From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm64/lib/copy_template.S | 181 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 181 insertions(+) create mode 100644 arch/arm64/lib/copy_template.S (limited to 'arch/arm64/lib/copy_template.S') diff --git a/arch/arm64/lib/copy_template.S b/arch/arm64/lib/copy_template.S new file mode 100644 index 000000000..488df234c --- /dev/null +++ b/arch/arm64/lib/copy_template.S @@ -0,0 +1,181 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ + */ + + +/* + * Copy a buffer from src to dest (alignment handled by the hardware) + * + * Parameters: + * x0 - dest + * x1 - src + * x2 - n + * Returns: + * x0 - dest + */ +dstin .req x0 +src .req x1 +count .req x2 +tmp1 .req x3 +tmp1w .req w3 +tmp2 .req x4 +tmp2w .req w4 +dst .req x6 + +A_l .req x7 +A_h .req x8 +B_l .req x9 +B_h .req x10 +C_l .req x11 +C_h .req x12 +D_l .req x13 +D_h .req x14 + + mov dst, dstin + cmp count, #16 + /*When memory length is less than 16, the accessed are not aligned.*/ + b.lo .Ltiny15 + + neg tmp2, src + ands tmp2, tmp2, #15/* Bytes to reach alignment. */ + b.eq .LSrcAligned + sub count, count, tmp2 + /* + * Copy the leading memory data from src to dst in an increasing + * address order.By this way,the risk of overwriting the source + * memory data is eliminated when the distance between src and + * dst is less than 16. The memory accesses here are alignment. + */ + tbz tmp2, #0, 1f + ldrb1 tmp1w, src, #1 + strb1 tmp1w, dst, #1 +1: + tbz tmp2, #1, 2f + ldrh1 tmp1w, src, #2 + strh1 tmp1w, dst, #2 +2: + tbz tmp2, #2, 3f + ldr1 tmp1w, src, #4 + str1 tmp1w, dst, #4 +3: + tbz tmp2, #3, .LSrcAligned + ldr1 tmp1, src, #8 + str1 tmp1, dst, #8 + +.LSrcAligned: + cmp count, #64 + b.ge .Lcpy_over64 + /* + * Deal with small copies quickly by dropping straight into the + * exit block. + */ +.Ltail63: + /* + * Copy up to 48 bytes of data. At this point we only need the + * bottom 6 bits of count to be accurate. + */ + ands tmp1, count, #0x30 + b.eq .Ltiny15 + cmp tmp1w, #0x20 + b.eq 1f + b.lt 2f + ldp1 A_l, A_h, src, #16 + stp1 A_l, A_h, dst, #16 +1: + ldp1 A_l, A_h, src, #16 + stp1 A_l, A_h, dst, #16 +2: + ldp1 A_l, A_h, src, #16 + stp1 A_l, A_h, dst, #16 +.Ltiny15: + /* + * Prefer to break one ldp/stp into several load/store to access + * memory in an increasing address order,rather than to load/store 16 + * bytes from (src-16) to (dst-16) and to backward the src to aligned + * address,which way is used in original cortex memcpy. If keeping + * the original memcpy process here, memmove need to satisfy the + * precondition that src address is at least 16 bytes bigger than dst + * address,otherwise some source data will be overwritten when memove + * call memcpy directly. To make memmove simpler and decouple the + * memcpy's dependency on memmove, withdrew the original process. + */ + tbz count, #3, 1f + ldr1 tmp1, src, #8 + str1 tmp1, dst, #8 +1: + tbz count, #2, 2f + ldr1 tmp1w, src, #4 + str1 tmp1w, dst, #4 +2: + tbz count, #1, 3f + ldrh1 tmp1w, src, #2 + strh1 tmp1w, dst, #2 +3: + tbz count, #0, .Lexitfunc + ldrb1 tmp1w, src, #1 + strb1 tmp1w, dst, #1 + + b .Lexitfunc + +.Lcpy_over64: + subs count, count, #128 + b.ge .Lcpy_body_large + /* + * Less than 128 bytes to copy, so handle 64 here and then jump + * to the tail. + */ + ldp1 A_l, A_h, src, #16 + stp1 A_l, A_h, dst, #16 + ldp1 B_l, B_h, src, #16 + ldp1 C_l, C_h, src, #16 + stp1 B_l, B_h, dst, #16 + stp1 C_l, C_h, dst, #16 + ldp1 D_l, D_h, src, #16 + stp1 D_l, D_h, dst, #16 + + tst count, #0x3f + b.ne .Ltail63 + b .Lexitfunc + + /* + * Critical loop. Start at a new cache line boundary. Assuming + * 64 bytes per line this ensures the entire loop is in one line. + */ + .p2align L1_CACHE_SHIFT +.Lcpy_body_large: + /* pre-get 64 bytes data. */ + ldp1 A_l, A_h, src, #16 + ldp1 B_l, B_h, src, #16 + ldp1 C_l, C_h, src, #16 + ldp1 D_l, D_h, src, #16 +1: + /* + * interlace the load of next 64 bytes data block with store of the last + * loaded 64 bytes data. + */ + stp1 A_l, A_h, dst, #16 + ldp1 A_l, A_h, src, #16 + stp1 B_l, B_h, dst, #16 + ldp1 B_l, B_h, src, #16 + stp1 C_l, C_h, dst, #16 + ldp1 C_l, C_h, src, #16 + stp1 D_l, D_h, dst, #16 + ldp1 D_l, D_h, src, #16 + subs count, count, #64 + b.ge 1b + stp1 A_l, A_h, dst, #16 + stp1 B_l, B_h, dst, #16 + stp1 C_l, C_h, dst, #16 + stp1 D_l, D_h, dst, #16 + + tst count, #0x3f + b.ne .Ltail63 +.Lexitfunc: -- cgit v1.2.3