + * with the appropriate register encodings. Their values have been + * accidentally swapped. As this is set API, the definitions here + * must be used, rather than ones derived from the encodings. + */ +#define KVM_REG_ARM_TIMER_CTL ARM64_SYS_REG(3, 3, 14, 3, 1) +#define KVM_REG_ARM_TIMER_CVAL ARM64_SYS_REG(3, 3, 14, 0, 2) +#define KVM_REG_ARM_TIMER_CNT ARM64_SYS_REG(3, 3, 14, 3, 2) + +/* KVM-as-firmware specific pseudo-registers */ +#define KVM_REG_ARM_FW (0x0014 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \ + KVM_REG_ARM_FW | ((r) & 0xffff)) +#define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 KVM_REG_ARM_FW_REG(1) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2 + +/* + * Only two states can be presented by the host kernel: + * - NOT_REQUIRED: the guest doesn't need to do anything + * - NOT_AVAIL: the guest isn't mitigated (it can still use SSBS if available) + * + * All the other values are deprecated. The host still accepts all + * values (they are ABI), but will narrow them to the above two. + */ +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4) + +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3 KVM_REG_ARM_FW_REG(3) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED 2 + +/* SVE registers */ +#define KVM_REG_ARM64_SVE (0x15 << KVM_REG_ARM_COPROC_SHIFT) + +/* Z- and P-regs occupy blocks at the following offsets within this range: */ +#define KVM_REG_ARM64_SVE_ZREG_BASE 0 +#define KVM_REG_ARM64_SVE_PREG_BASE 0x400 +#define KVM_REG_ARM64_SVE_FFR_BASE 0x600 + +#define KVM_ARM64_SVE_NUM_ZREGS __SVE_NUM_ZREGS +#define KVM_ARM64_SVE_NUM_PREGS __SVE_NUM_PREGS + +#define KVM_ARM64_SVE_MAX_SLICES 32 + +#define KVM_REG_ARM64_SVE_ZREG(n, i) \ + (KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_ZREG_BASE | \ + KVM_REG_SIZE_U2048 | \ + (((n) & (KVM_ARM64_SVE_NUM_ZREGS - 1)) << 5) | \ + ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1))) + +#define KVM_REG_ARM64_SVE_PREG(n, i) \ + (KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_PREG_BASE | \ + KVM_REG_SIZE_U256 | \ + (((n) & (KVM_ARM64_SVE_NUM_PREGS - 1)) << 5) | \ + ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1))) + +#define KVM_REG_ARM64_SVE_FFR(i) \ + (KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_FFR_BASE | \ + KVM_REG_SIZE_U256 | \ + ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1))) + +/* + * Register values for KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() and + * KVM_REG_ARM64_SVE_FFR() are represented in memory in an endianness- + * invariant layout which differs from the layout used for the FPSIMD + * V-registers on big-endian systems: see sigcontext.h for more explanation. + */ + +#define KVM_ARM64_SVE_VQ_MIN __SVE_VQ_MIN +#define KVM_ARM64_SVE_VQ_MAX __SVE_VQ_MAX + +/* Vector lengths pseudo-register: */ +#define KVM_REG_ARM64_SVE_VLS (KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \ + KVM_REG_SIZE_U512 | 0xffff) +#define KVM_ARM64_SVE_VLS_WORDS \ + ((KVM_ARM64_SVE_VQ_MAX - KVM_ARM64_SVE_VQ_MIN) / 64 + 1) + +/* Bitmap feature firmware registers */ +#define KVM_REG_ARM_FW_FEAT_BMAP (0x0016 << KVM_REG_ARM_COPROC_SHIFT) +#define KVM_REG_ARM_FW_FEAT_BMAP_REG(r) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \ + KVM_REG_ARM_FW_FEAT_BMAP | \ + ((r) & 0xffff)) + +#define KVM_REG_ARM_STD_BMAP KVM_REG_ARM_FW_FEAT_BMAP_REG(0) + +enum { + KVM_REG_ARM_STD_BIT_TRNG_V1_0 = 0, +#ifdef __KERNEL__ + KVM_REG_ARM_STD_BMAP_BIT_COUNT, +#endif +}; + +#define KVM_REG_ARM_STD_HYP_BMAP KVM_REG_ARM_FW_FEAT_BMAP_REG(1) + +enum { + KVM_REG_ARM_STD_HYP_BIT_PV_TIME = 0, +#ifdef __KERNEL__ + KVM_REG_ARM_STD_HYP_BMAP_BIT_COUNT, +#endif +}; + +#define KVM_REG_ARM_VENDOR_HYP_BMAP KVM_REG_ARM_FW_FEAT_BMAP_REG(2) + +enum { + KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT = 0, + KVM_REG_ARM_VENDOR_HYP_BIT_PTP = 1, +#ifdef __KERNEL__ + KVM_REG_ARM_VENDOR_HYP_BMAP_BIT_COUNT, +#endif +}; + +/* Device Control API: ARM VGIC */ +#define KVM_DEV_ARM_VGIC_GRP_ADDR 0 +#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1 +#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2 +#define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32 +#define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT) +#define KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32 +#define KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \ + (0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT) +#define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0 +#define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT) +#define KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff) +#define KVM_DEV_ARM_VGIC_GRP_NR_IRQS 3 +#define KVM_DEV_ARM_VGIC_GRP_CTRL 4 +#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5 +#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6 +#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO 7 +#define KVM_DEV_ARM_VGIC_GRP_ITS_REGS 8 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT 10 +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \ + (0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) +#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK 0x3ff +#define VGIC_LEVEL_INFO_LINE_LEVEL 0 + +#define KVM_DEV_ARM_VGIC_CTRL_INIT 0 +#define KVM_DEV_ARM_ITS_SAVE_TABLES 1 +#define KVM_DEV_ARM_ITS_RESTORE_TABLES 2 +#define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3 +#define KVM_DEV_ARM_ITS_CTRL_RESET 4 + +/* Device Control API on vcpu fd */ +#define KVM_ARM_VCPU_PMU_V3_CTRL 0 +#define KVM_ARM_VCPU_PMU_V3_IRQ 0 +#define KVM_ARM_VCPU_PMU_V3_INIT 1 +#define KVM_ARM_VCPU_PMU_V3_FILTER 2 +#define KVM_ARM_VCPU_PMU_V3_SET_PMU 3 +#define KVM_ARM_VCPU_TIMER_CTRL 1 +#define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0 +#define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1 +#define KVM_ARM_VCPU_PVTIME_CTRL 2 +#define KVM_ARM_VCPU_PVTIME_IPA 0 + +/* KVM_IRQ_LINE irq field index values */ +#define KVM_ARM_IRQ_VCPU2_SHIFT 28 +#define KVM_ARM_IRQ_VCPU2_MASK 0xf +#define KVM_ARM_IRQ_TYPE_SHIFT 24 +#define KVM_ARM_IRQ_TYPE_MASK 0xf +#define KVM_ARM_IRQ_VCPU_SHIFT 16 +#define KVM_ARM_IRQ_VCPU_MASK 0xff +#define KVM_ARM_IRQ_NUM_SHIFT 0 +#define KVM_ARM_IRQ_NUM_MASK 0xffff + +/* irq_type field */ +#define KVM_ARM_IRQ_TYPE_CPU 0 +#define KVM_ARM_IRQ_TYPE_SPI 1 +#define KVM_ARM_IRQ_TYPE_PPI 2 + +/* out-of-kernel GIC cpu interrupt injection irq_number field */ +#define KVM_ARM_IRQ_CPU_IRQ 0 +#define KVM_ARM_IRQ_CPU_FIQ 1 + +/* + * This used to hold the highest supported SPI, but it is now obsolete + * and only here to provide source code level compatibility with older + * userland. The highest SPI number can be set via KVM_DEV_ARM_VGIC_GRP_NR_IRQS. + */ +#ifndef __KERNEL__ +#define KVM_ARM_IRQ_GIC_MAX 127 +#endif + +/* One single KVM irqchip, ie. the VGIC */ +#define KVM_NR_IRQCHIPS 1 + +/* PSCI interface */ +#define KVM_PSCI_FN_BASE 0x95c1ba5e +#define KVM_PSCI_FN(n) (KVM_PSCI_FN_BASE + (n)) + +#define KVM_PSCI_FN_CPU_SUSPEND KVM_PSCI_FN(0) +#define KVM_PSCI_FN_CPU_OFF KVM_PSCI_FN(1) +#define KVM_PSCI_FN_CPU_ON KVM_PSCI_FN(2) +#define KVM_PSCI_FN_MIGRATE KVM_PSCI_FN(3) + +#define KVM_PSCI_RET_SUCCESS PSCI_RET_SUCCESS +#define KVM_PSCI_RET_NI PSCI_RET_NOT_SUPPORTED +#define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS +#define KVM_PSCI_RET_DENIED PSCI_RET_DENIED + +/* arm64-specific kvm_run::system_event flags */ +/* + * Reset caused by a PSCI v1.1 SYSTEM_RESET2 call. + * Valid only when the system event has a type of KVM_SYSTEM_EVENT_RESET. + */ +#define KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 (1ULL << 0) + +/* run->fail_entry.hardware_entry_failure_reason codes. */ +#define KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED (1ULL << 0) + +#endif + +#endif /* __ARM_KVM_H__ */ -- cgit v1.2.3