From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm64/kernel/ftrace.c | 493 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 493 insertions(+) create mode 100644 arch/arm64/kernel/ftrace.c (limited to 'arch/arm64/kernel/ftrace.c') diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c new file mode 100644 index 000000000..5545fe1a9 --- /dev/null +++ b/arch/arm64/kernel/ftrace.c @@ -0,0 +1,493 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * arch/arm64/kernel/ftrace.c + * + * Copyright (C) 2013 Linaro Limited + * Author: AKASHI Takahiro + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS +struct fregs_offset { + const char *name; + int offset; +}; + +#define FREGS_OFFSET(n, field) \ +{ \ + .name = n, \ + .offset = offsetof(struct ftrace_regs, field), \ +} + +static const struct fregs_offset fregs_offsets[] = { + FREGS_OFFSET("x0", regs[0]), + FREGS_OFFSET("x1", regs[1]), + FREGS_OFFSET("x2", regs[2]), + FREGS_OFFSET("x3", regs[3]), + FREGS_OFFSET("x4", regs[4]), + FREGS_OFFSET("x5", regs[5]), + FREGS_OFFSET("x6", regs[6]), + FREGS_OFFSET("x7", regs[7]), + FREGS_OFFSET("x8", regs[8]), + + FREGS_OFFSET("x29", fp), + FREGS_OFFSET("x30", lr), + FREGS_OFFSET("lr", lr), + + FREGS_OFFSET("sp", sp), + FREGS_OFFSET("pc", pc), +}; + +int ftrace_regs_query_register_offset(const char *name) +{ + for (int i = 0; i < ARRAY_SIZE(fregs_offsets); i++) { + const struct fregs_offset *roff = &fregs_offsets[i]; + if (!strcmp(roff->name, name)) + return roff->offset; + } + + return -EINVAL; +} +#endif + +unsigned long ftrace_call_adjust(unsigned long addr) +{ + /* + * When using mcount, addr is the address of the mcount call + * instruction, and no adjustment is necessary. + */ + if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_ARGS)) + return addr; + + /* + * When using patchable-function-entry without pre-function NOPS, addr + * is the address of the first NOP after the function entry point. + * + * The compiler has either generated: + * + * addr+00: func: NOP // To be patched to MOV X9, LR + * addr+04: NOP // To be patched to BL + * + * Or: + * + * addr-04: BTI C + * addr+00: func: NOP // To be patched to MOV X9, LR + * addr+04: NOP // To be patched to BL + * + * We must adjust addr to the address of the NOP which will be patched + * to `BL `, which is at `addr + 4` bytes in either case. + * + */ + if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS)) + return addr + AARCH64_INSN_SIZE; + + /* + * When using patchable-function-entry with pre-function NOPs, addr is + * the address of the first pre-function NOP. + * + * Starting from an 8-byte aligned base, the compiler has either + * generated: + * + * addr+00: NOP // Literal (first 32 bits) + * addr+04: NOP // Literal (last 32 bits) + * addr+08: func: NOP // To be patched to MOV X9, LR + * addr+12: NOP // To be patched to BL + * + * Or: + * + * addr+00: NOP // Literal (first 32 bits) + * addr+04: NOP // Literal (last 32 bits) + * addr+08: func: BTI C + * addr+12: NOP // To be patched to MOV X9, LR + * addr+16: NOP // To be patched to BL + * + * We must adjust addr to the address of the NOP which will be patched + * to `BL `, which is at either addr+12 or addr+16 depending on + * whether there is a BTI. + */ + + if (!IS_ALIGNED(addr, sizeof(unsigned long))) { + WARN_RATELIMIT(1, "Misaligned patch-site %pS\n", + (void *)(addr + 8)); + return 0; + } + + /* Skip the NOPs placed before the function entry point */ + addr += 2 * AARCH64_INSN_SIZE; + + /* Skip any BTI */ + if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL)) { + u32 insn = le32_to_cpu(*(__le32 *)addr); + + if (aarch64_insn_is_bti(insn)) { + addr += AARCH64_INSN_SIZE; + } else if (insn != aarch64_insn_gen_nop()) { + WARN_RATELIMIT(1, "unexpected insn in patch-site %pS: 0x%08x\n", + (void *)addr, insn); + } + } + + /* Skip the first NOP after function entry */ + addr += AARCH64_INSN_SIZE; + + return addr; +} + +/* + * Replace a single instruction, which may be a branch or NOP. + * If @validate == true, a replaced instruction is checked against 'old'. + */ +static int ftrace_modify_code(unsigned long pc, u32 old, u32 new, + bool validate) +{ + u32 replaced; + + /* + * Note: + * We are paranoid about modifying text, as if a bug were to happen, it + * could cause us to read or write to someplace that could cause harm. + * Carefully read and modify the code with aarch64_insn_*() which uses + * probe_kernel_*(), and make sure what we read is what we expected it + * to be before modifying it. + */ + if (validate) { + if (aarch64_insn_read((void *)pc, &replaced)) + return -EFAULT; + + if (replaced != old) + return -EINVAL; + } + if (aarch64_insn_patch_text_nosync((void *)pc, new)) + return -EPERM; + + return 0; +} + +/* + * Replace tracer function in ftrace_caller() + */ +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long pc; + u32 new; + + /* + * When using CALL_OPS, the function to call is associated with the + * call site, and we don't have a global function pointer to update. + */ + if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS)) + return 0; + + pc = (unsigned long)ftrace_call; + new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func, + AARCH64_INSN_BRANCH_LINK); + + return ftrace_modify_code(pc, 0, new, false); +} + +static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr) +{ +#ifdef CONFIG_ARM64_MODULE_PLTS + struct plt_entry *plt = mod->arch.ftrace_trampolines; + + if (addr == FTRACE_ADDR) + return &plt[FTRACE_PLT_IDX]; +#endif + return NULL; +} + +/* + * Find the address the callsite must branch to in order to reach '*addr'. + * + * Due to the limited range of 'BL' instructions, modules may be placed too far + * away to branch directly and must use a PLT. + * + * Returns true when '*addr' contains a reachable target address, or has been + * modified to contain a PLT address. Returns false otherwise. + */ +static bool ftrace_find_callable_addr(struct dyn_ftrace *rec, + struct module *mod, + unsigned long *addr) +{ + unsigned long pc = rec->ip; + long offset = (long)*addr - (long)pc; + struct plt_entry *plt; + + /* + * When the target is within range of the 'BL' instruction, use 'addr' + * as-is and branch to that directly. + */ + if (offset >= -SZ_128M && offset < SZ_128M) + return true; + + /* + * When the target is outside of the range of a 'BL' instruction, we + * must use a PLT to reach it. We can only place PLTs for modules, and + * only when module PLT support is built-in. + */ + if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS)) + return false; + + /* + * 'mod' is only set at module load time, but if we end up + * dealing with an out-of-range condition, we can assume it + * is due to a module being loaded far away from the kernel. + * + * NOTE: __module_text_address() must be called with preemption + * disabled, but we can rely on ftrace_lock to ensure that 'mod' + * retains its validity throughout the remainder of this code. + */ + if (!mod) { + preempt_disable(); + mod = __module_text_address(pc); + preempt_enable(); + } + + if (WARN_ON(!mod)) + return false; + + plt = get_ftrace_plt(mod, *addr); + if (!plt) { + pr_err("ftrace: no module PLT for %ps\n", (void *)*addr); + return false; + } + + *addr = (unsigned long)plt; + return true; +} + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS +static const struct ftrace_ops *arm64_rec_get_ops(struct dyn_ftrace *rec) +{ + const struct ftrace_ops *ops = NULL; + + if (rec->flags & FTRACE_FL_CALL_OPS_EN) { + ops = ftrace_find_unique_ops(rec); + WARN_ON_ONCE(!ops); + } + + if (!ops) + ops = &ftrace_list_ops; + + return ops; +} + +static int ftrace_rec_set_ops(const struct dyn_ftrace *rec, + const struct ftrace_ops *ops) +{ + unsigned long literal = ALIGN_DOWN(rec->ip - 12, 8); + return aarch64_insn_write_literal_u64((void *)literal, + (unsigned long)ops); +} + +static int ftrace_rec_set_nop_ops(struct dyn_ftrace *rec) +{ + return ftrace_rec_set_ops(rec, &ftrace_nop_ops); +} + +static int ftrace_rec_update_ops(struct dyn_ftrace *rec) +{ + return ftrace_rec_set_ops(rec, arm64_rec_get_ops(rec)); +} +#else +static int ftrace_rec_set_nop_ops(struct dyn_ftrace *rec) { return 0; } +static int ftrace_rec_update_ops(struct dyn_ftrace *rec) { return 0; } +#endif + +/* + * Turn on the call to ftrace_caller() in instrumented function + */ +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long pc = rec->ip; + u32 old, new; + int ret; + + ret = ftrace_rec_update_ops(rec); + if (ret) + return ret; + + if (!ftrace_find_callable_addr(rec, NULL, &addr)) + return -EINVAL; + + old = aarch64_insn_gen_nop(); + new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK); + + return ftrace_modify_code(pc, old, new, true); +} + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS +int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, + unsigned long addr) +{ + if (WARN_ON_ONCE(old_addr != (unsigned long)ftrace_caller)) + return -EINVAL; + if (WARN_ON_ONCE(addr != (unsigned long)ftrace_caller)) + return -EINVAL; + + return ftrace_rec_update_ops(rec); +} +#endif + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS +/* + * The compiler has inserted two NOPs before the regular function prologue. + * All instrumented functions follow the AAPCS, so x0-x8 and x19-x30 are live, + * and x9-x18 are free for our use. + * + * At runtime we want to be able to swing a single NOP <-> BL to enable or + * disable the ftrace call. The BL requires us to save the original LR value, + * so here we insert a over the first NOP so the instructions + * before the regular prologue are: + * + * | Compiled | Disabled | Enabled | + * +----------+------------+------------+ + * | NOP | MOV X9, LR | MOV X9, LR | + * | NOP | NOP | BL | + * + * The LR value will be recovered by ftrace_caller, and restored into LR + * before returning to the regular function prologue. When a function is not + * being traced, the MOV is not harmful given x9 is not live per the AAPCS. + * + * Note: ftrace_process_locs() has pre-adjusted rec->ip to be the address of + * the BL. + */ +int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec) +{ + unsigned long pc = rec->ip - AARCH64_INSN_SIZE; + u32 old, new; + int ret; + + ret = ftrace_rec_set_nop_ops(rec); + if (ret) + return ret; + + old = aarch64_insn_gen_nop(); + new = aarch64_insn_gen_move_reg(AARCH64_INSN_REG_9, + AARCH64_INSN_REG_LR, + AARCH64_INSN_VARIANT_64BIT); + return ftrace_modify_code(pc, old, new, true); +} +#endif + +/* + * Turn off the call to ftrace_caller() in instrumented function + */ +int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, + unsigned long addr) +{ + unsigned long pc = rec->ip; + u32 old = 0, new; + int ret; + + new = aarch64_insn_gen_nop(); + + ret = ftrace_rec_set_nop_ops(rec); + if (ret) + return ret; + + /* + * When using mcount, callsites in modules may have been initalized to + * call an arbitrary module PLT (which redirects to the _mcount stub) + * rather than the ftrace PLT we'll use at runtime (which redirects to + * the ftrace trampoline). We can ignore the old PLT when initializing + * the callsite. + * + * Note: 'mod' is only set at module load time. + */ + if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_ARGS) && + IS_ENABLED(CONFIG_ARM64_MODULE_PLTS) && mod) { + return aarch64_insn_patch_text_nosync((void *)pc, new); + } + + if (!ftrace_find_callable_addr(rec, mod, &addr)) + return -EINVAL; + + old = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK); + + return ftrace_modify_code(pc, old, new, true); +} + +void arch_ftrace_update_code(int command) +{ + command |= FTRACE_MAY_SLEEP; + ftrace_modify_all_code(command); +} + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +/* + * function_graph tracer expects ftrace_return_to_handler() to be called + * on the way back to parent. For this purpose, this function is called + * in _mcount() or ftrace_caller() to replace return address (*parent) on + * the call stack to return_to_handler. + */ +void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent, + unsigned long frame_pointer) +{ + unsigned long return_hooker = (unsigned long)&return_to_handler; + unsigned long old; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + /* + * Note: + * No protection against faulting at *parent, which may be seen + * on other archs. It's unlikely on AArch64. + */ + old = *parent; + + if (!function_graph_enter(old, self_addr, frame_pointer, + (void *)frame_pointer)) { + *parent = return_hooker; + } +} + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS +void ftrace_graph_func(unsigned long ip, unsigned long parent_ip, + struct ftrace_ops *op, struct ftrace_regs *fregs) +{ + prepare_ftrace_return(ip, &fregs->lr, fregs->fp); +} +#else +/* + * Turn on/off the call to ftrace_graph_caller() in ftrace_caller() + * depending on @enable. + */ +static int ftrace_modify_graph_caller(bool enable) +{ + unsigned long pc = (unsigned long)&ftrace_graph_call; + u32 branch, nop; + + branch = aarch64_insn_gen_branch_imm(pc, + (unsigned long)ftrace_graph_caller, + AARCH64_INSN_BRANCH_NOLINK); + nop = aarch64_insn_gen_nop(); + + if (enable) + return ftrace_modify_code(pc, nop, branch, true); + else + return ftrace_modify_code(pc, branch, nop, true); +} + +int ftrace_enable_ftrace_graph_caller(void) +{ + return ftrace_modify_graph_caller(true); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + return ftrace_modify_graph_caller(false); +} +#endif /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */ +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ -- cgit v1.2.3