From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- arch/arm64/lib/strnlen.S | 162 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 162 insertions(+) create mode 100644 arch/arm64/lib/strnlen.S (limited to 'arch/arm64/lib/strnlen.S') diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S new file mode 100644 index 000000000..d5ac0e10a --- /dev/null +++ b/arch/arm64/lib/strnlen.S @@ -0,0 +1,162 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ + */ + +#include +#include + +/* + * determine the length of a fixed-size string + * + * Parameters: + * x0 - const string pointer + * x1 - maximal string length + * Returns: + * x0 - the return length of specific string + */ + +/* Arguments and results. */ +srcin .req x0 +len .req x0 +limit .req x1 + +/* Locals and temporaries. */ +src .req x2 +data1 .req x3 +data2 .req x4 +data2a .req x5 +has_nul1 .req x6 +has_nul2 .req x7 +tmp1 .req x8 +tmp2 .req x9 +tmp3 .req x10 +tmp4 .req x11 +zeroones .req x12 +pos .req x13 +limit_wd .req x14 + +#define REP8_01 0x0101010101010101 +#define REP8_7f 0x7f7f7f7f7f7f7f7f +#define REP8_80 0x8080808080808080 + +SYM_FUNC_START(__pi_strnlen) + cbz limit, .Lhit_limit + mov zeroones, #REP8_01 + bic src, srcin, #15 + ands tmp1, srcin, #15 + b.ne .Lmisaligned + /* Calculate the number of full and partial words -1. */ + sub limit_wd, limit, #1 /* Limit != 0, so no underflow. */ + lsr limit_wd, limit_wd, #4 /* Convert to Qwords. */ + + /* + * NUL detection works on the principle that (X - 1) & (~X) & 0x80 + * (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and + * can be done in parallel across the entire word. + */ + /* + * The inner loop deals with two Dwords at a time. This has a + * slightly higher start-up cost, but we should win quite quickly, + * especially on cores with a high number of issue slots per + * cycle, as we get much better parallelism out of the operations. + */ +.Lloop: + ldp data1, data2, [src], #16 +.Lrealigned: + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + sub tmp3, data2, zeroones + orr tmp4, data2, #REP8_7f + bic has_nul1, tmp1, tmp2 + bic has_nul2, tmp3, tmp4 + subs limit_wd, limit_wd, #1 + orr tmp1, has_nul1, has_nul2 + ccmp tmp1, #0, #0, pl /* NZCV = 0000 */ + b.eq .Lloop + + cbz tmp1, .Lhit_limit /* No null in final Qword. */ + + /* + * We know there's a null in the final Qword. The easiest thing + * to do now is work out the length of the string and return + * MIN (len, limit). + */ + sub len, src, srcin + cbz has_nul1, .Lnul_in_data2 +CPU_BE( mov data2, data1 ) /*perpare data to re-calculate the syndrome*/ + + sub len, len, #8 + mov has_nul2, has_nul1 +.Lnul_in_data2: + /* + * For big-endian, carry propagation (if the final byte in the + * string is 0x01) means we cannot use has_nul directly. The + * easiest way to get the correct byte is to byte-swap the data + * and calculate the syndrome a second time. + */ +CPU_BE( rev data2, data2 ) +CPU_BE( sub tmp1, data2, zeroones ) +CPU_BE( orr tmp2, data2, #REP8_7f ) +CPU_BE( bic has_nul2, tmp1, tmp2 ) + + sub len, len, #8 + rev has_nul2, has_nul2 + clz pos, has_nul2 + add len, len, pos, lsr #3 /* Bits to bytes. */ + cmp len, limit + csel len, len, limit, ls /* Return the lower value. */ + ret + +.Lmisaligned: + /* + * Deal with a partial first word. + * We're doing two things in parallel here; + * 1) Calculate the number of words (but avoiding overflow if + * limit is near ULONG_MAX) - to do this we need to work out + * limit + tmp1 - 1 as a 65-bit value before shifting it; + * 2) Load and mask the initial data words - we force the bytes + * before the ones we are interested in to 0xff - this ensures + * early bytes will not hit any zero detection. + */ + ldp data1, data2, [src], #16 + + sub limit_wd, limit, #1 + and tmp3, limit_wd, #15 + lsr limit_wd, limit_wd, #4 + + add tmp3, tmp3, tmp1 + add limit_wd, limit_wd, tmp3, lsr #4 + + neg tmp4, tmp1 + lsl tmp4, tmp4, #3 /* Bytes beyond alignment -> bits. */ + + mov tmp2, #~0 + /* Big-endian. Early bytes are at MSB. */ +CPU_BE( lsl tmp2, tmp2, tmp4 ) /* Shift (tmp1 & 63). */ + /* Little-endian. Early bytes are at LSB. */ +CPU_LE( lsr tmp2, tmp2, tmp4 ) /* Shift (tmp1 & 63). */ + + cmp tmp1, #8 + + orr data1, data1, tmp2 + orr data2a, data2, tmp2 + + csinv data1, data1, xzr, le + csel data2, data2, data2a, le + b .Lrealigned + +.Lhit_limit: + mov len, limit + ret +SYM_FUNC_END(__pi_strnlen) + +SYM_FUNC_ALIAS_WEAK(strnlen, __pi_strnlen) +EXPORT_SYMBOL_NOKASAN(strnlen) -- cgit v1.2.3